Step-1 Download MgCamd 1.35a Complete enigma1 from here:-
http://www.dreamboxtool.com/MGcamd/MgCamd-1-35a-Complete-e1.html (please do not unzip it)
Step-2 Download Softcam Keys from here:-
http://uploading.com/files/4am8e154/SoftCam.rar/ and unzip it
Step-3 Open “My Computer” and type “ftp://192.168.1.7” at address bar. (you have to enter your dreambox IP) and press “Enter”
Step-4
Step-5
Step-6
Step-7
Step-8
Step-9
Step-10
Step-11
Step-12 NOW CLOSE ALL FROM COMPUTER AND REBOOT YOUR RECIEVER
Step-13 Open “Blue Pane” from remote and goto “Addons” and press OK
Step-14 Scroll down to “Manual install” and press OK
Step-15 Goto “el-mgcamd_1.35a_100126.tar.gz” and press OK
Step-16 After that receiver will install MgCamd and fallow the instructions on the screen and exit all when it is finished. Reboot receiver.
Step-17 Now again open “Blue Panel” and press right arrow as indicated until you see “MgCamd 1.35a”
Step-18 Now scroll down to “Start/Restart Camd” and press OK
Step-19 A Message will appear and your receiver will be set on MgCamd. Now “restart enigma” as shown
Step-20 Now goto PTV Feeds and it will be OK
DEAR EXPERT HELP ME.I AM USING GP GAMINI 470 NON BOMB IMAGE.IENSERTED MGCAMP 1.35A ZIP FILE TO "TMP"FOLDER AND SOFTCAM KEYS TO VER/KEYS FOLDER WITH CROSWORD CABLE ALSO WITH DCC. BUT WHEN I GO TO MENUEL INSTALL AND PRESS TMP FOLDER ."THER IS NO MGCAMP 1.35a ZIP FILE.BUT I CAN FIND SOFTCAM KEYS TO VER/KEYS FOLDER. What can i do NOW?
http://www.dreamboxtool.com/MGcamd/MgCamd-1-35a-Complete-e1.html (please do not unzip it)
Step-2 Download Softcam Keys from here:-
http://uploading.com/files/4am8e154/SoftCam.rar/ and unzip it
Step-3 Open “My Computer” and type “ftp://192.168.1.7” at address bar. (you have to enter your dreambox IP) and press “Enter”
Step-4
Step-5
Step-6
Step-7
Step-8
Step-9
Step-10
Step-11
Step-12 NOW CLOSE ALL FROM COMPUTER AND REBOOT YOUR RECIEVER
Step-13 Open “Blue Pane” from remote and goto “Addons” and press OK
Step-14 Scroll down to “Manual install” and press OK
Step-15 Goto “el-mgcamd_1.35a_100126.tar.gz” and press OK
Step-16 After that receiver will install MgCamd and fallow the instructions on the screen and exit all when it is finished. Reboot receiver.
Step-17 Now again open “Blue Panel” and press right arrow as indicated until you see “MgCamd 1.35a”
Step-18 Now scroll down to “Start/Restart Camd” and press OK
Step-19 A Message will appear and your receiver will be set on MgCamd. Now “restart enigma” as shown
Step-20 Now goto PTV Feeds and it will be OK
DEAR EXPERT HELP ME.I AM USING GP GAMINI 470 NON BOMB IMAGE.IENSERTED MGCAMP 1.35A ZIP FILE TO "TMP"FOLDER AND SOFTCAM KEYS TO VER/KEYS FOLDER WITH CROSWORD CABLE ALSO WITH DCC. BUT WHEN I GO TO MENUEL INSTALL AND PRESS TMP FOLDER ."THER IS NO MGCAMP 1.35a ZIP FILE.BUT I CAN FIND SOFTCAM KEYS TO VER/KEYS FOLDER. What can i do NOW?