problem barry alen Dm 800 se v2

behnam · Sep 5, 2013

Hello
I install Barry Alen in Dm 800 se V2, but after reboot its not in my plugin!!!

Code:

root@dm800sev2:~# opkg install /tmp/1.ipk                                      
Installing enigma2-plugin-extensions-barryallen (10.0.5) to root...            
=================================================================              
Installing Barry Allen                                                         
=================================================================              
Barry Allen stops automount, reboot after installation to get it back          
Barry Allen stops udev, reboot after installation to get it back               
Barry Allen already installed, no Format needed                                
You can relax now !                                                            
Configuring enigma2-plugin-extensions-barryallen.                              
Barry Allen feels home at /dev/sdb1                                            
=================================================================              
Barry Allen installation or upgrade is now finished !                          
If this is a new installation, then please reboot NOW                          
to check if Barry Allen Plugin shows up in the Plugin List !                   
=================================================================              
root@dm800sev2:~#                                                              
Broadcast message from root@dm800sev2 (console) (Thu Jan  1 01:02:58 1970):    
The system is going down for reboot NOW!                                       
                                                                               
                                                      
                                                         
                                                                               /

behnam · Sep 14, 2013

I try it again with new version BA still same problem!!!

frank087234 · Sep 14, 2013

what image do u use? and what usb flash??

behnam · Sep 15, 2013

frank087234 said:
what image do u use? and what usb flash??

I tried with CVS and Elite its same problem!

frank087234 · Sep 15, 2013

behnam said:
I tried with CVS and Elite its same problem!

telnet this, and tell me result

Code:

ls -s /media

then

Code:

ls -s /media/ba

behnam · Sep 15, 2013

frank087234 said:
telnet this, and tell me result

Code:

ls -s /media

then

Code:

ls -s /media/ba

after restart Dm :

Code:

root@dm800sev2:~# ls -s /media                                             
     0 ba           0 cf           0 mmc1         0 ram          0 union   
     0 card         4 hdd          0 net          0 realroot       0 usb   
root@dm800sev2:~# ls -s /media/ba                                          
root@dm800sev2:~#

frank087234 · Sep 15, 2013

OK good
NOW
Telnet this

Code:

df -h

and show me result
Sorry I should ve put this Telnet command in my previous post!!

Egypt · Sep 15, 2013

Installing enigma2-plugin-extensions-barryallen (10.0.5) to root...

I do not think you can upgrade from 10.0.5 because the 10.0.5 is not for the new V2 Dreambox.
Therefore remove the old version and format the Usb device to reinstall the new 11.0

behnam · Sep 16, 2013

frank087234 said:
OK good
NOW
Telnet this

Code:

df -h

and show me result
Sorry I should ve put this Telnet command in my previous post!!

PHP:

root@dm800sev2:~# df -h                                                   
Filesystem                Size      Used Available Use% Mounted on        
ubi0:rootfs             369.9M     81.5M    288.4M  22% /                 
devtmpfs                154.8M         0    154.8M   0% /dev              
none                    154.9M    668.0K    154.2M   0% /var/volatile     
/dev/mtdblock2            7.0M      3.8M      3.2M  55% /boot             
/dev/ubi0_1             525.7M     24.0K    521.0M   0% /data             
/dev/disk/by-uuid/8aa20883-5bd3-4bb5-b09d-37b4c030a4fe                    
                        232.8G      8.7G    224.1G   4% /media/hdd        
root@dm800sev2:~#

frank087234 · Sep 16, 2013

telnet this, then rboot, and show me result
mount /dev/sdb1 /mnt/ba

If does not work, after reboot, telnet this:
fdisk -l
and show me result.

behnam · Sep 16, 2013

frank087234 said:
telnet this, then rboot, and show me result
mount /dev/sdb1 /mnt/ba

If does not work, after reboot, telnet this:
fdisk -l
and show me result.

Fierst command nothing happend!
second...:

PHP:

Units = cylinders of 16065 * 512 = 8225280 bytes                      
                                                                      
Disk /dev/mtdblock2 doesn't contain a valid partition table           
                                                                      
Disk /dev/mtdblock3: 1064 MB, 1064828928 bytes                        
255 heads, 63 sectors/track, 129 cylinders                            
Units = cylinders of 16065 * 512 = 8225280 bytes                      
                                                                      
Disk /dev/mtdblock3 doesn't contain a valid partition table           
                                                                      
Disk /dev/sda: 250.0 GB, 250059350016 bytes                           
255 heads, 63 sectors/track, 30401 cylinders                          
Units = cylinders of 16065 * 512 = 8225280 bytes                      
                                                                      
   Device Boot      Start         End      Blocks  Id System          
/dev/sda1               1       30401   244196028+ 83 Linux           
                                                                      
Disk /dev/sdb: 4022 MB, 4022337536 bytes                              
255 heads, 63 sectors/track, 489 cylinders                            
Units = cylinders of 16065 * 512 = 8225280 bytes                      
                                                                      
   Device Boot      Start         End      Blocks  Id System          
/dev/sdb1               1         489     3927861  83 Linux

frank087234 · Sep 17, 2013

Try telnet this

mount /dev/sdb /mnt/ba

Reboot...

behnam · Sep 17, 2013

frank087234 said:
Try telnet this

mount /dev/sdb /mnt/ba

Reboot...

PHP:

root@dm800sev2:~# mount /dev/sdb /mnt/ba                     
mount: mounting /dev/sdb on /mnt/ba failed: Invalid argument 
root@dm800sev2:~#

frank087234 · Sep 17, 2013

The strange thing is ur usb did not appear in the df -h result
Yiu need to format it fully on ur pc, fat32, then plug it in ur receiver, turn it off, then on again ... and after reboot .. telnet df -h and check if sdb1 is on the result...

behnam · Sep 17, 2013

frank087234 said:
The strange thing is ur usb did not appear in the df -h result
Yiu need to format it fully on ur pc, fat32, then plug it in ur receiver, turn it off, then on again ... and after reboot .. telnet df -h and check if sdb1 is on the result...

4 time i format usb to fat 32 still same i change usb with another model same!!
i asked heir :

Code:

http://www.oozoon-board.de/wbb/index.php?page=Thread&postID=20941#post20941

I dont understand exactly!

frank087234 · Sep 18, 2013

Ok after format to fat32
DO this telnet
mkfs.ext3 /dev/sdb1

Egypt · Sep 18, 2013

If you do not remove the wrong version 10.0.5 you have installed on your box the Usb will not mount.
The wrong version is not only on the stick part of it is also on the box.
Better to start from scratch,install new original based Image,format Usb on the Pc ,disconnect the box and ad the stick.
Install Barry Allen 11.0 and restart the box.

behnam · Sep 19, 2013

Egypt said:
If you do not remove the wrong version 10.0.5 you have installed on your box the Usb will not mount.
The wrong version is not only on the stick part of it is also on the box.
Better to start from scratch,install new original based Image,format Usb on the Pc ,disconnect the box and ad the stick.
Install Barry Allen 11.0 and restart the box.

I format usb with pc , change image to cvs install BA 11.0.1
still same problem

PHP:

root@dm800sev2:~# opkg install /tmp/*.ipk                                
Installing enigma2-plugin-extensions-barryallen (11.0.1) to root...      
=================================================================        
Installing Barry Allen                                                   
=================================================================        
Barry Allen stops automount, reboot after installation to get it back    
Barry Allen stops udev, reboot after installation to get it back         
Barry Allen will be on device /dev/sdb1 !                                
Erasing Barry Allen device ...                                           
Making empty ext4 Filesystem ...                                         
Configuring enigma2-plugin-extensions-barryallen.                        
Barry Allen feels home at /dev/sdb1                                      
=================================================================        
Barry Allen installation or upgrade is now finished !                    
If this is a new installation, then please reboot NOW                    
to check if Barry Allen Plugin shows up in the Plugin List !             
=================================================================        
root@dm800sev2:~#

behnam · Sep 19, 2013

frank087234 said:
Ok after format to fat32
DO this telnet
mkfs.ext3 /dev/sdb1

PHP:

root@dm800sev2:~# mkfs.ext3 /dev/sdb1                                
mke2fs 1.42.1 (17-Feb-2012)                                          
Filesystem label=                                                    
OS type: Linux                                                       
Block size=4096 (log=2)                                              
Fragment size=4096 (log=2)                                           
Stride=0 blocks, Stripe width=0 blocks                               
245760 inodes, 981965 blocks                                         
49098 blocks (5.00%) reserved for the super user                     
First data block=0                                                   
Maximum filesystem blocks=1006632960                                 
30 block groups                                                      
32768 blocks per group, 32768 fragments per group                    
8192 inodes per group                                                
Superblock backups stored on blocks:                                 
        32768, 98304, 163840, 229376, 294912, 819200, 884736         
                                                                     
Allocating group tables: done                                        
Writing inode tables: done                                           
Creating journal (16384 blocks): done                                
Writing superblocks and filesystem accounting information: done      
                                                                     
root@dm800sev2:~#

Egypt · Sep 19, 2013

behnam said:

I format usb with pc , change image to cvs install BA 11.0.1
still same problem

PHP:

root@dm800sev2:~# opkg install /tmp/*.ipk                                
Installing enigma2-plugin-extensions-barryallen (11.0.1) to root...      
=================================================================        
Installing Barry Allen                                                   
=================================================================        
Barry Allen stops automount, reboot after installation to get it back    
Barry Allen stops udev, reboot after installation to get it back         
Barry Allen will be on device /dev/sdb1 !                                
Erasing Barry Allen device ...                                           
Making empty ext4 Filesystem ...                                         
Configuring enigma2-plugin-extensions-barryallen.                        
Barry Allen feels home at /dev/sdb1                                      
=================================================================        
Barry Allen installation or upgrade is now finished !                    
If this is a new installation, then please reboot NOW                    
to check if Barry Allen Plugin shows up in the Plugin List !             
=================================================================        
root@dm800sev2:~#

All this is correct now and as I can see you have the new Barry Allen Version and the usb device is mounted.
After reboot you must find the plug-in under extensions.
nu

problem barry alen Dm 800 se v2

behnam

Registered

behnam

Registered

frank087234

Registered

behnam

Registered

frank087234

Registered

behnam

Registered

frank087234

Registered

Egypt

behnam

Registered

frank087234

Registered

behnam

Registered

frank087234

Registered

behnam

Registered

frank087234

Registered

behnam

Registered

frank087234

Registered

Egypt

behnam

Registered

behnam

Registered

Egypt