You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
PowerVu Chat [only chat, don‘t post keys here]
- Thread starter slugworth
- Start date
wait, this has been going on since 2012, the first conversion should take place in 2014, but because of the contract with "digitalglue" (system integration and technology offerer) did not come about.
- here you have to exchange ~ 150000 decoder in overseas
- a dozen domestic and international satellite systems
- hundreds of commercial as well as national cable networks.
- here you have to exchange ~ 150000 decoder in overseas
- a dozen domestic and international satellite systems
- hundreds of commercial as well as national cable networks.
wait, this has been going on since 2012, the first conversion should take place in 2014, but because of the contract with "digitalglue" (system integration and technology offerer) did not come about.
- here you have to exchange ~ 150000 decoder in overseas
- a dozen domestic and international satellite systems
- hundreds of commercial as well as national cable networks.
There aren't 150 000 UAs in the EMM stream, so there can't be 150 000 decoders to be exchanged. From the 80 000 or so UAs, many belong to "new" D9865 decoders, those won't need exchanging, just a simple firmware upgrade. So the number of old and active decoders could be less than 20000 even. Any active UA starting at 50 won't probably need exchanging.
Cable networks aren't really a problem - how many of those carry AFN? None in the US, few in Germany, but the number is very small and I really doubt they would be using the old decoders anyway. The D9865 has been around for quite a few years now.
Martin.Wigston
Registered
- Messages
- 973
Reading the FAQ, makes be believe it should still be viewable.
They say the cisco 9865 which only seems to support powervu, will still be able to receive the new HD channels just not all features.
They say the cisco 9865 which only seems to support powervu, will still be able to receive the new HD channels just not all features.
librariandvb
Donating Member
- Messages
- 606
Last Date of Support: September 30, 2018
The last date to receive applicable service and support for the product as entitled by active service contracts
or by warranty terms and conditions. After this date, all support services for the product are unavailable,
and the product becomes obsolete**. Warranty duration is based on product ship dates; refer to warranty terms
and conditions for details.
source http://www.cisco.com/c/en/us/produc...l-encoders/end_of_life_notice_c51-727536.html
The last date to receive applicable service and support for the product as entitled by active service contracts
or by warranty terms and conditions. After this date, all support services for the product are unavailable,
and the product becomes obsolete**. Warranty duration is based on product ship dates; refer to warranty terms
and conditions for details.
source http://www.cisco.com/c/en/us/produc...l-encoders/end_of_life_notice_c51-727536.html
Reading the FAQ, makes be believe it should still be viewable.
They say the cisco 9865 which only seems to support powervu, will still be able to receive the new HD channels just not all features.
sure, if you own a Cisco D9865 and if you're authorized to view AFN, you'll continue watching
After reading the complete FAQ, I'd say AFN are pretty confident that whatever patch they'll upload to the D9865, it will stop piracy, which means they won't need to change keys anymore. And after seeing what MTN did, I have no problem believing this.
Last edited:
true - but the ones Dog man Knows i will be mainly using it for at this stage are sd
but still it would be good to get an opinion on best picture quality rendering on powervu boxs
ahh
i use streams atm and record online , but was looking to use a box recording for more consistent and long period recording.
stream relay works on some boxs . would it be harder re setting up and recording .
i do a lot of greyhound racing videos for anybody that doesn;t know already. and that's why i'm trying to sort out the best way to go
i use streams atm and record online , but was looking to use a box recording for more consistent and long period recording.
stream relay works on some boxs . would it be harder re setting up and recording .
i do a lot of greyhound racing videos for anybody that doesn;t know already. and that's why i'm trying to sort out the best way to go
The Freesat V7 Max does a good job
had a quick look , seems to have powervu menu in the setup
looks a cheap enough box
did u record much from powervu
Hopefully someone here can help.
Even with what looks like a correctly decoded ECM, the CWs seems to be wrong sometimes.
I'll post two examples: one where the CWs are correct, one where they are not, using the same code.
(no keys here)
Working (using standard sbox) :
decrypted part1: c0 1e 79 07 b1 a0 80 2b 07 7a d4 b0 f9 80
SeedBase: c0 1e 79 07
decrypted part2: 1C 00 F6 08 18 01 01 F6 8F 14 BC BD 01 81 A0 81 A0 00 00 00 83 00 80 00 3D AF 00
SR for Seeds: AD 06 EB 0A C8 CF 00
Video seed: BC 45 85 36
Base CW: 80 2b 07 7a d4 b0 f9
Video CW (before expand): 3c 6e 82 4c 68 f5 7c
Not working (using alternate sbox) :
decrypted Part1: 50 8c 86 86 12 a8 a7 28 0a bc 8e 65 a2 a7
SeedBase: 50 8c 86 86
decrypted part2: D9 00 C2 AD C9 01 01 52 04 DC DB A7 02 02 A0 00 D0 00 00 00 97 00 00 00 62 06 60
SR for Seeds: EA 9D AA 2C 59 B7 C1
What should be the correct video seed, baseCW and Video CW (before expand) be here?
Even with what looks like a correctly decoded ECM, the CWs seems to be wrong sometimes.
I'll post two examples: one where the CWs are correct, one where they are not, using the same code.
(no keys here)
Working (using standard sbox) :
decrypted part1: c0 1e 79 07 b1 a0 80 2b 07 7a d4 b0 f9 80
SeedBase: c0 1e 79 07
decrypted part2: 1C 00 F6 08 18 01 01 F6 8F 14 BC BD 01 81 A0 81 A0 00 00 00 83 00 80 00 3D AF 00
SR for Seeds: AD 06 EB 0A C8 CF 00
Video seed: BC 45 85 36
Base CW: 80 2b 07 7a d4 b0 f9
Video CW (before expand): 3c 6e 82 4c 68 f5 7c
Not working (using alternate sbox) :
decrypted Part1: 50 8c 86 86 12 a8 a7 28 0a bc 8e 65 a2 a7
SeedBase: 50 8c 86 86
decrypted part2: D9 00 C2 AD C9 01 01 52 04 DC DB A7 02 02 A0 00 D0 00 00 00 97 00 00 00 62 06 60
SR for Seeds: EA 9D AA 2C 59 B7 C1
What should be the correct video seed, baseCW and Video CW (before expand) be here?
Coder
I have never tried,but there is an option in powervu emu to decrypt the ecm/emm offline,from a file.
I am not sure what debug options or what would be printed out in the results file,but if you do not have it or use it,I can try,given you post the ecm packet.
Maybe debug can show the correct values.
I have never tried,but there is an option in powervu emu to decrypt the ecm/emm offline,from a file.
I am not sure what debug options or what would be printed out in the results file,but if you do not have it or use it,I can try,given you post the ecm packet.
Maybe debug can show the correct values.