PLi® Jade - for the Dreambox DM500

[Herco M.]

Is it safe to run this image on a clone DM500S?

 

[boxgot]

Hi Herco M
I'm not sure but,it should be safe ,to run this image.At least they from pli team dont give us any warnings about that.
And i dont belive that they not warn us if there any problem is.They would not blamage their own good work!!

 

[flatdish2]

Is it safe to run this image on a clone DM500S?

good day m8,i use to my dm500s,its ok and safe to load to my clone dm500s..:thum:

 

[lif004]

hopeless newbie

managed to get image flashed,not sure what sat I need only looking for expressvu...

thanks

 

[sudhi]

thanks
this looking nise image
then how can i put threw the lanline this emage
this emage only work serial
thare is any way 2 threw the lant line

 

[mastersonsky]

I love this img, however




Setting up lnbs can be a problem. I will set them once in one config and then need to reload the box and then they do not work. any ids?

 

[vincent.l1]

thx

Fixed Version

thx a lot. is there the latest release nowadays ??

 

[aatee]

PLI-Jade latest image comes
fully installed to work with
Gbox2.1b
CcCam 2.0.11 (latest)
Both emulators are working together

Gbox Share Center 1.50 added
Stable and fast sharing

Note: the file should be sent to your DM500S via Flashwizard

admin, i tried to upload image file here but my account had not permission to upload
that is why i am giving download link.

 

[humptydumpty]

Dear Aatee,

PLI-Jade fully installed to work with
Gbox2.1b
CcCam 2.0.11 (latest)
Both emulators are working together

If you have a Pli-jade like that working can I have a copy of it please. I can't get Gbox and Cccam working together.
Let alone get Gbox Share Center 1.50 working op pli jade.

Thx,
Humptydumpty

 

[salaktus]

PLi® Jade Final Dm500 > NOT for + Version​

A new Enigma1 PLi® Dreambox release is available for download.

* PLi®-Jade-DM500

See below for what's new & fixed since the initial PLi® Jade RC release



Highlights:
- Satellite.xml split in Ka, Ku, C, S, L band
- Remote control behaviour reverted to pre-Jade
* (Some remotes suffered from very bad reception in the Jade RC)
- North America scan fix by Updatelee
- CDK Flashtool: support flashing between standard partition layout and 'MaxVar' partition layout!
* ('Var' partition is erased when the layout changes)
- Rotor improvement for the OpenEmbedded (OE) boxes


Enigma1:
- CVS Repository June 29th 2008
- PLi® Repository September 29th 2008
- CDK Flashtool: support flashing between standard partition layout and 'MaxVar' partition layout
* ('Var' partition is erased when the layout changes)
- Enigma Movieplayer fixed by ims
- Default sleeptimer now 30 minutes
- Insert and delete character support for DM500 remotes (Red and Green)
* Now Red (delete) en Green (insert) can be used.
* For all other boxes Vol+/Vol- and Red/Green can be used - it does not care...
- Remote control behaviour restored to pre-Jade
- Fixed 'DM7000 style' remote control for DM500
* (Added the ability to use the DM600, 7000, 7020 large remote on your DM500, DM56x0)
- Show serviceselector again with TV/RADIO key, but only if the mode already was TV resp. RADIO.
* Toggling TV/RADIO doesn't bring up the service selector
- Timeshift delay input value limited to 999 instead of 60 seconds
- Timeshift / recording support for DM500+ (settings equal to DM600)
- Rotor improvement for the OpenEmbedded (OE) boxes
* (Smooth start and faster rotating at 18 V, motor stop detection improved)


Plugins:
- Bitrate plugin fixes for NTSC


PPanel:
- Channelsetting reload in PPanel fixed


EPG Features:
- Use audio key for searchEPG in EPG channel


OSD Features:
- OSD transparancy setting in smaller steps for DM500+ and DM600 (5 instead of 25)


Web Interface Fixes:
- Some info in WebIf missing for IE fixed by ims


Network:
- Enable network and DHCP as default in case the Enigma config is not copied from /Var_init
* May fix some move /Var to network issues
- Do NOT add manually created mounts to the Enigma mount.conf
* It can cause double mounts if such a mount was already done in /Var/etc/init


Highlights DM500 MaxVar:
We've created 1Mb extra /Var space for you...
The removed items are now available via the PLi® downloads at the Software Management

We rebuilt the internal Flash tool completely!
So now you can flash back and forward between the standard PLi DM500 images and the PLi DM500-MaxVar images without using the serial cable!!!

We advise you to use the 'root.cramfs' method for this!
See the url below on how to Flash your DM500 via the 'root.cramfs' method:

See our DM500 Installation Wiki...

Moved to Software Management downloads:
- MV EPG plugin, Mediapli_8 skin, CCcam SoftCam, Cables/Terrestrial.xml, Translations, Games, traceroute, nslookup, IPtables, Netfilter drivers


Further:
- Thanks to Updatelee for North America scan fix

Thanks to the PLi testers for several fixes and features


Support:
- Online update support (IPKG feed) for OpenEmbedded boxes
* (DM500Plus/DM600/DM7020)
- Global satellites.xml updated September 29th 2008
* (DVB-S: FEC = Automatic; DVB-S2: FEC = Normal; DVB-S2 can't handle auto-FEC)
- Satellites.xml split in Ka, Ku, C, S, L band​

HELLO,
For the sharing
What is the better?pli jade or darksat
tks