osn (orbit showtime network) well be hacked soon or not ? )
- Thread starter Mr.DreaM
- Start date
- Messages
- 24,808
i dont think so after 2 years and still nothing betacrypt i think is noth the issue but Irdeto 2 this i think wont work since its secure and nobody has had a soloution for Irdeto2 and dont look like there will be any fix anytime soon for this encryption method .
mmc-jordan
Registered
- Messages
- 4
i'm hearing these dayes many talks about hacking osn and AD sport from honest persons
ELECTRIK DZ
VIP
- Messages
- 1,333
(pairing system), mainly because a single and
A coupling receiver card attached with him
This means that the card does not work only with its own receiver
Even though it was the same type
So each device has a so-called BOX ID of its own
When you insert the card in the machine
The system ensures that the receiver's BOX ID
Meets Card
A well-known protocol and is programmed in
The so-called potocol T14
After confirmation of conformity
Opens the door to dialogue between the card and the receiver
In the same way that old already explained Decrypt
Asks the device from the card:
serial nember + date + provider group 00
+
provider group 10 + provider group 20 + provider group 30
+
ATR + hsn
+
So clear-cut, then
Begins receiving data
---------------------------
Device sends emm opkey the
To produce keys opkey
Which change every hour
This is done inside the card which in the ROM
After that The Working opkey goes to the RAM card
And be op key 06 +08
Active and Next
Join b keys steadfast and two
emm seed + common iv
Decoding for EMM header of each variable for a certain period
May be 20 or 30 seconds
The receiver, which sends it to the RAM card saluting no keys op key 06 +08
Are produced DCW keys that change whenever Decryption
EMM header which is the same ECM
DCW keys used to decode encryption for image and sound
Note: each emm opkey carries its own Adress
It is a special set consists of 256 cards Unit
The latter (RC) containing keys
HMK0 AXI + HMK1 EXI
It is fixed in each group have the same cards Adress
Decrypt the EMM C3/CB
And get the keys PMK0, PMK1
.................................................. ...
But it is non-currently understood both sides of the
He Tablets extract the PMK Servant
And it probably is
The help of keys
PMK0, PMK1
Of course, the PMK is the process by sending updated EMM PMK
New
The PMK is to decrypt the emm opkey for
opkey
op key 06 +08
----------------
So far the process similar to the process in normal irdeto system
Except for the potocol T14
But
When decoding for EMM header or the ECM as it is called
Not be issued ordinary keys DCW
But encrypted and called the CCW
Which in turn require decryption
It happens inside receiver tastier receives keys CCW
And decrypts the 3DES algorithm
By the so-called key p key or pairing key
To become ordinary DCW keys can decoders for picture and sound
---------------
I stopped because of the experience Cards
The number of faulty ECM sender to a large card to decode encrypted
As well as the correct header is unknown and known only in the official receiver
Even though I knew the right remains the problem of sending more than ECM at the same time
Depends card
Even if we were able to overcome these obstacles remains another problem is
That the blades CCW output must be decrypted to DCW
And we need to key pairing key is located approved receiver
A coupling receiver card attached with him
This means that the card does not work only with its own receiver
Even though it was the same type
So each device has a so-called BOX ID of its own
When you insert the card in the machine
The system ensures that the receiver's BOX ID
Meets Card
A well-known protocol and is programmed in
The so-called potocol T14
After confirmation of conformity
Opens the door to dialogue between the card and the receiver
In the same way that old already explained Decrypt
Asks the device from the card:
serial nember + date + provider group 00
+
provider group 10 + provider group 20 + provider group 30
+
ATR + hsn
+
So clear-cut, then
Begins receiving data
---------------------------
Device sends emm opkey the
To produce keys opkey
Which change every hour
This is done inside the card which in the ROM
After that The Working opkey goes to the RAM card
And be op key 06 +08
Active and Next
Join b keys steadfast and two
emm seed + common iv
Decoding for EMM header of each variable for a certain period
May be 20 or 30 seconds
The receiver, which sends it to the RAM card saluting no keys op key 06 +08
Are produced DCW keys that change whenever Decryption
EMM header which is the same ECM
DCW keys used to decode encryption for image and sound
Note: each emm opkey carries its own Adress
It is a special set consists of 256 cards Unit
The latter (RC) containing keys
HMK0 AXI + HMK1 EXI
It is fixed in each group have the same cards Adress
Decrypt the EMM C3/CB
And get the keys PMK0, PMK1
.................................................. ...
But it is non-currently understood both sides of the
He Tablets extract the PMK Servant
And it probably is
The help of keys
PMK0, PMK1
Of course, the PMK is the process by sending updated EMM PMK
New
The PMK is to decrypt the emm opkey for
opkey
op key 06 +08
----------------
So far the process similar to the process in normal irdeto system
Except for the potocol T14
But
When decoding for EMM header or the ECM as it is called
Not be issued ordinary keys DCW
But encrypted and called the CCW
Which in turn require decryption
It happens inside receiver tastier receives keys CCW
And decrypts the 3DES algorithm
By the so-called key p key or pairing key
To become ordinary DCW keys can decoders for picture and sound
---------------
I stopped because of the experience Cards
The number of faulty ECM sender to a large card to decode encrypted
As well as the correct header is unknown and known only in the official receiver
Even though I knew the right remains the problem of sending more than ECM at the same time
Depends card
Even if we were able to overcome these obstacles remains another problem is
That the blades CCW output must be decrypted to DCW
And we need to key pairing key is located approved receiver
Last edited:
ELECTRIK DZ
VIP
- Messages
- 1,333
I do not think so now
Probably CCCAM but a modified version ...How so
Been overcome obstacles facing when trying to run the card in sharing
Any protocol that is integrated open dialogue with the card in another receiver
With the integration of the receiver's BOX ID pirated
To know the correct EMM header by spying on the receiver Modify your emo copy cccam the
To work the same way as the proxy server in the pages of the site brought to you
Any
When you send ECM is decrypted and CCW extraction and sent to clein of
Save with a copy of it when you send a similar ECM at almost the same time
Does not pass to the card but the keys are sent CCW to clein
And thereby avoid the problem of the ECM
Then
Piracy has official bodies which operates Packages
OSN-AD sport
And extract key pairing key
Which in turn has been incorporated into the dongle built-in internal organs MINI X
To unzip the encryption keys for the CCW
DCW .............
----------------------------------
Key pairing key
Is fixed for each bouquet by scientific
If not for the whole system
The the ecm usual variable gives incorrect CCW
But when decrypted produce different DCW and wrong
TheHighLander
Super VIP
- Messages
- 4,144
We will wait 20 June..
ELECTRIK DZ
VIP
- Messages
- 1,333
Last edited:
TheHighLander
Super VIP
- Messages
- 4,144
nice news:thum:
TheHighLander
Super VIP
- Messages
- 4,144
Yes.there are confirms that will be on cardsharing on or before 20/6
ELECTRIK DZ
VIP
- Messages
- 1,333
TheHighLander
Super VIP
- Messages
- 4,144
Snapshots of mini x series or novatec hd 500? or cardsharing,abdoo?
ELECTRIK DZ
VIP
- Messages
- 1,333
I think the second option :mecry:
perhaps you line cccam in future
soory Mr xxxx TheHighLander
Super VIP
- Messages
- 4,144
Ok,go and have dinner,I will wait a newcamd port from u tonight..lol
ELECTRIK DZ
VIP
- Messages
- 1,333
Is prior to that date
Concerns us now run on cccam .. example :nana:
Yes Neocamd Server make a great and very wonderfull Success by Hacking (0SN,AD sports)on Nilesat with the Six (6) months period.