Oscam support Nagra rom502

D

dssnosher

Registered
Messages
58
Here is what i am getting with latest OSCAM

Code: 
2013/11/21 01:53:16 80086DB8 r mypcscreader [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/11/21 01:53:16 80086DB8 r mypcscreader [mouse] Setting baudrate to 111600 bps
2013/11/21 01:53:16 80086DB8 r mypcscreader [mouse] Calculated work ETU is 8.70 us
2013/11/21 01:53:16 80086DB8 r mypcscreader [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 3.68 MHz (specified in reader->mhz)
2013/11/21 01:53:16 80086DB8 r mypcscreader [mouse] Card responded ok for ifsd request of 251
2013/11/21 01:53:16 80086DB8 r mypcscreader [mouse] card system not supported
2013/11/21 01:53:16 80086DB8 r mypcscreader [mouse] Normal mode failed, reverting to Deprecated Mode
2013/11/21 01:53:18 80086DB8 r mypcscreader [mouse] ATR: ##ATR REMOVED##
2013/11/21 01:53:18 80086DB8 r mypcscreader [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/11/21 01:53:18 80086DB8 r mypcscreader [mouse] Calculated work ETU is 101.09 us
2013/11/21 01:53:19 80086DB8 r mypcscreader [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 3.68 MHz (specified in reader->mhz)
2013/11/21 01:53:22 80086DB8 r mypcscreader [mouse] Warning: Card returned error on setting ifsd value to 251
2013/11/21 01:53:23 80086DB8 r mypcscreader [mouse] detect native nagra card
2013/11/21 01:53:26 80086DB8 r mypcscreader [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/11/21 01:53:29 80086DB8 r mypcscreader [mouse] T1 Resync command error, trying to reactivate!
2013/11/21 01:53:31 80086DB8 r mypcscreader [mouse] ATR: ##ATR REMOVED##
2013/11/21 01:53:31 80086DB8 r mypcscreader [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/11/21 01:53:31 80086DB8 r mypcscreader [mouse] Setting baudrate to 111600 bps
2013/11/21 01:53:31 80086DB8 r mypcscreader [mouse] Calculated work ETU is 8.70 us
2013/11/21 01:53:31 80086DB8 r mypcscreader [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 3.68 MHz (specified in reader->mhz)
2013/11/21 01:53:31 80086DB8 r mypcscreader [mouse] Card responded ok for ifsd request of 251
2013/11/21 01:53:34 80086DB8 r mypcscreader [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/11/21 01:53:37 80086DB8 r mypcscreader [mouse] T1 Resync command error, trying to reactivate!
2013/11/21 01:53:39 80086DB8 r mypcscreader [mouse] ATR: ##ATR REMOVED##
2013/11/21 01:53:39 80086DB8 r mypcscreader [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/11/21 01:53:39 80086DB8 r mypcscreader [mouse] Setting baudrate to 111600 bps
2013/11/21 01:53:39 80086DB8 r mypcscreader [mouse] Calculated work ETU is 8.70 us
2013/11/21 01:53:40 80086DB8 r mypcscreader [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 3.68 MHz (specified in reader->mhz)
2013/11/21 01:53:40 80086DB8 r mypcscreader [mouse] Card responded ok for ifsd request of 251
2013/11/21 01:53:40 80086DB8 r mypcscreader [mouse] card system not supported
2013/11/21 01:53:40 80086DB8 r mypcscreader [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2013/11/21 01:53:40 80086DB8 r mypcscreader [mouse] card initializing error
2013/11/21 01:53:41 0 s init for all local cards done
2013/11/21 01:53:41 0 s anti cascading disabled
 
You must log in or register to reply here.
Top