Oscam Mod :DOScam - (by depp0ns )with emu ONLY CHAT NO FILES

  • Thread starter ooOO_SORGOS_OOoo
  • Start date
X

xXTomXx

Well Known Member
Messages
560
maybe something like this. biss and ccw are working in "normal" oscam.

oscam-emu had a emu-module within.

but wrong thread to discus that. this thread is for doscam.
 
G

gorski

Well Known Member
Messages
1,553
ET? :D

Streamboard is a friendly board that works for all sat TV boards, for all of us!!!

Moreover, I regularly post links to Sat-Universe on other forums.

This should not be adversarial, guys! We live on the fact that there are many of us, so all can't be shut down. I.e. we help each other.

Moreover, Streamboard is NOT commercial, so not a big thing, really!

I have seen many more links like that, because you have to do that, it's unrealistic to think we could live without other forums and links to them. For instance, when you want your members to get their hands on an image but the image is too large - sometimes you must put that link here!

And it is not to worry because Rock'n'roll has it worked out with the redirection script, like other good forums (Power Board, for instance, have the same thing going), so really - one should relax about that.

There is no "competition" in this case, just "co-operation"!

We all win if we get DOSCam for SH4. And we are trying to make it happen. DeppOn is now compiling it etc.

Stay tuned! :)
 
G

georgeflu

Senior Member
Messages
485
georgeflu said:
i tried it in vu ultimo and in my dm7020 (ppc).
the mipsel file is working perfect biss.
but i have problems in ppc file. can someone test it and confirm? because the same configs and soft*Cam k*ey file are working in e2?
Click to expand...

mmm i found something. biss is working in ppc too. but in doscam 0.22 you can't use biss from another receiver (add user).in the other encryptions it is ok.
 
C

coolest

Member
Messages
70
learning doscam, help me
installed doscam 0.21 ON DM800hd but can not even decrypt BISS.
Biss key is working on mgcamd.
Path of doscam config is /etc/tuxbox/config/
Here is doscam.cfg

Code: 
[global]
disablelog                    = 1
logfile                       = stdout
nice                          = -19
usrfile                       = /tmp/oscamuser.log
lb_save                       = 500
zeroconf                      = 0

[cccam]
port                          = 12000
nodeid                        = 163FB48710FB141E
version                       = 2.1.4
reshare                       = 1
updateinterval                = 60
minimizecards                 = 1

[dvbapi]
pmt_mode                      = 1
user                          = localuser
boxtype                       = dreambox

[monitor]
nocrypt                       = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255
hideclient_to                 = 15

[webif]
httpport                      = 16001
httprefresh                   = 30
httpallowed                   = 127.0.0.1,192.168.0.0-192.168.255.255
hideclient_to                 = 15

[reader]
label                         = myemulator
protocol                      = constcw
device                        = /usr/keys/SoftCam.Key
caid                          = 0100,0500,2600,0D05
group                         = 1
audisabled                    = 1
 
 
[account]
user                          = localuser
group                         = 1,2,3,64

BissKey Working on Mgcamd:
Code: 
F 00010021 00 AAAAAAAAAAAAAAAA
F 00010021 01 AAAAAAAAAAAAAAAA

mgcamd biss format
F sid+vpid 00 bisskeyaaaaaaaaa
F sid+vpid 01 bisskeyaaaaaaaaa
Click to expand...

Help....
 
Last edited:
C

coolest

Member
Messages
70
@iomeali

Working..
my format was wrong. Now I Understand.
Thanks

Another question:
i've entered cline in doscam.cfg which is converted with "CCcam-Converter_1.2"
I was using mgcamd before which used replace.list to open most channels.
Do I need replace.list in doscam as well because those channels are not working when I use cline in doscam.
 
C

coolest

Member
Messages
70
Replacing caid in mgcamd replace.list was simple
X: {{ caid } { newcaid }}
R: {{ sid } { caid } { provid } { ecmpid } { newcaid } { newprovid } { newecmpid }}
Click to expand...


how would I replace caid in doscam?
I want to replace
X: {{ 4AXX } { 0B00 }}
Click to expand...

I've entered in doscam.dvbapi
M: 4AXX:000000 0B00:000000
Click to expand...

then I got the audio only but no video.
Help
 
I

iomeali

Well Known Member
Messages
3,962
coolest said:
Replacing caid in mgcamd replace.list was simple



how would I replace caid in doscam?
I want to replace


I've entered in doscam.dvbapi


then I got the audio only but no video.
Help
Click to expand...

oscam or doscam.dvbapi are like prio
and a example is


P: 0500:043800::: 1
P: 0500:30B00
#P: 0500:032500::: 1
#P: 0500:042200::: 1
P: 0500:023800::: 1
P: 183D::: 1
#P: 0919::: 1
P: 09cd::: 1
P: 0100
P: 0D05::: 1

P: 0B00:000000
or
P: 0B00::: 1

"" the or :)"" : depending on if you want priority absolute or relative, (currently in new oscam makes little difference)
 
C

coolest

Member
Messages
70
@iomeali
still could not understand how would i replace caid in doscam?
I tried prioritizing caid after maping but still the channel is not opening!!
 
I

iomeali

Well Known Member
Messages
3,962
if you put the file doscam.dvbapi (attributes put 644) have an example written above, and you may put caid that interest you.


do not have to replace anything, but just put the caid of the card you want to open

map it isn't doscam file.

or .... I do not understand?
 
P

piratt

Registered
Messages
71
hi all,doscam v0.23 not open any channel via/cryptoworks with emu i instaling softcam in var/keys on dbox2 pbenigma vx but no joy?
 
C

Calokay

Senior Member
Messages
130
piratt said:
ok whats wrong on me i use ppcold for dbox2 with pbenigma vx maybe softcam
Click to expand...

You need to have the right set config for your receiver and image. Minimum: doscam.cfg, doscam.dvbapi, doscam.user ...
Keys can also be used in Yurik Mode (oscam ymod)format - oscam.keys, if you set it correctly in doscam.cfg:
Example
[reader]
label = Doscam V023
protocol = constcw
device = /etc/tuxbox/config/oscam.keys
caid = 0100,0100:003311,0500:043800,0500:007800;0500:007400;0500:032830;0604,1800,1801,090F,093E,0D00,0D02,0D03,0D05,2600,4A00,FF00,002600,0604,0B01
group = 1,2,3
 
Last edited:
P

piratt

Registered
Messages
71
in tuxbox/config/doscam cfg show this
[global]
logfile = stdout;/dev/null

[dvbapi]
boxtype = dbox2

maybe needed input this in doscam config?

doscam.dvbapi
doscam.srvid
doscam.services
doscam.tiers
doscam.guess
doscam.whitelist
doscam.provid
doscam.ac
 
Last edited:
You must log in or register to reply here.
Top