Oscam Mipsel (DM500HD,800,7025,8000 & VU)

[powercisco]

Oscam1.20 svn8658

- Changeset [8658] by theparasol
- More fix for radegast protocol tnx goodsat for patch
- Changeset [8657] by theparasol
- Fix for connection timeout after EMM is send over cs378x
Tnx to skyjet for patch
- Changeset [8656] by theparasol
- Revert 8655 (loadbalancer knocking failed srvids on readers once)
Add new parameter in reader setup lb_whitelist_service
tnx to Blueven for providing patch

thanks LePouSAT

 

[powercisco]

Oscam1.20 svn8667

- Changeset [8667] by bowman
Fixed debug logging that wasn't platform independent
- Changeset [8666] by bowman
Completed support for incoming udp cache updates from csp
and added experimental outgoing push (untested)
- Changeset [8665] by Eggy123
a) Fixed bug in hello logic: start counting card number at 0 again after hello packet send
b) Switch to next state only after last packet

thanks gianni8127

 

[powercisco]

Oscam1.20 svn8668

- Changeset [8668] by bowman
Skip push to csp if source is remote cacheex for now (might cause loops).
Added sending of cache pings.

thanks LePouSAT

 

[powercisco]

Oscam1.20 svn8669

- Changeset [8669] by bowman
Added the last request type used by csp clusteredcache and cleaned things up a bit.
Further discussion/testing needed proceed.

thanks LePouSAT

 

[powercisco]

Oscam1.20 svn8675

- Changeset [8675] by docman
Documentation update for 'ecmfmt': new option ONID.

- Changeset [8674] by docman
Documentation update for CSP: TCP -> UDP.

- Changeset [8673] by docman
Added new parameter 'lb_nfb_readers' to 'oscam.user', now TXT and HTML Format, too.

- Changeset [8672] by docman
Added new parameter 'lb_nfb_readers' to 'oscam.user'.

- Changeset [8671] by docman
Documentation update for gbox port definitions.

- Changeset [8670] by manio
cosmetics: fix MHz spelling Hertz is a unit from SI and need to preserve a correct case (​en.wikipedia.org/wiki/SI_derived_unit)

thanks LePouSAT

 

[powercisco]

06.06.2013 Oscam1.20 svn8684

- Changeset [8684] by docman
Updated documentation for gbox TCP -> UDP.
- Changeset [8683] by docman
Removed 'decodeforever' from documentation.
- Changeset [8682] by theparasol
- Tryfix azbox support - Fix dvbapi part on latest code analysis posted by Gorgone

thanks LePouSAT

 

[powercisco]

20.06.2013 Oscam1.20 svn8705

- Changeset [8705] by stefansat
Same rules off 6a do apply for 6c and 6d
This avoids a lot off fake or non working ecm to 6c and 6d card's

thanks LePouSAT

 

[powercisco]

Oscam1.20 svn8721

- Changeset [8721] by goodsat
Patch long ecm size ecm max + header max newcamd 12
- Changeset [8720] by lattjo
Re-arranged some variabels.
Saves a few bytes of memory for each reader if compiling without cardreaders.
-Changeset [8719] by lattjo
smargo: Implement set_parity to make sure correct parity is set after ATR is read.
- Changeset [8718] by lattjo
smargo: Some more cleanup

thanks LePouSAT

 

[powercisco]

Oscam1.20 svn8749

- Changeset [8749] by bowman
Finalized ghttp autoconf.
-Changeset [8748] by theparasol
Dump work in progress on dvbapi modules
Fixed chid prio without force
Restored channelcache chid I removed before
Channelcache chid now overrules oscam.dvbapi prio chid
Pids without status / prio start in second descramble run, not in first
Tryfix stapi starting up streamfilters in standby
- Changeset [8747] by bowman
Work in progress: Added an autoconfig page for ghttp to the webif.

thanks LePouSAT

 

[powercisco]

19.07.2013 Oscam1.20 svn8758

- Changeset [8758] by stefansat
added nagra chid info
this info is correct for all nagra/seca based cards when using the nagra pid
- Changeset [8757] by lattjo
Cryptoworks: Fixed spelling error in log
- Changeset [8756] by docman
Update documentation for penalty: disable to ban.

thanks LePouSAT

 

[powercisco]

24.07.2013 Oscam1.20 svn8767

- Changeset [8767] by stefansat
changed lb into the loadbalancer

thanks LePouSAT

 

[powercisco]

05.08.2013 Oscam1.20 svn8816

- Changeset [8816] by gorgone.impertinence
fix footer link
- Changeset [8815] by gorgone.impertinence
fix rederstats menu
- Changeset [8814] by gorgone.impertinence
restore modern webif first release no optimisations !!!
- Changeset [8813] by gorgone.impertinence
firs clean

thanks LePouSA

 

[macro]

oscam-svn8999

 

[powercisco]

23.01.2014 Oscam1.20 svn9437

- Changeset [9437] by gorgone.impertinence
allow override for picons in user & status

- Changeset [9436] by gorgone.impertinence
replace more drop-down with check-box
- Changeset [9435] by gorgone.impertinence
change addservice to top input (like every other add new) resize & rename …
- Changeset [9434] by gorgone.impertinence
disable important if size is 0 size 0 is default

thanks LePouSAT

 

[ducomico]

Latest_version_oscam_1.20-rev-9453-oe1.6.-oe2.0.-Pli-4.0.rar

http://rg.to/file/d3cc7047fd1c795c732cb8be2b45d8b0/Latest_version_oscam_1.20-rev-9453-oe1.6.-oe2.0.-Pli-4.0.rar.rar.html

 

[ducomico]

Latest_version_oscam_1.20-rev-9460-oe1.6.-oe2.0.-Pli-4.0.rar

Latest_version_oscam_1.20-rev-9460-oe1.6.-oe2.0.-Pli-4.0.rar
==============================================================

http://rg.to/file/7c8bfac462dece7e9d7e151d40474fe1/Latest_version_oscam_1.20-rev-9460-oe1.6.-oe2.0.-Pli-4.0.rar.rar.html

 

[ducomico]

oscam_1.20-rev-9462-oe1.6.-2.0-4.0Pli

http://rg.to/file/c41c204f8bf4bd41c3a265488d8cc2e7/oscam_1.20-rev-9462-oe1.6.-2.0-4.0Pli.rar.html

 

[ducomico]

oscam_1.20-rev-9474-oe1.6.-2.0_-Pli_4.0

http://rg.to/file/e9a0dc953ad8072f1cacec10f4f14023/oscam_1.20-rev-9474-oe1.6.-2.0_-Pli_4.0.rar.html

 

[ducomico]

Latest oscam 1.20-rev-9476-oe1.6.-2.0-Pli_4.0

http://rg.to/file/1c6bcfc440a7fa1d6799aa153f002f98/Latest_oscam_1.20-rev-9476-oe1.6.-2.0-Pli_4.0.ra:nana:r.html

 

[meier2k]

Hello Ducomico,

I would like to ask a favour, it would be great if you could compile an oscam for pli mipsoe2.0 image including usb lib driver with support for IPv6. I tried to find a compiled version on the net but no success in open downloads! - Since the first ISPs in Germany are switching to IPv6 it would be great to start some investigations on IPv6 networks and Oscam. My et9x00 is already running on dual stack.

Thanks for your support,

regards,

meier2k