Oscam/Mgcamd entitlement update (Caid 090F N*D*S Viasat VideoGuard)

S

Superglud

Member
Messages
50
Hi zeros

Thanks for replying

zeros said:
In my opinion oscam.server put
audisabled = 1
, you have
# audisabled = 1

It means
0 = disable AU (default)
1 = enable AU
2 = enable AU, override AU settings of client, set answering reader as AU reader

So at the moment you are not allowed by default AU (bars on the front).
Click to expand...

zeros said:
Herein:
Click to expand...

Yes, but this is values for AU in the [dvbapi] section
and [dvbapi] is only for OScam as client.

I am not using oscam as client, and have no [dvbapi] section in oscam.conf

Best regards
 
B

beson

Registered
Messages
12
Ok superglud, try this config now

oscam.conf
Code: 
[global]
logfile = /var/log/oscam.log
maxlogsize = 1000
nice = -1
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1

[newcamd]
key = 0102030405060708091011121314
port = 34001@090F:000000

[webif]
httpport                      = 8080
httpuser                      = 
httppwd                       = 
httprefresh                   = 5
httpallowed                   = 127.0.0.1,192.168.1.1-192.168.1.255

Notice, no login on webif.


oscam.server
Code: 
[reader]
label = VIASAT
protocol = internal
device = /dev/sci0
detect = cd
caid = 090F
cardmhz = 357
mhz = 357
au = 1
group = 1
emmcache = 1,3,2

oscam.user
Code: 
[account]
user = remote_inhouse_user1
pwd = xxxxxxxxx
group = 1
au = 1
caid = 090F
ident = 090F:000000

[account]
user = localuser
pwd = xxxxxxxxx
group = 1
au = 1
caid = 090F
ident = 090F:000000

newcamd.list
Code: 
CWS_KEEPALIVE = 300
CWS = 127.0.0.1 34001 localuser xxxxxxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14

beson
 
S

Superglud

Member
Messages
50
Hi beson

thanks for replying

sorry for my late reply (I am busy at the moment)

I tried your config proposal. (with minor modifications)
It is working

I will get back with a full report, when i have better time

you're the man, thanks

Best regards
 
S

Superglud

Member
Messages
50
Caid 090F N*D*S Viasat VideoGuard (Viasat Nordic)

Oscam/mgcamd is now finally updating the entitlements (Org. viasat card caid 090F)

Thanks for the help everyone, beson you're the man

Adding au = 1 in oscam.server [reader] section, did the trick.
au = 1 (Undocumented feature)


Vu+ Ultimo
(Black Hole Vu+ Ultimo 1.7.8)
(Oscam server (Oscam1.20 svn7895))
(mgcamd client (mgcamd1.38))
mgcamd client running the "localuser"
Card is in internal reader in VU+ Ultimo

QBoxHD
(Roy Image BKP QBOXHD 7.4.2012)
(mgcamd client (mgcamd1.38a))
mgcamd client running the "remote_inhouse_user1"


OScam/mgcamd setup (on the Vu+ Ultimo):

oscam.conf (BEGIN)***********************
[global]
nice = -1
logfile = /var/log/oscam.log
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 1000
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

#-------------
# web interface

[webif]
#httpallowed = 127.0.0.1,192.168.0.2-192.168.0.100,192.168.1.2-192.168.1.100 # Or SET your House Lan
httpallowed = 127.0.0.1,10.0.2-10.0.0.100 # Or SET your House Lan
httpport = 8080
httpuser = xxxxxxxxx
httppwd = xxxxxxxxx
#httpscript =
httprefresh = 5
httphideidleclients = 0
#debug = 255

[newcamd]
key = 0102030405060708091011121314
port = 34001@090F:000000
allowed =
keepalive = 1
mgclient = 1
oscam.conf (END)*************************

oscam.user (BEGIN)***********************
[account]
user = remote_inhouse_user1
pwd = xxxxxxxxx
group = 1
au = VIASAT
caid = 090F
ident = 090F:000000

[account]
user = localuser
pwd = xxxxxxxxx
group = 1
au = VIASAT
caid = 090F
ident = 090F:000000
oscam.user (END)*************************

oscam.server (BEGIN)***********************
[reader]
label = VIASAT
protocol = internal
device = /dev/sci0
detect = cd
caid = 090F
cardmhz = 357
mhz = 357
au = 1
group = 1
#audisabled = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
oscam.server (END)*************************

oscam.dvbapi (BEGIN)***********************
P: 090F:000000 #VIASAT 4.8E NDS2
I: 0
oscam.dvbapi (END)*************************

cccamd.list (BEGIN)***********************
C: 127.0.0.1 12000 localuser xxxxxxxxx yes
C: 127.0.0.1 12000 remote_inhouse_user1 xxxxxxxxx yes
cccamd.list (END)*************************

newcamd.list (BEGIN)***********************
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 127.0.0.1 34001 localuser xxxxxxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
newcamd.list (END)*************************

mg_cfg (BEGIN)**************************************************# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 02 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 15 }

# newcamd dead routes connect retry, sec
Q: { 10 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
#L: { 02 } 172.16.1.1 28007 /tmp/mgcamd.log
#L: { 04 } 127.0.0.1 28007 /tmp/mgcamd.log
L: { 00 } 127.0.0.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
#B: { 00 }
B: { 06 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
mg_cfg (END)****************************************************

Best regards
 
You must log in or register to reply here.
Top