sir how to install this file in my dm800se because it not bin file
sir how to install this file in my dm800se because it not bin file
Yes it is,you need to decompress.
You can simply use 7zip,then move the bin file to /usr/bin
In another note,I was successful making autoroll work.
I can confirm is working (not the others confirmation do not count,is just me finding out the right settings for it)
I could not make second audio in certain channels to work,but the ones it works,I suspect audio is not encrypted.
Anybody have success decrypting second audio?
I did notice CW in use is the same for first and second audio,so is not a problem with CW,is probably the device setup at open() data
plz anybody help me same problem still arises
Ok,let me try to help you
Do this
Once you change the channel,and stop working
type in telnet
ps
This to see if the emu crashed
If oscam is present in the list,it didn;t crash and the problem is somewhere else.
If didn't crash do this
open webif for oscam (you type the dreamboxiposcam port)
Go to live logs,while logging you change channels,make sure you can copy and save the part before and during channel change,for us to see.
The log will give a better idea of what's going on.
nicovil
looks like azbox should work only on streaming,as the access to the DES decrypt hardware in azbox is not implemented yet,my assumption,of course.
Dreambox and azbox uses a different chipset,their only similarity is both are SOC.
Ok,let me try to help you
Do this
Once you change the channel,and stop working
type in telnet
ps
This to see if the emu crashed
If oscam is present in the list,it didn;t crash and the problem is somewhere else.
If didn't crash do this
open webif for oscam (you type the dreamboxiposcam port)
Go to live logs,while logging you change channels,make sure you can copy and save the part before and during channel change,for us to see.
The log will give a better idea of what's going on.
nicovil
looks like azbox should work only on streaming,as the access to the DES decrypt hardware in azbox is not implemented yet,my assumption,of course.
Dreambox and azbox uses a different chipset,their only similarity is both are SOC.
Thanks a lot joeuser, it's working fine on my Dreambox DM800HD PVR Clone with OpenPli 4.0 and oscam-emu patched v11086.
Now I can watch powervu channels along with other encrypted channels through same emu (by using cccam reader in oscam server file for other channels).
Yes by using cccam reader in oscam.server file you can watch cccam channels with oscam-emu.its possible to use cccam+oscam at the same time?
Yes by using cccam reader in oscam.server file you can watch cccam channels with oscam-emu.
Azbx will never die the support opensource the drivers and powervu+ au