Oscam-emu now supports powervu without streamrelay (on dreambox only...)

[matt33]

to nie je problem oscamu, ale drivers v tom ktorom image.. kludne to posuvaj, nabuduce az bude nieco nove dostanete trt palov

This is not problem in oscam, this is problem in drivers .. in openatv and openpli ac3 sound work, all others images is only copy paste

Ak by som používal ATV tak to napíšem a nerobím s tým tajnosti ja ATV nepoužívam a kvôli powervu naň prechádzať ani nebudem vyskúšal som to a tým to skončilo sám dobre vieš že keď to prepneš do OE 2.2 nič iné nejde.

If I used the ATV so I write it down and do with that secret I used and ATV PowerVu because it will not pass or I tried it and thus it ended up alone well know that when it switches to OE 2.2 is not anything else.

 

[matt33]

Thanks!
How can we make it to work in DM800 se V2 OE2.0?
Switching to DVB api? You have been using stream relay until now?

I think it is only DM7080 and DM820 but you can try.

 

[backspeed]

Working great with DM 7080 on open ATV image through oscam v11076 even all soundtracks work on every pvu channel.

 

[cristo4]

I think it works only with OE2.2 boxes, 7080 and 820. With OE2.0 still it's not working all AC3 sound tracks.

 

[mux1]

This sounds like great news but how hard is it for someone just getting in to powervu to get EMM keys now? The way I understand it is the only way for auto roll to work is if you have EMM keys.

The reason I ask is because until recently I thought Boss had the only game in town. He does keep promising a working EPG which in my opinion if it works would be a great thing.

At this time I have not bought a receiver yet but I am leaning towards a Dreambox more than likely it will be one that I could add Boss' card.

I am just trying to weigh my options. Plus after whatever MTN TV did is more than likely going to go to all PV.

 

[dandansoy]

will these work on dm500s?

 

[vladan !!]

after long time read i make work oscam powervu dm500HD clone ferrari sim with Ferrari-SSL87F-OpenPLi 2.1-dm500hd-20130909 (i dont have try another imag)
oscam v11076
i try the last oscam 11209 everithing going good (jast change this oscam with the old on usr/bin) but dont open powervu channels ,looks dont read the softcam.key.
any idea meybe can work or to let it and to keep the old oscam whitch is working?
thanks
good job !!

 

[vladan !!]

and one sceen shot with oscam r11209

 

[joeuser]

If you are using my latest, the format of the sofcam.key file for powervu keys has changed to enable each UA key to auto update multiple channels.
Look here for info:
http://www.sat-universe.com/showpost.php?p=2036642755&postcount=52

 

[vladan !!]

If you are using my latest, the format of the sofcam.key file for powervu keys has changed to enable each UA key to auto update multiple channels.
Look here for info:
http://www.sat-universe.com/showpost.php?p=2036642755&postcount=52

thanks for the replay m8!!
i think that is the problam and i try to find how to fix it , i dont have see any softcam for the new oscam

 

[vladan !!]

i dont have change the oscam.conf
is this one

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11075
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt

[global]
logfile = /var/log/oscam.log
#logfile = stdout
nice = -1
preferlocalcards = 1

[cache]

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = linuxsatsupport
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox

[webif]
httpport = 16402
httptpl = /etc/tuxbox/config/tpl/
httprefresh = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
http_status_log = 1

and on softcam
is this one

P 3840 00 57xxxxxxxxxxxx51 ;Discovery Channel Ukraine, 4.8E, 12226
P 3840 01 F8xxxxxxxxxxxx95 ;Discovery Channel Ukraine, 4.8E, 12226

 

[vladan !!]

If you are using my latest, the format of the sofcam.key file for powervu keys has changed to enable each UA key to auto update multiple channels.
Look here for info:
http://www.sat-universe.com/showpost.php?p=2036642755&postcount=52

ok m8!!
i read many post of you here and on another forum and try to work with your oscam here
http://www.sat-universe.com/showthread.php?p=2036642755#post2036642755
the oscam start to work
but not all the power vu channels whitch i see with the old version
same discovery on 4.9E are working
sis no

2016/01/30 02:46:22 11xxx78 c (ecm) linuxsatsupport (0E00@000000/0000/0014/40:7CF3493C4298046E39B251D2D917DE67): rejected reader sid (5 ms) by SoftCam.Key (F/5/5/5) - CORAL TV1 - PVU4
2016/01/30 02:46:22 11xxx78 c (dvbapi) Demuxer 0 restarting decodingrequests after 4 ms with 1 enabled and 0 disabled ecmpids!
2016/01/30 02:46:22 11xxx78 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1784 ANY CHID PMTPID 139C VPID 019A

how can i find the files like oscam.conf for this version?

 

[antrabe]

Anyone knows which is the diference why on Vu doesnt works

 

[ca1ne]

only reason I can see. the whole thing is a publicity stunt to sell dreambox. Why else should we have to enter the channel sid in all keys etc, they manage it well without in the dreambox: D

 

[joeuser]

ok m8!!
i read many post of you here and on another forum and try to work with your oscam here
http://www.sat-universe.com/showthread.php?p=2036642755#post2036642755
the oscam start to work
but not all the power vu channels whitch i see with the old version
same discovery on 4.9E are working
sis no

how can i find the files like oscam.conf for this version?

There us no difference in oscam.conf.
Check your keys for sis as they change often...
Also make sure all sis keys are in a the same unique group.

 

[joeuser]

and on softcam
is this one

You did not add a groupid prefix to your keys.

P [COLOR="Red"]nnnn[/COLOR]3840 00 57xxxxxxxxxxxx51 ;Discovery Channel Ukraine, 4.8E, 12226
P [COLOR="red"]nnnn[/COLOR]3840 01 F8xxxxxxxxxxxx95 ;Discovery Channel Ukraine, 4.8E, 12226
Today 01:19

 

[joeuser]

only reason I can see. the whole thing is a publicity stunt to sell dreambox. Why else should we have to enter the channel sid in all keys etc, they manage it well without in the dreambox: D

Very funny. No conspiracy, just a matter of drivers and having hardware descramblers which support DES, not all boxes do. The key file needed for dreambox is exactly the same, not sure what you are talking about.

 

[dahaka]

just a matter of drivers and having hardware descramblers which support DES, not all boxes do.

Why mcas can open pvu channels at sh_4 receivers but oscam can't ? (its not matter of driver in this case right) ?

 

[joeuser]

Why mcas can open pvu channels at sh_4 receivers but oscam can't ? (its not matter of driver in this case right) ?

Yes. I am working on it, just don't have much free time these days...

 

[ca1ne]

erm, Data Encryption Standard not supported?