oscam and upc bdc file

[red]

hi guys

l have blue dragon card and its updated with upc file

l have tryed oscam+cccam on gemini image and on nabillo darkstar 2 but still no picture dose anyone have a working oscam config please :mecry:

by the way my reciver is dreambox 500s clone

 

[red]

any help is appriciated guys

 

[guli]

what is the caid & ident of the package mate .

 

[Amnesix1]

what is the caid & ident of the package mate .

You have posted config files two months ago. -> here

Works perfect! ;-)

 

[guli]

thank you my friend i totally forgot about it . actually no one replied to say that it works perfect .

i am glad that you reminded me . it's always nice if people reply , then you know it's worth while .

 

[red]

You have posted config files two months ago. -> here

Works perfect! ;-)

l have tested that config of guli on gemini image and nabillo darkster 2
l have dreambox 500s clone but still no picture l know my card is working good because when l put in my astrosat reciver it works well

l am getting this error in my oscam log

2011/10/10 14:40:33 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=11
2011/10/10 14:40:33 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=11
2011/10/10 14:40:33 32025B50 c dummy (0D02&0000A0/75FC/84:96C4): not found (1 ms) by upc (of 1 avail 1)

 

[red]

You have posted config files two months ago. -> here

Works perfect! ;-)

can you tell me which image you are using mate:thum:

 

[guli]

can you show the full oscam log mate .

 

[red]

l will restart and send log ok:thum:

 

[red]

1970/01/01 0:00:24 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=11
1970/01/01 0:00:24 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=11
1970/01/01 0:00:24 31825B50 r found cardsystem cryptoworks
1970/01/01 0:00:24 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=11
1970/01/01 0:00:24 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=11
1970/01/01 0:00:24 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=11
1970/01/01 0:00:24 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=11
1970/01/01 0:00:24 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=11
1970/01/01 0:00:24 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=11
1970/01/01 0:00:24 31825B50 r provider: 1, id: 8C
1970/01/01 0:00:24 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=11
1970/01/01 0:00:24 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=11
1970/01/01 0:00:24 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=11
1970/01/01 0:00:24 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=11
1970/01/01 0:00:24 300162B0 s init for all local cards done
1970/01/01 0:00:24 300162B0 s anti cascading disabled
2011/10/10 15:00:10 32025B50 c client connected to 14000 port
2011/10/10 15:00:11 32025B50 c encrypted newcamd:14000-client 127.0.0.1 granted (dummy, au=on (1 reader))
2011/10/10 15:00:11 32025B50 c user dummy authenticated successfully (CCcam)
2011/10/10 15:00:11 32025B50 c AU disabled for user dummy
2011/10/10 15:00:11 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=11
2011/10/10 15:00:11 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=11
2011/10/10 15:00:11 32025B50 c dummy (0D02&0000A0/75FC/84ED1): not found (1 ms) by upc (of 1 avail 1)
2011/10/10 15:00:17 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=11
2011/10/10 15:00:17 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=11
2011/10/10 15:00:17 32025B50 c dummy (0D02&0000A0/75FC/84:C1F3): not found (1 ms) by upc (of 1 avail 1)
2011/10/10 15:00:20 31025B50 h all debug_level=0

 

[guli]

actually there is very little info here . too many errors , have you tried with a later version of oscam .

ask amnesix1 as to what hardware/softcams versions he uses .

 

[red]

l will try mate l have used about 4 oscam versions but l will keep trying

thanks guli:thum:

 

[tsitsi58]

same problem here. look my configs please in dm800 dream elite phoenix image oscam version= 2901 cccam 213
oscam config

[global]
logfile = /tmp/oscam.log
cachedelay = 120
nice = -1
maxlogsize = 500

[monitor]
port = 988
nocrypt =
aulow = 120
hideclient_to = 15
monlevel = 4
appendchaninfo = 0

[newcamd]
port = 14000@0D02:0000A0
key = 0102030405060708091011121314
keepalive = 1

[webif]
httpport = 50005
httpuser = ....
httppwd = .....
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

oscam server

[reader]
label = upc
enable = 1
protocol = internal
device = /dev/sci0
pincode = 0000
services =
fix9993 = 0
detect = cd
mhz = 375
cardmhz = 375
caid = 0D02
ident = 0D02:00008C,0000A0,0000A4,0000A8
group = 1
emmcache = 1,3,2
lb_weight = 100

oscam user

[account]
user = ......
pwd = .....
group = 1
AU = UPC
caid = 0d02
ident = 0D02:00008C,0000A0,0000A4,0000A8

i get this in oscam log


2011/10/24 10:44:48 27632 s shared memory initialized (size=543164, fd=5)
2011/10/24 10:44:48 27632 s auth size=4752
2011/10/24 10:44:48 27632 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
2011/10/24 10:44:48 27632 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2011/10/24 10:44:48 27632 s signal handling initialized (type=sysv)
2011/10/24 10:44:48 27632 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2011/10/24 10:44:48 27632 s monitor: initialized (fd=9, port=988)
2011/10/24 10:44:48 27632 s camd 3.3x: disabled
2011/10/24 10:44:48 27632 s camd 3.5x: disabled
2011/10/24 10:44:48 27632 s cs378x: disabled
2011/10/24 10:44:48 27632 s newcamd: initialized (fd=10, port=14000, crypted)
2011/10/24 10:44:48 27632 s CAID: 0D02
2011/10/24 10:44:48 27632 s provid #0: 0000A0
2011/10/24 10:44:48 27632 s cccam: disabled
2011/10/24 10:44:48 27632 s radegast: disabled
2011/10/24 10:44:48 27632 s logger started (pid=27634)
2011/10/24 10:44:48 27632 s resolver started (pid=27635, delay=30 sec)
2011/10/24 10:44:48 27632 s http started (pid=27636)
2011/10/24 10:44:48 27632 s reader started (pid=27637, device=/dev/sci0)
2011/10/24 10:44:48 27632 s waiting for local card init
2011/10/24 10:44:48 27632 s init for all local cards done
2011/10/24 10:44:48 27632 s anti cascading disabled
2011/10/24 10:44:48 27632 s dvbapi disabled
2011/10/24 10:44:48 27636 h HTTP Server listening on port 50005
2011/10/24 10:44:48 27637 r03 card detected
2011/10/24 10:44:49 27637 r03 ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2011/10/24 10:44:50 27637 r03 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.75 Mhz
2011/10/24 10:44:54 27637 r03 type: CryptoWorks, caid: 0D00, ascii serial: 0, hex serial: 0000000000
2011/10/24 10:45:03 27637 r03 issuer: unknown, id: 00, bios: v3, pin: unknown, mfid: 3F02
2011/10/24 10:45:03 27637 r03 providers: 4 (8C,A0,A4,A8)
2011/10/24 10:45:03 27637 r03 [cryptoworks-reader] ready for requests
2011/10/24 10:45:05 27637 r03 [cryptoworks-reader] card detected
2011/10/24 10:45:05 27637 r03 [cryptoworks-reader] type: CryptoWorks
2011/10/24 10:45:08 27632 s client(1) connect from 127.0.0.1 (pid=27692, pipfd=16)
2011/10/24 10:45:08 27692 c01 encrypted newcamd:14000-client 127.0.0.1 granted (tsitsi, au=upc)
2011/10/24 10:45:08 27692 c01 user .... authenticated successfully (using client 4343)
2011/10/24 10:45:09 27637 r03 provider: 1, id: 8C
2011/10/24 10:45:45 27692 c01 ...... (0D02&0000A0/1F48/87:A951): rejected user ident (239 ms)
2011/10/24 10:45:52 27692 c01 tsitsi (0D02&0000A0/1D5E/87:E5F4): rejected user ident (121 ms)
2011/10/24 10:45:55 27692 c01 tsitsi (0D02&0000A0/1F48/87:0309): rejected user ident (121 ms)

i can.t get my dm 800 read the card i think so i cant watch the channels do you have any idea why is that?

 

[tsitsi58]

come on guys a little help here i cant make my dragoncard play upc.please help

 

[bellof]

try first with killing ident in user and reader!!

like that first

# ident = 0D02:00008C,0000A0,0000A4,0000A8

 

[tsitsi58]

when i put that config # ident = 0D02:00008C,0000A0,0000A4,0000A8 i get this log
2011/10/31 11:50:48 17339 c01 tsitsi (0D02&00008C/77FB/84:601D): not found (1478 ms)
and when i put this config
ident = 0D02:00008C,0000A0,0000A4,0000A8
i get this log
/10/31 11:55:21 17880 c01 tsitsi (0D02&00008C/08FE/BF:4453): rejected user ident (121 ms) why is that?

 

[joseph_lowe]

Hello , you can try in this way

[global]
logfile = /tmp/oscam.log
cachedelay = 120
nice = -1
maxlogsize = 500

[monitor]
port = 988
nocrypt =
aulow = 120
hideclient_to = 15
monlevel = 4
appendchaninfo = 0

[newcamd]
port = 14000@0D02:000000,00008C,0000A0,0000A4,0000A8
key = 0102030405060708091011121314
keepalive = 1

[webif]
httpport = 50005
httpuser = ....
httppwd = .....
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

[reader]
label = upc
enable = 1
protocol = internal
device = /dev/sci0
pincode = 0000
services =
fix9993 = 0
detect = cd
mhz = 400
cardmhz = 357
caid = 0D02
ident = 0D02:000000,00008C,0000A0,0000A4,0000A8
group = 1
emmcache = 1,3,2
lb_weight = 100

[account]
user = ......
pwd = .....
group = 1
AU = UPC
caid = 0d02
ident = 0D02:000000,00008C,0000A0,0000A4,0000A8


it should works

 

[tsitsi58]

i get also that strange thing
2011/10/31 12:14:31 20436 r03 type: CryptoWorks, caid: 0D00, ascii serial: 0, hex serial: 0000000000

0D00 why????

 

[tsitsi58]

same thing
2011/10/31 12:19:37 21094 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
2011/10/31 12:19:37 21094 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2011/10/31 12:19:37 21094 s signal handling initialized (type=sysv)
2011/10/31 12:19:37 21094 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2011/10/31 12:19:37 21094 s monitor: initialized (fd=9, port=988)
2011/10/31 12:19:37 21094 s camd 3.3x: disabled
2011/10/31 12:19:37 21094 s camd 3.5x: disabled
2011/10/31 12:19:37 21094 s cs378x: disabled
2011/10/31 12:19:37 21094 s newcamd: initialized (fd=10, port=14000, crypted)
2011/10/31 12:19:37 21094 s CAID: 0D02
2011/10/31 12:19:37 21094 s provid #0: 000000
2011/10/31 12:19:37 21094 s provid #1: 00008C
2011/10/31 12:19:37 21094 s provid #2: 0000A0
2011/10/31 12:19:37 21094 s provid #3: 0000A4
2011/10/31 12:19:37 21094 s provid #4: 0000A8
2011/10/31 12:19:37 21094 s cccam: disabled
2011/10/31 12:19:37 21094 s radegast: disabled
2011/10/31 12:19:37 21094 s logger started (pid=21096)
2011/10/31 12:19:37 21094 s resolver started (pid=21097, delay=30 sec)
2011/10/31 12:19:37 21094 s http started (pid=21098)
2011/10/31 12:19:37 21094 s reader started (pid=21099, device=/dev/sci0)
2011/10/31 12:19:37 21094 s waiting for local card init
2011/10/31 12:19:37 21094 s init for all local cards done
2011/10/31 12:19:37 21094 s anti cascading disabled
2011/10/31 12:19:37 21094 s dvbapi disabled
2011/10/31 12:19:37 21098 h HTTP Server listening on port 50005
2011/10/31 12:19:37 21099 r03 card detected
2011/10/31 12:19:37 21094 s provid #2: 0000A0
2011/10/31 12:19:37 21094 s provid #3: 0000A4
2011/10/31 12:19:37 21094 s provid #4: 0000A8
2011/10/31 12:19:37 21094 s cccam: disabled
2011/10/31 12:19:37 21094 s radegast: disabled
2011/10/31 12:19:37 21094 s logger started (pid=21096)
2011/10/31 12:19:37 21094 s resolver started (pid=21097, delay=30 sec)
2011/10/31 12:19:37 21094 s http started (pid=21098)
2011/10/31 12:19:37 21094 s reader started (pid=21099, device=/dev/sci0)
2011/10/31 12:19:37 21094 s waiting for local card init
2011/10/31 12:19:37 21094 s init for all local cards done
2011/10/31 12:19:37 21094 s anti cascading disabled
2011/10/31 12:19:37 21094 s dvbapi disabled
2011/10/31 12:19:37 21098 h HTTP Server listening on port 50005
2011/10/31 12:19:37 21099 r03 card detected
2011/10/31 12:19:39 21099 r03 ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2011/10/31 12:19:40 21099 r03 Maximum frequency for this card is formally 5 Mhz, clocking it to 4.00 Mhz
2011/10/31 12:19:44 21099 r03 type: CryptoWorks, caid: 0D00, ascii serial: 0, hex serial: 0000000000
2011/10/31 12:19:52 21099 r03 issuer: unknown, id: 00, bios: v3, pin: unknown, mfid: 3F02
2011/10/31 12:19:52 21099 r03 providers: 4 (8C,A0,A4,A8)
2011/10/31 12:19:52 21099 r03 [cryptoworks-reader] ready for requests
2011/10/31 12:19:54 21099 r03 [cryptoworks-reader] card detected
2011/10/31 12:19:54 21099 r03 [cryptoworks-reader] type: CryptoWorks
2011/10/31 12:19:57 21094 s client(1) connect from 127.0.0.1 (pid=21154, pipfd=16)
2011/10/31 12:19:57 21154 c01 encrypted newcamd:14000-client 127.0.0.1 granted (tsitsi, au=upc)
2011/10/31 12:19:57 21154 c01 user tsitsi authenticated successfully (using client 4343)
2011/10/31 12:19:58 21099 r03 provider: 1, id: 8C
2011/10/31 12:21:48 21154 c01 tsitsi (0D02&000000/0002/B4:6685): rejected user ident (121 ms)



and look at this too in cccam web info says server
27.0.0.1:14000 |00d 00:06:37|newcamd | | | 1 |remote 0d00:000000 6(0)

 

[mangolini]

try external reader