Ok I did a test again now and it works. (or better it seems to work, because tiers of this card are down)
root@dm8000:~# 09:10:30 0 s **** OSCam << cardserver started, version 1.20-unstable_svn, build r9065 (mipsel-unknown-linux-gnu)
09:10:30 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 11816
09:10:30 0 s services reloaded: 0 services freed, 6 services loaded, rejected 0
09:10:30 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
09:10:30 0 s signal handling initialized
09:10:30 0 s 1821 service-id's loaded in 33ms
09:10:30 0 s 70 tier-id's loaded
09:10:30 0 s 966 provid's loaded
09:10:31 0 s 8280 entries read from oscam.whitelist
09:10:31 0 s monitor: initialized (fd=4, port=500)
09:10:31 0 s conto-tv [internal] creating thread for device /dev/sci0
09:10:31 0 s loadbalancer: can't read from file /tmp/.oscam/stat
09:10:31 0 s waiting for local card init
09:10:31 5C10E8 r conto-tv [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted cardmhz=-0.01 MHz
09:10:32 5C10E8 r conto-tv [internal] card detected
09:10:33 5C10E8 r conto-tv [internal] ATR: 3B 24 00 30 42 30 30
09:10:33 5C10E8 r conto-tv [internal] Init card protocol T0, FI=1, F=372, D=1, N=0
09:10:33 5C10E8 r conto-tv [internal] Calculated work ETU is 82.67 us reader mhz = 2700
09:10:33 5C10E8 r conto-tv [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
09:10:34 5C10E8 r conto-tv [internal] type: Conax, caid: 0B01, serial: ##########, hex serial: ########, card: v64
09:10:34 5C10E8 r conto-tv [internal] Providers: 1
09:10:34 5C10E8 r conto-tv [internal] Provider: 1 Provider-Id: 000000
09:10:34 5C10E8 r conto-tv [internal] Provider: 1 SharedAddress: ########
09:10:34 5C10E8 r conto-tv [internal] found card system conax
09:10:34 5C10E8 r conto-tv [conax] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
09:10:34 5C10E8 r conto-tv [conax] Package: 1, id: 1010, classes: 0100FFFE, date: 2013/02/01 - 2013/02/28, name: Conto-TV
09:10:34 5C10E8 r conto-tv [conax] Package: 2, id: 1010, classes: 01000000, date: 2013/01/01 - 2013/01/31, name: Conto-TV
09:10:34 5C10E8 r conto-tv [conax] ready for requests
09:10:35 0 s init for all local cards done
09:10:35 0 s anti cascading disabled
09:10:35 5CA278 c plain dvbapi-client granted (my8000, au=auto (1 reader))
09:10:35 5CA278 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
My card is a 0B02 and I have oscam9065 compiled by myself
my test config here adapted to your card is:
[reader]
label = CanalDigitalKort
protocol = internal
detect = cd
device = /dev/sci0
caid = 0B00
ident = 0B00:000000
mhz = 2700
cardmhz = -1
group = 1
emmcache = 1,3,2
I hope this may help...