original card not work!

[roni261980]

I am trying to set up the card readers, but am having no luck,i have a conax card dig##alb but not work with mgcamd and evocamd.help

 

[Sotiris70]

try this:

If you have problem at your Ipbox 9000 HD to read cards with slots, put these files i have uploaded at the same directorys and replace the old ones with the new files. Make a restart of the box and you will be ok with mgcamd and sif image.
A viaccess card i have, worked fine at down slot with Mgcamd.
Also Gam@ cards work fine.


http://rapidshare.com/files/124687979/Mgcamd.rar

many thanks to stratis71

 

[bigfoot007]

@ XT660X

Do you know why this is happening?

-sh-3.00# This is NewCS 1.60 - the New CardServer by the Butter-team..
Compiled on May 19 2008 at 21:02:30
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
TCP-log set to simple mode
level: verbose
type: init
output: all
logger config: level 2 type 3 output 255
Console log options: level 2 type 3
log file:
logger: cant open file , file log disabled
udp log: host 192.168.1.10 port 1000
UDP log options: level 2 type 3
TCP log options: level 2 type 3
[ 22:15:44 ] [ Box detect ] Box type 1 (General Boxtype - PC compatible)
[ 22:15:44 ] [ Config ] Option for device 0 (lower) not present, defaulting to NO
[ 22:15:44 ] [ Config ] /dev/sci0 ECM priority: round
[ 22:15:44 ] [ Config ] Option for device 1 (upper) not present, defaulting to NO
[ 22:15:44 ] [ Config ] /dev/sci1 ECM priority: round
[ 22:15:44 ] [ Config ] Option not present for User: local, defaulting to NO
[ 22:15:44 ] [ Config ] Option not present for User: local, defaulting to NO
[ 22:15:44 ] [ EMM Cache ] Initialising dynamic Cache
[ 22:15:44 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 3039
[ 22:15:44 ] Calibrating delay loops
[ 22:15:44 ] usleep(5) takes: 0 s 17 us
[ 22:15:44 ] usleep(10) takes: 0 s 21 us
[ 22:15:44 ] usleep(100) takes: 0 s 112 us
[ 22:15:44 ] usleep(500) takes: 0 s 509 us
[ 22:15:44 ] Allocation memory for 200 regular users
[ 22:15:44 ] [ Loader ] Starting Telnet on port 1001
[ 22:15:44 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 22:15:44 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 22:15:44 ] [ Sci ] Opening device /dev/sci0
[ 22:15:44 ] [ Sci ] Could not open device /dev/sci0 [Might be in use by another process?]
[ 22:15:44 ] [ Loader ] Reset failed ...
[ 22:15:44 ] [ Loader ] Starting Newcamd Server on port 10000
[ 22:15:44 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 22:15:44 ] [ Sci ] Closing device /dev/sci1 [Handle=-1]
[ 22:15:44 ] [ Sci ] Opening device /dev/sci1
[ 22:15:44 ] [ Sci ] Could not open device /dev/sci1 [Might be in use by another process?]
[ 22:15:44 ] [ Loader ] Reset failed ...
[ 22:15:44 ] [ Newcamd ] Newcamd thread Server started on port 10000
[ 22:15:44 ] [ Loader ] Starting Newcamd Server on port 10001
[ 22:15:44 ] [ NewCS ] Ready to GO!
[ 22:15:44 ] [ Newcamd ] Newcamd thread Server started on port 10001
[ 22:15:44 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 22:15:44 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 22:15:44 ] [ Sci ] Opening device /dev/sci0
[ 22:15:44 ] [ Sci ] Could not open device /dev/sci0 [Might be in use by another process?]
[ 22:15:44 ] [ Loader ] Reset failed ...


This goes on forever