Hi mate
Easiest method is by usb make sure its formatted to fat32.
1. Download the USB version
http://www.sat-universe.com/showpost.php?p=555837&postcount=30
2. Unrar and send the vuplus folder to your USB stick.
3. Put the usb stick in the front usb port and turn off the power at the back of the VU near the power cable.
4. Turn back on the power.
On the front display you'll see reading usb device, this takes a while then you'll say erasing then programming.
It will then tell you to remove usb and reboot. Reboot with the power switch at the back.
Ferret