No CA found

[petegib]

DM800SE
I was running ss84b and trying to update the image I uploaded and tried to flash an up grade ss84C and now unable to boot up

'No CA found'

I've looked at various sites for a fix but I don't have a mini usb 'service port' at the back. I have to hole but nothing there. I also don't have the rest button the back of that box.

Can I connect another way or reset somehow.

Any help would be appreciated.:mecry:

 

[petegib]

I also have no 232 port on the dream box to use the null modem cable

 

[BM300]

You may need to connect both RS232 and LAN cables with DreamUp to get your system back.​

 

[johnch121]

You should have a mini usb port on the back of your dm800se you can use this port to reflash your box or you may have a button on the back which says mini flashup, if you have this button press it with the power off then turn you box back on while pushing the button in you should now have an IP address so you can flash it from a browser. Make sure the box is connected to a router.

 

[Ferret]

As above use the miniflashup button on the rear if you dont have that feature then use this guide.

http://www.sat-universe.com/showthread.php?t=211783

You will need a mini usb service cable though to use that guide.

 

[BM300]

He said:
"I have to hole but nothing there. I also don't have the rest button the back of that box."

So it seems that his box is not a normal DM800se or it a DM800.​

 

[Ferret]

Well he does not have a service port either so does it have a serial port ?

 

[Bluesweeper]

no ca

I got this on a few occasions on my sunray 800 hd se..an online reflash to another image has always cured it..

pics show flash button and maint port positions on my sunray

 

[channic]

can you show me a picture of the back of your box?
is nothing strange mini-usb or null modem

 

[Brummie]

800se don't have a com port just the mini usb port.