On other forum :
Hypercam team give us a beautifull gift :
Version 1.01 compatible with major PPC receiver and also with some HD receivers like IPBox9000 and QBOXHD
--------------
Release 1.01
--------------
=> Major release. Now we are no more in 0.xx !
=> Fixed one deadlock case
=> Fixed one null pointer causing hypercam to crash on startup with log disabled
=> Experimental : now supporting other PPC based STB receivers running Enigma 1
=> Experimental : now supporting QBOX HD. Please read the README.QBOXHD for setup instructions
=> Experimental : now supporting IPBOX 9000. Please read the README.IPBOX for setup instructions
HYPERCAM on SH4 - ABCOM IP9000HD / Cuberevo Setup Instructions|
INTRODUCTION
------------
Here is a brief note on installation process required on
ABCOM IP9000 HD / CUBEREVO from DGS.
For now, The hypercam version delivered is only compatible with
firmwares based on DGS images ( including NLB images), and using sbox
as GUI.
Actually, it's only able to manage the 'Live' descrambling !
Future releases will also support PIP / PVR descrambling.
Hypercam has just been adapted to handle decryption operations on
this firmware / drivers. In a 'near' futur, drivers could change on the
receiver and results in hypercam no more decrypting or crashing.
You've been warned !
Also please note that this binary has IP9000 dedicated embedded settings,
so it won't work on other SH4 based STB such as QBoX or others, nor IP9000 under Enigma2 images.
SETUP INSTRUCTIONS
For now, you have to use a very simple installer.
1 - transfer the archive hypercam_1_1_cuberevo.tar into /tmp on receiver
2 - connect with telnet to cuberevo receiver
3- go into /tmp directory ==> cd /tmp
4 - untar the archive ==> tar xvf hypercam_1_1_cuberevo.tar
5 - Be sure the hyper_install.sh script is executable
if not ==> chmod 755 hyper_install.sh
6 - Execute installer
./hyper_install.sh
Confirm installation when prompted
7 - It can be necessary to configure your own settings, by editing file /var/bin/hypercam.cfg
8 - when ready, type :
/var/bin/start_hypercam.sh
All activity reportings are, by default, written in /tmp
hypercam.peers State of connected peers
hypercam.localcards List of cards detected in smartcard readers
hypercam.cards List of all available cards (local & remote)
hypercam.schemes List of available encryption schemes
for current channel
Please mods upload on forum.
Thanks
and thanks hypercam Teams
acer2
Hypercam team give us a beautifull gift :
Version 1.01 compatible with major PPC receiver and also with some HD receivers like IPBox9000 and QBOXHD
--------------
Release 1.01
--------------
=> Major release. Now we are no more in 0.xx !
=> Fixed one deadlock case
=> Fixed one null pointer causing hypercam to crash on startup with log disabled
=> Experimental : now supporting other PPC based STB receivers running Enigma 1
=> Experimental : now supporting QBOX HD. Please read the README.QBOXHD for setup instructions
=> Experimental : now supporting IPBOX 9000. Please read the README.IPBOX for setup instructions
HYPERCAM on SH4 - ABCOM IP9000HD / Cuberevo Setup Instructions|
INTRODUCTION
------------
Here is a brief note on installation process required on
ABCOM IP9000 HD / CUBEREVO from DGS.
For now, The hypercam version delivered is only compatible with
firmwares based on DGS images ( including NLB images), and using sbox
as GUI.
Actually, it's only able to manage the 'Live' descrambling !
Future releases will also support PIP / PVR descrambling.
Hypercam has just been adapted to handle decryption operations on
this firmware / drivers. In a 'near' futur, drivers could change on the
receiver and results in hypercam no more decrypting or crashing.
You've been warned !
Also please note that this binary has IP9000 dedicated embedded settings,
so it won't work on other SH4 based STB such as QBoX or others, nor IP9000 under Enigma2 images.
SETUP INSTRUCTIONS
For now, you have to use a very simple installer.
1 - transfer the archive hypercam_1_1_cuberevo.tar into /tmp on receiver
2 - connect with telnet to cuberevo receiver
3- go into /tmp directory ==> cd /tmp
4 - untar the archive ==> tar xvf hypercam_1_1_cuberevo.tar
5 - Be sure the hyper_install.sh script is executable
if not ==> chmod 755 hyper_install.sh
6 - Execute installer
./hyper_install.sh
Confirm installation when prompted
7 - It can be necessary to configure your own settings, by editing file /var/bin/hypercam.cfg
8 - when ready, type :
/var/bin/start_hypercam.sh
All activity reportings are, by default, written in /tmp
hypercam.peers State of connected peers
hypercam.localcards List of cards detected in smartcard readers
hypercam.cards List of all available cards (local & remote)
hypercam.schemes List of available encryption schemes
for current channel
Please mods upload on forum.
Thanks
and thanks hypercam Teams
acer2
