who have good image of ssl84d 800hd se Sunray4 sim 2.1.0 ?
i used this version can't lock T2 channel in my side, only locked satellite channel well
i used this version can't lock T2 channel in my side, only locked satellite channel well
need image of Sunray4 800SE 84d
- Thread starter ipsat
- Start date
EnoSat
Senior Member
- Messages
- 1,978
and are you sure that your tripletuner also supports DVB-T2 ?
Last edited:
For this image, you must add the DVB-T2 frequencies into the satellite.xml file.
example:
<sat name="DVB-T" flags="0" position="098">
<transponder frequency="1578500" symbol_rate="07000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="1606500" symbol_rate="07000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="1592500" symbol_rate="07000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="1585500" symbol_rate="07000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="1571500" symbol_rate="07000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
</sat>
Change the frequency's and symbol rate for your region.
Then in satellite setup you will have a satellite called DVB-T, you must then assign it a LNB number, e.g LNB 3
and the LNB type is set to User defined.
LOF/L is 00000
LOF/H is 00000
Threshold is 00000
Make sure the dvb-t2 coax cable is plugged into the t2 port on the tuner. Do a single satellite scan on DVB-T satellite and if you have entered the frequencies correctly it will scan the dvb-t2 channels
sure, this image show Tuner A DVB-S2, Tuner B DVB-T and Tuner C DVB-C and my 800SE https://pasteboard.co/EMBDUtYNZI0m.png
EnoSat
Senior Member
- Messages
- 1,978
tried your way still same can't lock T2 channel, tried many different image not help also, i think need correct image can solve .
</sat>
<sat name="local DVB-T" flags="1" position="007">
<transponder frequency="4900000" symbol_rate="8000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="4980000" symbol_rate="8000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="5140000" symbol_rate="8000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="5220000" symbol_rate="8000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="5300000" symbol_rate="8000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="5540000" symbol_rate="8000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="5620000" symbol_rate="8000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="5780000" symbol_rate="8000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="5860000" symbol_rate="8000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="5940000" symbol_rate="8000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
</sat>
LOF/L is 00000
LOF/H is 00000
Threshold is 11700
and
LOF/L is 00000
LOF/H is 00000
Threshold is 00000
all setup like these can't lock T2 channel, LNB choosed LNB 2 or 3 or 4,5,6 all is same
<sat name="local DVB-T" flags="1" position="007">
<transponder frequency="4900000" symbol_rate="8000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="4980000" symbol_rate="8000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="5140000" symbol_rate="8000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="5220000" symbol_rate="8000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="5300000" symbol_rate="8000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="5540000" symbol_rate="8000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="5620000" symbol_rate="8000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="5780000" symbol_rate="8000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="5860000" symbol_rate="8000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="5940000" symbol_rate="8000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
</sat>
LOF/L is 00000
LOF/H is 00000
Threshold is 11700
and
LOF/L is 00000
LOF/H is 00000
Threshold is 00000
all setup like these can't lock T2 channel, LNB choosed LNB 2 or 3 or 4,5,6 all is same
tryget T2 tuner of 800HD SE is very hard now
symbol_rate="08000000"
if that doesn't work also try changing
polarization="1"
Threshold must be 00000
I have used this image and this method works fine.
