NEED HELP URGENT!!!!!

[mahmoodasif]

Hi I uploaded the wrong image onto my technomate 500 super

now it wont boot

how can I re-flash image triedr232 will not connect via tcc

any help

thanks

 

[barney115]

Switch off via button at back top left .
hold in the UP button on front Disply of box
keep pressing it while you switch box on again
use the arrow keys to select Factory Reset and press the ok button ..wait for box to reboot as normal ,
next time ensure you flash box with correct image
i would suggest this UR Image uploaded by our fellow Admin Ferret Here => http://www.sat-universe.com/showthread.php?t=119368&page=6

ive always found that image to be very reliable and without any real issues .
Good luck : )

---
Barney2222

 

[amdaley]

Would this procedure work on all Technomate boxes ?

 

[barney115]

Would this procedure work on all Technomate boxes ?

Absolutely Not Sorry .
Simply because not all Technomate range boxes use linux firmware
most Technomate boxes use closed source firmware patches which is totally different therefor the procedure i mentioned simply will not work .
i have recovered few tm500S ,TM600s and TM800HD boxes with method i mentioned however .
Good luck : )

---
Barney2222

 

[RobinT]

TM 5400+m Super

please can you advice my TM5400+ super CI
keeps crashing what is the best firmware to fix it?
as I'm stuck

yours hopefully
robint

 

[amdaley]

Absolutely Not Sorry .
Simply because not all Technomate range boxes use linux firmware
most Technomate boxes use closed source firmware patches which is totally different therefor the procedure i mentioned simply will not work .
i have recovered few tm500S ,TM600s and TM800HD boxes with method i mentioned however .
Good luck : )

---
Barney2222

Sorry Barney I didn't explain myself more clearly.
I meant all Technomate Linux based boxes :thum:

 

[barney115]

please can you advice my TM5400+ super CI
keeps crashing what is the best firmware to fix it?
as I'm stuck

yours hopefully
robint

The best is always the most recent ,
but in your case your box is only basically a Free To Air box
with a Cam Slot and there has been and will not be no new firmware Technomate stopped supporting your box 3 years ago
The most recent patch was TM5400CI_5600CI_M2_159p_22-10-2012 .

Sorry Barney I didn't explain myself more clearly.
I meant all Technomate Linux based boxes :thum:

I Think so but obviously different boxes require different image ,
be very carefull to flash image that is for Your box as other images will lead to big issues that should be avoided easily .

cheers !
-
Barney2222