MUTV (Biss @ 9°E & 10°E) *** Chat Only Here, No Keys ***

[barney115]

yes sorry MajicM but manic01 is correct .

 

[barney115]

There is a BISS encrypted Feed for this pre-season game on 7 east
12560 H 14240sr on 7 east

but key is unknown im afraid .

---
Barney

 

[briosa]

Manchester United TV

Hi friends (sorry if there`s already another post about this, didn`t find it...), why I have problems to make a search and find ManUnited TV at 10ºE?? With 800SE I got the channel after a too long time in "search" and with 800HD I cann`t get it in "Search"... Any tips ? thanks:thum:

 

[empb]

I take it you used tried using the same parameters your 800SE finds it at on your 800HD, my Technomate scans it at 10E 11.547 V SR 1.613 if that helps ?

 

[briosa]

Yes, the parameters are correct, in 800SE v.2 it takes some more time but I get the channel when I do a "Manual Search", but I cann`t get the same result with 800HD... even if I send the channels list I have in 800SE to the 800HD, it doesn`t have signal... strange, because in 800SE I have about 85% signal.

 

[gotya]

here when I do blindscan with my receiver the TP will be saved as 11549 V 1613

and the channel ID is : Unname

regards

 

[empb]

Just tested with my older Humax HDCI-2000 and that seems to have, the same issue (MGM ok, MUTV not). TM7102 & Spiderbox are ok ... more tests to do (check the looptrough connections tomorrow)

It probably the low symbol rate, DVB-S2 & receiver/tuner threshold....

 

[barney115]

10East 11547 v 1614 Fec 7/8 DVB-S2 8PSK - MUTV Feed Scans in just fine for me on my DM800SE HD with the following ID
11547V SID 0x01


@briosa ..is your DM800HD a clone ??
if so then you have no chance at all the tuner in clone boxes simply can not scan freq's where symbol rate is so low ive tried few nights ago to scan in Mutv feed on a clone Dm800HD but in the end i gave up my genuine Dm800SE HD scans it in but also takes around 45secs to find with a manual scan ....
but with the clone Dm800HD is a waste of time
"Scan Complete
0 Services Found" messsage !!

 

[rqaoud]

put pilot off in manual search

 

[empb]

10 EAST
11483 V 4000 FEC 5/6 DVB-S2 8PSK
Tagged as " MUTV International "

I can't catch signal on this freq, has it left or is it weaker than the 11547V SR 1613 Fec 5/6 (DVB-S2 8PSK) one?

 

[Dave5118]

Is 11483 V 4000 FEC 5/6 still on Barney, not getting it here.

 

[FanOfSat]

MUTV on 11547V SR 1613 Fec 5/6 (DVB-S2 8PSK)is still on.
No probs with signal here in germany.


Edit: MUTV International 11483 V 4000 FEC 5/6 DVB-S2 8PSK OK, too.
here about 67%Signal

 

[manic01]

11483 V 4000
MUTV International
97% level 75% qual
TM5402 MK1 TD110 dish inverto black ultra lnb

 

[barney115]

11483 V 40000
MUTV International
97% level 75% qual
TM5402 MK1 TD110 dish inverto black ultra lnb

Symbol Rate is 4000 NOT 40000

Still fine i think this maybbe an uplink Feed for the New MUTV HD channel launching shortly on 28.2 East :thum:
i just found it with a blind scan this morning it was not there yesterday .
cheers .
-
Barney2222

 

[manic01]

Yes was mistake in posting but we know it was meant to be 4000 lol

 

[Coastman]

Steady signal on 11483v at the moment using tm5402hd mk1 and 1.1 dish S97% Q73%. Not quite as good as 11547v.

 

[harshy]

I don't get either it must be my dreambox :-(

 

[empb]

I don't get either it must be my dreambox :-(

I can't get it on either the Technomate TM7102 HD-T2 Super or Spiderbox HD9000

 

[barney115]

Not sure why your not locking on this empb even on my TSB USB Qbox i can get good enuff signal aswell with no pixelations
10 East 11483 v 4000 Fec 5/6 DVB-S2 8PSK [ Try with PILOT OFF Maybbe ? ]

its even stronger than the old MUTV Biss feed on 10 East 11547 v 1614 Fec 5/6 DVB-S2 8PSK...

 

[Dave5118]

Nope not getting a sniff of it here either, good signal on 11547v though.