mount E2 usb with script

[pooyair]

hi
i flashed sifteam dgs and use a script that mount a enigma2 usb file and work with aaf multimedia and i could multiboot aaf with this method but when i want to multiboot PKT mod 1.0.3.312 or ACT rev 3 when i press 5 on boot there is no success.
the method is run is
1. install multiboot_config.zip (http://cuberevo-digital.com/new/cs_...293176774&mode=view&code=146&category=&page=1)


also install

http://www.4shared.com/file/8wtAflEQ/install_E2.html


2. format usb with the script
3. rename the enigma2_usb.var.tar.gz to E2.var.gz
4. move E2.tar.gz to mnt/usb
5. run script scrplg-Install_E2.sh
6. when the box is booting push for some second button 5 (
if you have hard internal press 2 instead of 5
if you want to load flash version press 3 (dgs flashed version))

7. in box pannel now you see nule and must wait for 20 minutes to run aaf multimedia,

i test this method and work with aaf multimedia Full usb with my ipbox 91hd but with pkt and act not worked.
i know this question answered for many times in this forum but 91hd box doesn't have RS232 socket for connecting and for multiboot i must flash uboot am i right?



my question is : please someone tell me how can i multiboot pkt 1.0.3.312 with sifteam dgs step by step

thanks

 

[DKaftermath]

format USB stick from DGS image.

reboot box

FTP to /mnt/usb/usb0

FTP the e2.tar.gz image into /mnt/usb/usb0

open tenet programme ( i use Putty )

root
sifteam
cd /mnt/usb/usb0
tar zxvf E2.tar.gz ( ow what ever the image name is )

sit back and wait up to 30 mins until all unpacking is done.
type in "sync" without the ""
then "sync" again.

switch off the reciever and back on and keep the 2 button pressed until you see " multiboot2 " thats if you got internal HDD.


I think it might be 5 if you dont have internal HDD, but someone will correct me if i am wrong here.

Thats a basic and easy way to flash E2 to USB

Have fun

 

[pooyair]

thanks DKaftermath
how much time does it take every time to multiboot the box (how much time does it take the box load with usb e2)

"type in "sync" without the ""
then "sync" again."

2 times i must type sync?

 

[DKaftermath]

thanks DKaftermath
how much time does it take every time to multiboot the box (how much time does it take the box load with usb e2)

"type in "sync" without the ""
then "sync" again."

2 times i must type sync?

yes 2 times sync

in the past sometimes first time dont work, so i got a habit of doing it twice.

E2 takes a lot longer to boot, especially the first time, after that takes less time to boot,

hope this helps you.