Motor Stab HH 120 - usals don't work

[markez]

My motor stab hh120 work for 3 year in "usals" perfect.
After a strong wind the motor lose the "0" position - in uslas is still moving but finding no satellites. In my Dreambox HD8000 i try to use the Go to "0" (reset of motor?!?) but the motor doesn't move to my basic satelitte (HB 13 East).
The manual setup of satellites works (!!)but "usals" no chance.

Any ideas how to reset my Stab hh120 to the right "0" position???

 

[Jan Gruuthuse]

drive motor to zero position on the dial with buttons on motor. When 100% at zero on dial, perform reset of motor. Check your latitude and longitude settings in your receiver. When these are correct, select hotbird satellite on receiver and give goto command. Slightly loosen the bolts on the pole: so you can turn dish on horizontal axis. Find strongest signal on hot bird and tighten bolts. Now do the same for up/down: slightly loosen bolts and move dish up and down until you find strongest signal on hotbird. Tighten bolts, that should be it. Best practice is to adjust to satellite close to your south from your location that you can receive. For Belgium that would be 4.8° East. Check at dishpointer for your location, the green line should be nearly vertical for your location.

 

[mirobilly]

I have motor stab hh 100 with usals option in my triple dragon for 6 years working perfectly but now i have dreambox dm 600 pvr and can not fix to work with usals option. Motor move to satellites and scan but can not lock after...that why is not working...!How to fix this problem because i want apsolutely to have usals option!?

 

[alfred_1]

drive motor to zero position on the dial with buttons on motor. When 100% at zero on dial, perform reset of motor. Check your latitude and longitude settings in your receiver. When these are correct, select hotbird satellite on receiver and give goto command. Slightly loosen the bolts on the pole: so you can turn dish on horizontal axis. Find strongest signal on hot bird and tighten bolts. Now do the same for up/down: slightly loosen bolts and move dish up and down until you find strongest signal on hotbird. Tighten bolts, that should be it. Best practice is to adjust to satellite close to your south from your location that you can receive. For Belgium that would be 4.8° East. Check at dishpointer for your location, the green line should be nearly vertical for your location.

Your whole setup (Dish & Motor) must have slightly moved East or West. I think the best thing is to go on Hot Bird (Command given from Receiver although it might overshoot or undershoot the Satellite) and then loosen the Bracket nuts on the Pole (not much) and then rotate slightly the Dish and Motor locked together until you find the Best signal on Hot/Bird, then tighten the fixing nuts properly and thats it.

 

[alfred_1]

I have motor stab hh 100 with usals option in my triple dragon for 6 years working perfectly but now i have dreambox dm 600 pvr and can not fix to work with usals option. Motor move to satellites and scan but can not lock after...that why is not working...!How to fix this problem because i want apsolutely to have usals option!?

Bring up Hotbird as your Satellite.....Go to Setup>service searching>Tuner Configuration>Configuration Mode=Simple and insert your Longitude and Latitude parameters Press 'ok'

Thats it.