mgcamd and crfra+ card

[wilcoblue]

hi all, I have been trying to get cyfra+ card working with mgcamd and newcs with no success, it works ok with ccam but I want to use mgcamd, newcs sees the card ok and identfies it but no picture. anyone have any idea whats wrong.

 

[ARMAGEDOON]

look in the post and config newcs and newcamd list
http://www.sat-universe.com/showthread.php?t=176173

 

[wilcoblue]

boxkey

thanks, looks like boxkey is needed as well but I only have card.

 

[traxe]

If you read well the newCSconfig box key and RSA are need for the second card (dev/sci1) which is for polsat nagra3, not for cyfra which is in /dev/sci0 .

 

[wilcoblue]

you,r right I did,nt look close. after putting in settings in newcs and starting cardserver on my dm 7020 with pli jade image there is still no picture, newcs 1.67 sees and identifies card as 0100 ok and I have entered this no in allow list, in newcamd.list I have ip address of box instead of loopback but this usualy makes no difference.

 

[ARMAGEDOON]

Enter your config newcs ,and entry in the newcamd list

 

[wilcoblue]

I have my config entered correctly in newcamd.list but stil no good. is the card id 0100 correct because this is what I have in allow list in newcs config.

 

[ARMAGEDOON]

i am Polish and I use the translator can ill explain to paste your config newcs and newcamd lists i am looking on the config
this is main
<newCSconfig>

<readers name="Card in dream">
<device>
<name>multicam</name>
<type>dbox</type>
<node>/dev/tts/1</node>
<mhz>600</mhz>
<parity>even</parity>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<carddetect>no</carddetect>
<newcamd_port>11000</newcamd_port>
<autosid>no</autosid>
<Seca-PPV>no</Seca-PPV>
<priority>round</priority>


and newcamd list

CWS = localhost 11000 lokal lokal 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan dbox2

 

[wilcoblue]

hi, I have already got a sly card working on mgcam+ newcs 1,67 but this was not working with cyfra+ but now I have discovered that newcs 1.62 opens cyfra+ then the sly card does not work, so I need to find way for newcs to open both cards. thanks for your help so far.