Method of Opening PowerVu Channels in Enigma2 Using Oscam

A

abrasat

Registered
Messages
43
Thank you for the reply. I meant the part before the URL. I understand that one of the parameters is the SID. What do the other numbers mean ?

#SERVICE 1:0:1:2:1:9:5A0000:0:0:0:
 
L

Lexzie

Registered
Messages
151
abrasat said:
Thank you for the reply. I meant the part before the URL. I understand that one of the parameters is the SID. What do the other numbers mean ?

#SERVICE 1:0:1:2:1:9:5A0000:0:0:0:
Click to expand...

The format is
#SERVICE <stream type>:0:<service type>:<SID>:<TID>:<NID>:<namespace>:0:0:0:

Where <DVB-type> is f.e.
4096: for non-TS
1: for DVB/TS

<service type> is
1: TV
2: radio
16 or 19: HDTV
etc.

SID = Service ID
TID = Transponder ID
NID = Network ID
namespace is (AFAIK) a unique describer per satellite (also more than one per satellite)/cable/terrestrial


So, in your example the SID is 2, the TID is 1 and NID is 9.
 
U

uplotre

Registered
Messages
19
Lexzie said:
I'm having more troubles tuning into these re-streams.
Also channels who work very well sometimes also give the message 'no data on transponder! (Timeout reading PAT)'.
I beleive the config is right, example:
Code: 
#SERVICE 1:0:1:4:1:9:5A0000:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3a4%3a1%3a9%3a5A0000%3a0%3a0%3a0%3a:Pacific
#DESCRIPTION Pacific
#SERVICE 1:0:1:A:B:16:21:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3aA%3a1%3a9%3a5A0000%3a0%3a0%3a0%3a:Movie
#DESCRIPTION Movie
You can see in the first one I used the original Transponder ID, Network ID and namespace and in the other 11, 22, 33 (B, 16, 21).
Both work and I was planning on rewriting everything to the first format for EPG reasons.

I think the problem is that the streamrequest is not causing the tuner to tune into the signal.
I can see that because the tuner is not busy. If I tune in to a normal channel I get signal right away, so no problem with tuning into a frequency or with receiving the satellite.
Strangly enough that rebooting the receiver solves the problem for a little while (not always).

My hardware is a Xtrend ET10000 with two Si2169 DVB-C/DVB-T2 tuners, two AVL6211 DVB-S2 tuners, one TBS-5925 DVB-S2 USB tuner and one RTL2842U/820T USB tuner (DVB-T).
I use a fairly recent image from Satdreamgr which is based on OpenPLi. Right now I have:
Image: Satdreamgr-openpli-gst1 4
Kernel: 4.0.1
Enigma: 2016-10-01-(detached from 6103323)
GStreamer: 1.6.3
DVB drivers: 2016-04-20
Pythonversion: 2.7.3

I use OScam r11271 with EMU (off course), this is the latest version supplied in the feed. If I want to use a more recent version I have to build it myself what I use to do with Simplebuild by Gorgone on a Debian PC but that PC has crashed,l so I'd rather not have to build it but if that certainly solves this I have to see if I can build it on Windows or have to get a new Debian/Linux PC.

I don't know what to do anymore but I'm done rebooting...
Anyone else have this problem?

By the way I use Satdreamgr because to my knowledge it's the only image which supports Multistream reception on my TBS5925 tuner.
Click to expand...

Try like this:

Code: 
#SERVICE 1:0:1:4:1:9:5A0000D:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3a4%3a1%3a9%3a5A0000%3a0%3a0%3a0%3a:Pacific
#DESCRIPTION Pacific
 
R

Robinson74

Registered
Messages
558
Guys,
Can anyone please help me set up my PowerVu reception?
I would appreciate it if someone could share their channel list and SoftCam.Key entries for PowerVu.
I am particularly interested in AFN channels.
Thanks a lot.
 
R

Robinson74

Registered
Messages
558
Thanks, I will use your SoftCam.Key but as far as I know keys is one thing and a channel list with stream relay is another thinh which is crucial. Also, a correct oscam emu configuration plays its part.
 
Serjoga

Serjoga

Latvian satfat
Staff member
Moderator
Messages
6,085
Robinson74 said:
Thanks, I will use your SoftCam.Key but as far as I know keys is one thing and a channel list with stream relay is another thinh which is crucial. Also, a correct oscam emu configuration plays its part.
Click to expand...


Sure, you need instaled oscam for powervu and add channels in IPTV format in bouquet. I use OpenPli image and one old oscam 11242 and all powervu works fine.
 
R

Robinson74

Registered
Messages
558
technodvl2 said:
are you sure the box the you use can view powervu
Click to expand...
Sure. It used to work about a year ago but then I changed images and I must have forgotten about something.
Can anyone please help me with their AFN (9E) stream relay channel list?
Is this userbouquet correct?
Code: 
#DESCRIPTION ***   9.0E   ***   11804 V
#SERVICE 1:0:1:B:B:16:21:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3aB%3a1%3a9%3a5A0000%3a0%3a0%3a0%3a:HD SPORTS
#DESCRIPTION HD SPORTS
#SERVICE 1:0:1:1:B:16:21:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3a1%3a1%3a9%3a5A0000%3a0%3a0%3a0%3a:Sports
#DESCRIPTION Sports
#SERVICE 1:0:1:6:B:16:21:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3a6%3a1%3a9%3a5A0000%3a0%3a0%3a0%3a:Sports2
#DESCRIPTION Sports2
#SERVICE 1:0:1:A:B:16:21:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3aA%3a1%3a9%3a5A0000%3a0%3a0%3a0%3a:Movie
#DESCRIPTION Movie
#SERVICE 1:0:1:2:B:16:21:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3a2%3a1%3a9%3a5A0000%3a0%3a0%3a0%3a:Atlantic
#DESCRIPTION Atlantic
#SERVICE 1:0:1:9:B:16:21:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3a9%3a1%3a9%3a5A0000%3a0%3a0%3a0%3a:Fam/Pulse
#DESCRIPTION Fam/Pulse
#SERVICE 1:0:1:5:B:16:21:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3a5%3a1%3a9%3a5A0000%3a0%3a0%3a0%3a:News
#DESCRIPTION News
#SERVICE 1:0:1:4:B:16:21:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3a4%3a1%3a9%3a5A0000%3a0%3a0%3a0%3a:Pacific
#DESCRIPTION Pacific
#SERVICE 1:0:1:3:B:16:21:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3a3%3a1%3a9%3a5A0000%3a0%3a0%3a0%3a:Spectrum
#DESCRIPTION Spectrum
#SERVICE 1:0:1:7:B:16:21:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3a7%3a1%3a9%3a5A0000%3a0%3a0%3a0%3a:Guide
#DESCRIPTION Guide

Also, what oscam_emu configuration entries do you use for PowerVU?
Is this correct?
Code: 
[streamrelay]
stream_ecm_delay              = 620
 
T

technodvl2

Registered
Messages
251
I must have forgotten about something.

you must know by now
not every box is the same
and the more info you give
the more help you will receive

I'll ask again

what box

i'll send channel list
check PM you have link to it
 
Last edited:
R

Robinson74

Registered
Messages
558
Hi,
Thanks for the PM. I will try it soon. Is stream relay enabled by default in recent oscam_emu releases or do I have to enable it?
By the way, my box is ET9000 with OpenPLi.
 
Last edited:
R

Robinson74

Registered
Messages
558
I have now copied your AFN package to my channel list but there is still no picture so my channel list was not an issue.

This is my oscam log:

Code: 
2016/11/20 13:57:23 73BDA7BC c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 177B ANY CHID PMTPID 1393 VPID 0582
2016/11/20 13:57:23 16BBAFA7 r [Emu] Key not found: P 000B 01
2016/11/20 13:57:23 16BBAFA7 r [Emu] ECM failed: Key not found
2016/11/20 13:57:23 73BDA7BC c (ecm) dvbapi (0E00/000000/000B/177B/40:0337B9350C5412EB2FC3AB2E3C4B2B51): not found (4 ms) by emulator - HD SPORTS
2016/11/20 13:57:24 00000000 [Emu] Key not found: P 000B 01
2016/11/20 13:57:24 73BDA7BC c (dvbapi) Demuxer 0 restarting decodingrequests after 2 ms with 1 enabled and 0 disabled ecmpids!
2016/11/20 13:57:24 73BDA7BC c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 177B ANY CHID PMTPID 1393 VPID 0582
2016/11/20 13:57:24 00000000 [Emu] Key not found: P 000B 01
2016/11/20 13:57:24 16BBAFA7 r (-) -- Skipped 1 duplicated log lines --
2016/11/20 13:57:24 16BBAFA7 r [Emu] ECM failed: Key not found
2016/11/20 13:57:24 73BDA7BC c (ecm) dvbapi (0E00/000000/000B/177B/40:B256AC81C3DE104328A40EA3E2CF7E1F): not found (4 ms) by emulator - HD SPORTS
2016/11/20 13:57:25 73BDA7BC c (dvbapi) Demuxer 0 restarting decodingrequests after 2 ms with 1 enabled and 0 disabled ecmpids!
2016/11/20 13:57:25 73BDA7BC c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 177B ANY CHID PMTPID 1393 VPID 0582
2016/11/20 13:57:25 00000000 [Emu] Key not found: P 000B 01
2016/11/20 13:57:25 16BBAFA7 r (-) -- Skipped 1 duplicated log lines --
2016/11/20 13:57:25 16BBAFA7 r [Emu] ECM failed: Key not found
2016/11/20 13:57:25 73BDA7BC c (ecm) dvbapi (0E00/000000/000B/177B/40:DCB2A19BCF20E0403CE483B21D49682E): not found (5 ms) by emulator - HD SPORTS
2016/11/20 13:57:26 00000000 [Emu] Key not found: P 000B 01
2016/11/20 13:57:26 73BDA7BC c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
2016/11/20 13:57:26 73BDA7BC c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 177B ANY CHID PMTPID 1393 VPID 0582
2016/11/20 13:57:26 16BBAFA7 r [Emu] Key not found: P 000B 01
 
R

Robinson74

Registered
Messages
558
Indeed. I updated my Softcam.Key and now most of the channels work although there are still a couple of them which do not open:

Code: 
2016/11/20 23:35:43 00000000 [Emu] stream client 1 disconnected
2016/11/20 23:35:43 00000000 [Emu] stream client 0 connected
2016/11/20 23:35:43 00000000 [Emu] stream client 0 request /1:0:1:2:1:9:5A0000:0:0:0:
2016/11/20 23:35:43 73BDA7BC c (dvbapi) Demuxer 0 stop descrambling program number 000B (HD SPORTS)
2016/11/20 23:35:43 73BDA7BC c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 1772 PROVID: 000000
2016/11/20 23:35:43 73BDA7BC c (dvbapi) Demuxer 0 found 1 ECMpids and 10 STREAMpids in caPMT
2016/11/20 23:35:43 73BDA7BC c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1772 ANY CHID PMTPID 138A VPID 04EC
2016/11/20 23:35:44 73BDA7BC c (dvbapi) Demuxer 0 found 1 ECMpids and 10 STREAMpids in PMT
2016/11/20 23:35:44 16BBAFA7 r [Emu] Key not found: P 0002 01
2016/11/20 23:35:44 16BBAFA7 r [Emu] ECM failed: Key not found
2016/11/20 23:35:44 73BDA7BC c (ecm) dvbapi (0E00/000000/0002/1772/40:AEF2D52093E7176023BF91E796819797): not found (5 ms) by emulator - Atlantic
2016/11/20 23:35:44 00000000 [Emu] Key not found: P 0002 01
2016/11/20 23:35:44 73BDA7BC c (-) -- Skipped 1 duplicated log lines --
2016/11/20 23:35:44 73BDA7BC c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
2016/11/20 23:35:44 73BDA7BC c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1772 ANY CHID PMTPID 138A VPID 04EC
2016/11/20 23:35:44 16BBAFA7 r [Emu] Key not found: P 0002 01
2016/11/20 23:35:44 16BBAFA7 r [Emu] ECM failed: Key not found
2016/11/20 23:35:44 73BDA7BC c (ecm) dvbapi (0E00/000000/0002/1772/40:A33D4C9A54A298485C98390A2715DB3F): not found (6 ms) by emulator - Atlantic
2016/11/20 23:35:45 00000000 [Emu] Key not found: P 0002 01
2016/11/20 23:35:45 73BDA7BC c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
2016/11/20 23:35:45 73BDA7BC c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1772 ANY CHID PMTPID 138A VPID 04EC
2016/11/20 23:35:45 00000000 [Emu] Key not found: P 0002 01
2016/11/20 23:35:45 16BBAFA7 r (-) -- Skipped 1 duplicated log lines --
2016/11/20 23:35:45 16BBAFA7 r [Emu] ECM failed: Key not found
2016/11/20 23:35:45 73BDA7BC c (ecm) dvbapi (0E00/000000/0002/1772/40:A474BF98BA6D26E13CC1E1A1E818B2B1): not found (5 ms) by emulator - Atlantic
2016/11/20 23:35:46 73BDA7BC c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
2016/11/20 23:35:46 73BDA7BC c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1772 ANY CHID PMTPID 138A VPID 04EC
2016/11/20 23:35:46 00000000 [Emu] Key not found: P 0002 01

The keys are the same as for AFN Sports HD yet Atlantic does not open.

P 0002 00 XXXXXXXXXXXXXX ;AFN Prime Atlantic Benelux,9.0E, 11804
P 0002 01 XXXXXXXXXXXXXX ;AFN Prime Atlantic Benelux,9.0E, 11804
 
You must log in or register to reply here.
Top