Method of Opening PowerVu Channels in Enigma2 Using Oscam

DeepImpact · Aug 18, 2015

saty said:
This is the cfg of my Biss reader:
[reader]
label = biss_reader
description = Biss Reader
enable = 0
protocol = constcw
device = /usr/keys/oscam/constant.cw
caid = 2600
ident = 2600:000000
group = 3

thanks for ur reply.
But from your reader, enable = 0 suppose to mean ur reader are Disable/OFF, if enable = 1 are Enable reader as I know (correct me if I'm wrong) , so ur oscam emu are reading your constant.cw key by default without any specific reader ? thank yoy.

satmafia · Aug 18, 2015

DeepImpact said:
thank you my friend... but strange problem for me... this version do not start oscam at all for me... connection refused even power OFF and ON again for my box... switch back to your previous release then oscam start again... any one having same problem like me (DM800SE) ? as i read cbr900 comment work ok for him... thanks !

Make sure the binary was properly copied to your box. I really have no idea why it might not start at all. I am using the same binary on my box and it starts well.
I noticed that file size has increased significantly comparing to older version of oscam-emu patched oscam using the same svn version of oscam.

DeepImpact · Aug 18, 2015

satmafia said:
Make sure the binary was properly copied to your box. I really have no idea why it might not start at all. I am using the same binary on my box and it starts well.
I noticed that file size has increased significantly comparing to older version of oscam-emu patched oscam using the same svn version of oscam.

I just re-download again the file, unzip and i notice the file size are not same with the one i download yesterday (if i'm not mistaken) ... as i'm away from my box now and i will try again with the newly download one and see... thanks again for your help !! :thum:

kingcarlos · Aug 18, 2015

Hi ,

I try to open E!EEUR with a vu solo clone but i cant find any solution. I get valid ecm but no picture. Does anybody find a way to open. I use Openpli clone from late 2014 (ferrari clone image) . I have also and an original VUUNO with latest pli and no screen . This is the log of oscam.

2015/08/18 10:05:09 56CED286 c (dvbapi) Demuxer 0 continue decoding of SRVID 0474
2015/08/18 10:05:09 56CED286 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 0739 PROVID: 000000
2015/08/18 10:05:09 56CED286 c (dvbapi) Demuxer 0 found 1 ECMpids and 30 STREAMpids in PMT
2015/08/18 10:05:09 56CED286 c (dvbapi) Demuxer 0 serving srvid 0474 (0E00@000000:0474 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0108
2015/08/18 10:05:09 56CED286 c (ecm) DVBApi (0E00@000000/0000/0474/40

DCF4012DA6B9B7A205ECEE478F56B10): found (10 ms) by EMU
2015/08/18 10:05:10 56CED286 c (ecm) DVBApi (0E00@000000/0000/0474/40:62B76FFD6A484DC8EBBE0E96D1991955): found (10 ms) by EMU
2015/08/18 10:05:10 56CED286 c (ecm) DVBApi (0E00@000000/0000/0474/40:1A8B203D18CFF59DAA68F47D9C1241E4): found (16 ms) by EMU .

satmafia · Aug 18, 2015

enrico1 said:
this oscam working very good...Can you make with libusb?

It is now uploaded here: https://mega.nz/#!8Ydl3KZD!0hYesiENGepXj4h9foMLY9t9knyK4u6D6dUt7hAZFKQ

saty · Aug 18, 2015

DeepImpact said:
thanks for ur reply.
But from your reader, enable = 0 suppose to mean ur reader are Disable/OFF, if enable = 1 are Enable reader as I know (correct me if I'm wrong) , so ur oscam emu are reading your constant.cw key by default without any specific reader ? thank yoy.

Yes its disabled course OSCAM Emu takes care of the Biss channels, but it works if i enable it and remove 2600 CAID from the emu reader using the latest version of the OSCAM posted here.

proce563 · Aug 18, 2015

ahmedmoselhi said:
i have a problem on afn @ 9.0 E only sport2 and prime pacific are working but movies, sports, extra channels not able to decode.Any suggestions?

###################
# AFN 9°E PowerVu #
###################
P 10 01 9E83D4513F3B23
P 20 01 9E83D4513F3B23
P 30 01 9E83D4513F3B23
P 40 01 9E83D4513F3B23
P 50 01 9E83D4513F3B23
P 60 01 9E83D4513F3B23
P 70 01 9E83D4513F3B23
P 90 01 9E83D4513F3B23
P A0 01 9E83D4513F3B23
P B0 01 9E83D4513F3B23
P 140 01 9E83D4513F3B23
P 150 01 9E83D4513F3B23
P 160 01 9E83D4513F3B23
P 170 01 9E83D4513F3B23
P 180 01 9E83D4513F3B23
P 190 01 9E83D4513F3B23
P 1B0 01 9E83D4513F3B23
P 1C0 01 9E83D4513F3B23
P 1D0 01 9E83D4513F3B23
P 1F0 01 9E83D4513F3B23
P 200 01 9E83D4513F3B23
P 210 01 9E83D4513F3B23
P 230 01 9E83D4513F3B23
Post #410 thanks to Satmafia

ahmedmoselhi · Aug 18, 2015

proce563 said:
###################
# AFN 9°E PowerVu #
###################
P 10 01 9E83D4513F3B23
P 20 01 9E83D4513F3B23
P 30 01 9E83D4513F3B23
P 40 01 9E83D4513F3B23
P 50 01 9E83D4513F3B23
P 60 01 9E83D4513F3B23
P 70 01 9E83D4513F3B23
P 90 01 9E83D4513F3B23
P A0 01 9E83D4513F3B23
P B0 01 9E83D4513F3B23
P 140 01 9E83D4513F3B23
P 150 01 9E83D4513F3B23
P 160 01 9E83D4513F3B23
P 170 01 9E83D4513F3B23
P 180 01 9E83D4513F3B23
P 190 01 9E83D4513F3B23
P 1B0 01 9E83D4513F3B23
P 1C0 01 9E83D4513F3B23
P 1D0 01 9E83D4513F3B23
P 1F0 01 9E83D4513F3B23
P 200 01 9E83D4513F3B23
P 210 01 9E83D4513F3B23
P 230 01 9E83D4513F3B23
Post #410 thanks to Satmafia

i tried these keys but same problem. i use openatv 5.0 image on vu+ solo2

enrico1 · Aug 18, 2015

satmafia said:
It is now uploaded here: https://mega.nz/#!8Ydl3KZD!0hYesiENGepXj4h9foMLY9t9knyK4u6D6dUt7hAZFKQ

Thank you,but for me not working good...:mecry:

satmafia · Aug 18, 2015

enrico1 said:
Thank you,but for me not working good...:mecry:

Sadly I have no USB card readers and binaries compiled with libusb does not power up at all, so I just compiled it with the parameter you asked, but I couldn't test it at all.

bojo59 · Aug 18, 2015

ahmedmoselhi said:
i tried these keys but same problem. i use openatv 5.0 image on vu+ solo2

Delete all the other keys, from file Softcam.Key!

joeuser · Aug 18, 2015

Code:

PowerVU config
==============

Keys in SoftCam.Key:
	P <srvid> <nb> <key>
	example:
	P 1234 01 11223344556677

	For channels with same srvid:
	Channel #1: P  1234 01 11223344556677
	Channel #2: P 11234 01 11223344556677
	Channel #3: P 21234 01 11223344556677
	
	AU keys:
	P <srvid> <UA> <key>
	example:
	P 1234 11223344 11223344556677

edyy96 · Aug 18, 2015

joeuser said:

Code:

PowerVU config
==============

Keys in SoftCam.Key:
	P <srvid> <nb> <key>
	example:
	P 1234 01 11223344556677

	For channels with same srvid:
	Channel #1: P  1234 01 11223344556677
	Channel #2: P 11234 01 11223344556677
	Channel #3: P 21234 01 11223344556677
	
	AU keys:
	P <srvid> <UA> <key>
	example:
	P 1234 11223344 11223344556677

what is the key AU ?
How do I know what is the number?

g_sahota · Aug 19, 2015

saty said:
This version works great on my VuSolo2,/ATV 4.2
No problems with internal readers or hickups ect with PowerVu channels.
Thanks very much

have you created binary of above patch? if yes then please upload.

boyet05 · Aug 19, 2015

edyy96 said:
what is the key AU ?
How do I know what is the number?

Try this, not so sure though . . . . .

UA key

zsbgay · Aug 20, 2015

Please continue to update oscam thank you

sonicdacrack · Aug 20, 2015

Is there a was to add Picons for the Streams for AFN? Would look alot nicer in my channel list ;-)

If So, does someone have them ^^

edyy96 · Aug 21, 2015

1.20-unstable_svn Build: r10954 Compiler: mipsel-openpli40-linux-gnu-ssl-libusb-pcsc does not include emu? not Stream Relay ?

cupof · Aug 21, 2015

sonicdacrack said:
Is there a was to add Picons for the Streams for AFN? Would look alot nicer in my channel list ;-)

If So, does someone have them ^^

make them

Code:

http://www.lyngsat-logo.com/logo/tv/aa/afn_family.png
http://www.lyngsat-logo.com/logo/tv/aa/afn_movie.png
http://www.lyngsat-logo.com/logo/tv/aa/afn_news.png
http://www.lyngsat-logo.com/logo/tv/aa/afn_prime_atlantic.png
http://www.lyngsat-logo.com/logo/tv/aa/afn_prime_pacific.png
http://www.lyngsat-logo.com/logo/tv/aa/afn_spectrum.png
http://www.lyngsat-logo.com/logo/tv/aa/afn_sports_us.png
http://www.lyngsat-logo.com/logo/tv/aa/afn_guide.png

dydyer · Aug 28, 2015

Hello, can someone we patch this version of oscam with PowerVu .... thank you to all the friends ....
oscam_1.20-rev-10961-Pli-4.0

Method of Opening PowerVu Channels in Enigma2 Using Oscam

DeepImpact

satmafia

Member

DeepImpact

kingcarlos

satmafia

Member

saty

Senior Member

proce563

ahmedmoselhi

enrico1

satmafia

Member

bojo59

joeuser

Senior Member

edyy96

g_sahota

Registered

boyet05

Senior Member

zsbgay

sonicdacrack

Registered

edyy96

cupof

Senior Member

dydyer

Banned