Meoboot seems to work with BH 1.7.2

[wolfen]

Meoboot seems to work with BH 1.7.2.. but there are only usb images out.. aaf and sif looks great now but are only in usb mode and not nfi.. any tricks ?
Latest Vix work great/best for me and i wanted to install it on usb but dual boot is'nt possible anymore or ?

 

[Ferret]

You can use this nfi convertor, not tried it on the latest images but it did work.

how to convert an image to

the 3 usb file an image of vuduo

root_cfe_auto.jffs2 root.jffs2
boot_cfe_auto.jffs2
kernel_cfe_auto.bi

in

"/ hdd / nfi"

and executed the script with the remote

and the file "image.nfi" will be in


"/ media / usb / MbootUpload"

image.nfi then changed the name as you wish.

Warning this scrypt to use that to install an image in multiboot **** Download <<

 

[alibecks]

From Black Hole 1.7.0,

you have to use images in USB.zip format.

Images in nfi format can't be used anymore with MeoBoot​

you do not need nfi format you can install from zip file only upload zip file to / media / usb / MbootUpload and then into MeoBoot panel you have to select Install Image (red button).

 

[ricki]

From Black Hole 1.7.0,

you have to use images in USB.zip format.

Images in nfi format can't be used anymore with MeoBoot​

you do not need nfi format you can install from zip file only upload zip file to / media / usb / MbootUpload and then into MeoBoot panel you have to select Install Image (red button).

After select red button, how long should I wait more then 10 min.

 

[alibecks]

only take a few minutes until the procedure will be complete and your Vu+ Duo will be autamatically reboot.if you use swap file on your usb deactivate than use meoboot

 

[wolfen]

Ahh.. Thnx.. finally i'm back on tracks again i will test this later today..