List of problems, questions with cuberevo mini (900HD) kindly assist.

[HardDisk]

I'm hoping to get answers from experienced people running or have extensive knowledge of the cuberevo. Thanks in advance.


Currently running Sifteam Extreme Edition 1.0 (Enigma2 0.9.7)
USB PKT 0.6 (Enigma2 0.9.6) the issues are shared between both images.

1) After adding url2 to be able to install EMU's any incubuscamd version "crashes" the EMU Manager, it runs but doesn't show up in menu to be able to start/stop it.

2) When adding vhannibal or any E2 settings via dreamset/dreambox edit, it always shows write errors. I'm sure the settings are correct in choosing enigma 2.4 and passive and password/username when I do a test it all works fine, I can transfer via ubuntu linux to enigma2/tuxbox folders but not through windows could this be a flash memory error/glitch?

3) If I download vhannibal motor settings and upload to box and restart I can SEE favourites but All/Satellites/Provider does not show, I have to do a manual scan again for the channels to show up in bouquets.


Please help me understand these problems as I don't want to have made the mistake of buying this box, I'v had it over a year, but I'm always having problems like this all the time.

To be honest I'm not willing to go to DGS image as a solution. If there is something I'm doing wrong, please let me know.

Thanks.

 

[hr1938]

Url2 is for E1 and does not work in E2 instead in extereme edition you should add src/gz extra http://jjikkm.webege.com[/U] in new line in etc/ipkg official feed, then press blue key, addons, instal or remove addons emucam will appear then you can instal emu and run it through blue key, emu.
i transfer all chanels to both images you mentioned by DS227 very easy you need check your ip to be corect. if you activate the defalt list in instalation you need to scan some channels then try.
you need to reboot GUI after transfer.

 

[HardDisk]

@hr1938, url2 actually is for Enigma2 because i opened the file and it has the link you posted

This issue is that it can see the ip address, it tells me "OK" on all the lines so im sure its picking it out right, the issue is when it comes to writing back to the flash i get errors. im using DS230 btw latest version as always.

Still same issues.

BTW everything you said I know already how to do I've programmed Dreamboxes before, I'm just having issues with the cuberevo mini with the incubuscamd crashing all the time regardless of version doesnt show up on emumananger after it loads. Thanks for your help, but you still didn't get me past the issues I've been asking about.

 

[hr1938]

hve mini for one year now i tried most of the images and i have 5 E2 images on Extreme on flash and 4 on usb, among them i found AAF V2 and ACT E2 close to full and no crash at all, i don,t now if you triedthese two image if not is not bad if try.
in extereme edition i have no problem with mgcamd but incubuse1.16 works but with problem there is noting in emu panel, i also got problem for transfering channels when i install the extreme image but solved by scaning of one corresponder.
to be honnest i am not fun of E1 at all

 

[HardDisk]

I'll try AAF and ACT, btw Sifteam Extreme Edition is E2 NOT E1

but thanks for the scanning part, yea thats the only solution I found so far.

 

[HardDisk]

this is what I keep getting. even if all settings are correct.

 

[hr1938]

this is what I keep getting. even if all settings are correct.

yes of course extreme is E2, i never said that it is E1 and i do not use E1 images.

can you check if you have enough space on your flash. because the software works till step that need room for transfer.
you may know that you can make some space with deleting some of your PO and countries in user/share/ enigma2 i always delet all of them except En from my image on flash.

 

[djheaven]

And one more thing .. Enigma2 is too bad to have in flash .. Add enigma2 on usb, and you will not have problems .. Enigma2 require much space, and it is far too little memory in the box ..

 

[Philphil]

Setup Dreamset as follows mate to get the transfer to work.


Incidentally great E2 image but does anyone know how to download emus with it?

 

[HardDisk]

Setup Dreamset as follows mate to get the transfer to work.


Incidentally great E2 image but does anyone know how to download emus with it?

in my case I have to use passive ftp.

in the case of getting emus yea use this and you can download it via the addons menu automatically. http://www.sat-universe.com/showthread.php?t=157847&highlight=sifteam+extreme+url2

 

[HardDisk]

And one more thing .. Enigma2 is too bad to have in flash .. Add enigma2 on usb, and you will not have problems .. Enigma2 require much space, and it is far too little memory in the box ..

that could be a good point, even though sifteam extreme edition has both flash/usb versions. I will try to use the sifteam image on USB and see if it works, if it does that def will tell me the flash has an issue.

Also I do delete the po files to free up space and I don't use any plugins whatsoever I just like the E2 because i can use customized settings like vhannibal motor settings to upload to my box and it's all automatically categorized.

 

[hr1938]

this is what I keep getting. even if all settings are correct.

i did try DS230 and got experiace your problem for transfering channels, but iot idone in 10 seconed with my old version DS227.
i had and have Extreme edition on my flash without problem and solve the spacing by deleting PO and countries from image.

 

[djheaven]

that could be a good point, even though sifteam extreme edition has both flash/usb versions. I will try to use the sifteam image on USB and see if it works, if it does that def will tell me the flash has an issue.

Also I do delete the po files to free up space and I don't use any plugins whatsoever I just like the E2 because i can use customized settings like vhannibal motor settings to upload to my box and it's all automatically categorized.

One of the problems with ipbox is in flash memory. It is too bad to enigma2. When enigma2 not intended for ipbox really ..

When it comes sifteam img, they are one of the ones I do not like. Img is too large, contains too much nonsense ..And they dont suport emu on fly.(Emu in the download meu) You have to have a extra url. WFT is that

The img should contain the least possible, but should have access to a good plugin menu. Found in PKTs img,. and ACT img

 

[HardDisk]

One of the problems with ipbox is in flash memory. It is too bad to enigma2. When enigma2 not intended for ipbox really ..

When it comes sifteam img, they are one of the ones I do not like. Img is too large, contains too much nonsense ..And they dont suport emu on fly.(Emu in the download meu) You have to have a extra url. WFT is that

The img should contain the least possible, but should have access to a good plugin menu. Found in PKTs img,. and ACT img

I think you're right about ipbox not meant for E2, that could be a major issue.