Begin at first ....
Plugin is still in its infancy and will be further improved. It's going to firstonce principle, if it works.
It can currently only:
- View all Picon, or Picon half-height above or below
- Program name, program name display, time
- All free in size and position adjustable
- Brightness On and Standby
- Clock in standby
- Refresh setting is not implemented yet
FAQ:
- Lcd4linux-Demon starts with the Enigma and start waiting for the BSOH mode of the LCD display. The LCD will be later on / connected, the Demon in the plugin (restart) enabled.
Alternatively, the Telnet with start / stop
/ etc/init.d/ldc4linux start
/ etc/init.d/ldc4linux stop
- Choose a path change in the plugin config with "OK" button to
installation
Prerequisite is that the Pearl screen is hacked. To use this thread as a starting point: external color display USB on all boxes with USB for € 2.90 excl. shipping
However, installing these "foreign" Libs is not without its dangers. So better to hold back. Images in which it works well to show the experience. It should not be too old images!
Download all files and copy on the box to / tmp. Then install in this order:
Times as you read it like that, maybe start with
opkg update
and also the actual plug-in:
Failed to open plugin (or at point 3)
No PIL Module Names
- Download and install: opkg install / tmp/python-imaging_1.1.6-ml1_mipsel.ipk
No module named textwrap
- Download and install: opkg install / tmp/python-textutils_2.6.7-ml8.2_mipsel.ipk
History:
0.0-r1: better restart function
By joergm6
Plugin is still in its infancy and will be further improved. It's going to firstonce principle, if it works.
It can currently only:
- View all Picon, or Picon half-height above or below
- Program name, program name display, time
- All free in size and position adjustable
- Brightness On and Standby
- Clock in standby
- Refresh setting is not implemented yet
FAQ:
- Lcd4linux-Demon starts with the Enigma and start waiting for the BSOH mode of the LCD display. The LCD will be later on / connected, the Demon in the plugin (restart) enabled.
Alternatively, the Telnet with start / stop
/ etc/init.d/ldc4linux start
/ etc/init.d/ldc4linux stop
- Choose a path change in the plugin config with "OK" button to
installation
Prerequisite is that the Pearl screen is hacked. To use this thread as a starting point: external color display USB on all boxes with USB for € 2.90 excl. shipping
However, installing these "foreign" Libs is not without its dangers. So better to hold back. Images in which it works well to show the experience. It should not be too old images!
Download all files and copy on the box to / tmp. Then install in this order:
Times as you read it like that, maybe start with
opkg update
Code:
opkg install /tmp/libusb-1.0-0_1.0.4-r0_mipsel.ipk
opkg install /tmp/libusb-0.1-4_0.1.2-r0_mipsel.ipk
opkg install python-codecs python-datetime python-imaging python-textutils
opkg install /tmp/libc6_2.12-r21.8_svnr12323_mipsel.ipk
opkg install /tmp/libjpeg8_8c-r1_mipsel.ipk
opkg install /tmp/libfreetype6_2.4.3-r1_mipsel.ipk
opkg install /tmp/libpng15-15_1.5.5-r3.1_mipsel.ipk
opkg install /tmp/gd_2.0.35_2.0.36rc1-r4_mipsel.ipk
and also the actual plug-in:
Code:
opkg install /tmp/enigma2-plugin-extensions-lcd4linux_0.0-r1_mipsel.ipk
Failed to open plugin (or at point 3)
No PIL Module Names
- Download and install: opkg install / tmp/python-imaging_1.1.6-ml1_mipsel.ipk
No module named textwrap
- Download and install: opkg install / tmp/python-textutils_2.6.7-ml8.2_mipsel.ipk
History:
0.0-r1: better restart function
By joergm6
Last edited: