14xx-Magic-1.17_6000ch.zip
15xx-Magic-1.17_6000ch.zip
16xx-Magic-1.17_ch6000.zip
-Novedades-
-----------------------------------------
En Antenas:
- Reducción de los parámetros necesarios en la configuración de antenas: Alimentación, OL y Tono 22 KHz ahora son automáticos.
- Mejora en la fluidez de las selecciones y detección de señal de antenas.
- actualización de parámetros predefinidos en algunas antenas: 19.2E, 1W, 5W, 8W, 12.5W
1) Cancel EEPROM
2) Submit the Fw
3) On the 1st boot wait a beep> display> Load> 666> Done - beep
4) The decoder is ready with a list of 666 loaded by default.
DO NOT SUBMIT> CODE
New feature> Save As Save As List 1 & List 2
Any list can be stored in memory as> or List 1> List 2.
To access:
> People> 7 (Service card)> B (Save As List 1) or> C (Save As List 2)
Two beeps indicate the beginning and end of the rescue.
From this moment the list is always available with:
> People> B (List 1) or> People C> (List 2)
And 'possible at any time override both List 1 and List 2 with any other
list in memory, even if from tuner (no need to reboot)
The channels will be stored with the Pid selected when you saved.
It 'can send a list and save it as> List 1 and then a second list
(Even without closing Mediasat connect) and save it as> List 2
(Or vice versa, it is not necessary to follow the 'order 1 - 2)
For example, you can perform a full scan at 13 degrees east and save it as a List,
perform other scan and save as overwrite List 1 or List 2, etc.. etc..
In this way we can manage 6000 memory channels
4000 of which are easily replaceable, and always as we please,
Defiant with the understanding that you can also replace the> 666 List with what we think.
If wrongly charged an empty list (not existing because not saved)
just repeat the 'operation with an existing list or the List 666)
executable operation at any time.
and if you want to hear a beautiful piece of music ..... go to firmware version!
1) Cancellare Eeprom
2) Inviare il Fw
3) Al 1°avvio attendere un beep > sul display > Load > 666 > done - beep
4) Il decoder è pronto con la lista 666 di default caricata.
NON INVIARE > CODE ____ è già a bordo
Funzione > Save As List 1 & Save As List 2
Qualsiasi lista presente in memoria può essere memorizzata come >List 1 o >List 2.
Per accedere:
>Pers >7 (Service card) > B (Save As List 1) oppure > C (Save As List 2)
Due beep segnalano l'inizio e la fine del salvataggio.
Da questo momento la lista sarà sempre disponibile con:
> Pers > B (List 1) oppure > Pers C > (List 2)
E' possibile in ogni momento sovrascrivere sia List 1 che List 2 con qualsiasi altra
lista presente in memoria, anche se proveniente da sintonizzazione (non serve il riavvio)
I canali saranno memorizzati con il Pid selezionato al momento del salvataggio.
E' possibile inviare una lista e salvarla come >List 1 e subito dopo una seconda lista
(anche senza chiudere Mediasat connect) e salvarla come >List 2
(o viceversa, non è necessario seguire l' ordine 1 - 2)
Ad esempio, Si potrà effettuare una scansione completa a 13° est e salvarla come List 1,
eseguire altre scansioni e salvarle come List 2 o sovrascrivere List 1 etc. etc.
In questo modo abbiamo la possibilità di gestire in memoria 6000 canali,
4000 dei quali facilmente e sempre sostituibili a nostro piacimento,
fermo restando che con Defiant è possibile sostituire anche la > 666 List con ciò che ci pare.
Se erroneamente si carica una lista vuota (non esistente perchè non salvata),
è sufficiente ripetere l' operazione con una lista esistente oppure con la 666 List),
operazione eseguibile in qualsiasi momento.
Cancellando la flash 512k si tornerà alle condizioni iniziali.
Buon divertimento.
Grazie al Team AndrySat