Method for resuscitation bad flash
Method of resuscitation in the running aground installation image E2 If you damage the image down to the impossibility of writing method pressing the Menu button boot procedure is the following:
1. First you need a null modem serial cable
2. emergency_ub - Linux rescue for receiver Kathrein ufs-910 open archive and put the tabs at the computer;
3. HyperTerminal (WIN XP Accesories-Comunications Hyperterminal) give a session name, choose COM1, choose the speed and 115,200 "Flow control" to "none". You will have the display window of serial communication BOX <-> PC (the Vista download Tera Term).
4. prepare a memory stick, formatted with the \ Kathrein \ ufs910 director who put in the archive file 6: Notfallimage 1.5, and insert it in the USB connector on front panel of the device.
ATTENTION! To make sure your stick is recognized by the receiver, it is preferred that it be formatted with the HP USB Disk Storage Format
Then follow these steps:
- Start up the network switch (rear);
- ENTER soon as you appear in the message window Hyperterminalului boot Linux ... if you could first resumed);
- You will get kernel Teleprompter BST 7100 Ref-> now must enter:
loadb a4000000, then ENTER;
- Prompter in the kernel # # Ready for binary (Kermit) download to 0xA4000000 at 115200 bps ...
- In Hyperterminal right click on SEND file, choose the protocol and the Kermit Browse to download the file filename Emergency.ub, then Send you when the transfer begins in the PC receptor (takes about 9-10 min);
- After having been transferred fisirelele type: bootm a4000000, then ENTER
- At this moment the kernel starts rescue and identify the Stick and start the update of the classic procedure.
- The prompter must appear the following:
1th Erasing 21
1th Erasing 22
1th Erasing 23
1th Erasing 25
1th Erasing 26
...
...
1th Erasing 95
1th Erasing 96
1th Erasing 97
1th Erasing 98
1th Writing 0
Remained = 5095424
1th Writing 0
1th Writing 0
1th Writing 1
1th Writing 1
1th Writing 2
1th Writing 3
1th Writing 3
...
...
...
1th Writing 96
1th Writing 97
1th Writing 97
1th Writing 98
1th Writing 99
1th Writing 99
2th Erasing 0
2th Erasing 5
2th Erasing 11
2th Erasing 16
2th Erasing 22
2th Erasing 27
2th Erasing 33
2th Erasing 38
2th Erasing 44
2th Erasing 50
2th Erasing 55
2th Erasing 61
2th Erasing 66
2th Erasing 72
2th Erasing 77
2th Erasing 83
2th Erasing 88
2th Erasing 94
2th Writing 0
Remained = 1179648
2th Writing 0
2th Writing 2
2th Writing 5
2th Writing 8
....
2th Writing 11
2th Writing 94
2th Writing 97
3th Erasing 0
3th Erasing 2
3th Erasing 5
3th Erasing 8
3th Erasing 11
3th Erasing 13
3th Erasing 16
3th Erasing 19
3th Erasing 22
3th Erasing 25
...
...
3th Erasing 86
....
etc.
etc.
.....
ebooting
Rebooting
- On each may be other self-images
eg AAF 2.0e
- Another procedure is TFTP (this procedure is simply not give 100% odds)
1. The FTP natively under Linux on Kathrein 910 contains TFTP (Trivial FTP) which allows the transfer interface enternet dispre PC to a receiver file Emergency.ub
2. TFTP transfer from PC to receiver are between TFTP (Linux on the box) and a server (TFTPD32) which is installed and running on your PC.
3. ATTENTION! You have to simultaneously connect the phone and PC using a null-modem cable and an ethernet cable.
4. To start the operation you need the following programs:
- TFTPD32 the TFTP server (
http://tftpd32.jounin.net/) you install into a directory, the directory on the fixed interface (browse) Settnigs get in, keep only the function TFTP Server (Global Settings), check "Use IP on this interface and choose from the drop-list IP PC, you then Apply and OK and restart the program.
