I have a Vu+Solo2 with PLi and Oscam. I can't get the internal reader to read from my Viasat-card (CAID 090F). It can not avtivate the card.
card detected
ATR: 00 00
ERROR: Could not read reader->convention
Error activating card.
My Oscam.user has
[reader]
label = upper_card_Viasat
enable = 1
protocol = internal
device = /dev/sci1
caid = 090F
detect = cd
mhz = 375
cardmhz = 375
group = 1
emmcache = 1,3,15,0
blockemm-unknown = 1
dropbadcws = 1
ratelimitecm = 4
ratelimittime = 9000
ecmunique = 1
srvidholdtime = 2000
cooldown = 30,600
OR should I get a Smartreader and plug in the front USB ?
I suppose the protocol will be "smargo" or "smartreader". I have one in mind, a Smartreader+ V2.
How do I adress the USB on the front?
Or maybe I must install driver on the box?
Brg
Idefixer
card detected
ATR: 00 00
ERROR: Could not read reader->convention
Error activating card.
My Oscam.user has
[reader]
label = upper_card_Viasat
enable = 1
protocol = internal
device = /dev/sci1
caid = 090F
detect = cd
mhz = 375
cardmhz = 375
group = 1
emmcache = 1,3,15,0
blockemm-unknown = 1
dropbadcws = 1
ratelimitecm = 4
ratelimittime = 9000
ecmunique = 1
srvidholdtime = 2000
cooldown = 30,600
OR should I get a Smartreader and plug in the front USB ?
I suppose the protocol will be "smargo" or "smartreader". I have one in mind, a Smartreader+ V2.
How do I adress the USB on the front?
Or maybe I must install driver on the box?
Brg
Idefixer