Install multiple LNB's

[Gammal Gubbe]

I have one dish pointed at 27.5W and I'd like to receive 24.5W & 30.0W aswell so I tried mount them next to eachother. But it seems very difficult to get signals on the side LNB's... is it difficult to do this when the satellites are so near eachother?

Dish size is 100 cm. I get very strong signal on 30.0W if I use centre LNB (and move dish) but I want the centre LNB to receive 27.5W instead.

 

[Gammal Gubbe]

The three satellites I try to receive with one dish are located 2 - 2,5 degrees from eachother. Which means I can't use normal standard LNB's - I have to use special narrow LNB's. Then it works. Problem solved. :thum:

 

[anix000]

from expierence, when y have lnb far from dish center, signal goes down. wery hard combine 28E with 13E, to get best signal on all fr, on 28E ar meny fr what it selfs are wery low
ps
it self 27W have poor signal, to get normal signal i use 93 cm dish, i tested with 89cm, signal was 3-4 level, with 93cm -5/6 level
to get normal signal level on 24w/27w/30w i use smal lnbs, Alps Universal Single LNB and for 24w Inverto lnb
conbination works ok only 30W hard combine near to 27W, 24 W is perfect.
how strong signal you have on 24w/27w/30w?