How to Update DM800HD clone with e-star SIM installed to the latest released official firmware (Release 3.0.3 from 16.12.2010) as of the date created of this document.
Here How I’m did it.
1. Get The Firmware (currently supported as of 15/4/2011 is official release-dm800-3.0.3.nfi dated Dec 16, 2010) later version with driver version from march 2011 still not work with e-ster SIM, download it from //dreamboxupdate.com/
2. Convert the downloaded image with s-star's DreamConverter.exe V.3.1.0.0 download it from e-star-sim.com
3. Shutdown the DM800 Box from OSD Menu after the message safe to unplug, Unplug the box then wait 2 - 3 minutes to make sure that the capacitors are totally discharged. ( this may not necessary but mine having problem entering the firmware upgrade web interface if do it immediately after unplug)
4. Hold down the standby button on the box while plug in the power, continue hold down the button until the OLED display show stop message and it's IP Address
5. Open web browser (prefer Firefox but IE also work) point the browser to the IP address shown on the OLED screen
6. Click on the firmware upgrade link then click browse and browse to the converted image then click flash, wait until the browser show message 100% finished then click reboot button on the browser.
After the reboot perform the initial setup according to the wizard. BLUE Panel will not present in this image it need to perform the installation as followed
1. Download Gemini Wizard from the following link download.blue-panel.com/gemini3/g3_wizard
2. Use DCC to put the file to / on the DM800
3. Install it from Menu -> Settings -> Software -> local Extensions... -> InternalFlash -> Install -> green button
4. restart the GUI the install GeminiPlugin Blue -> Gemini3Wizard -> Install-GeminiPlugin
After finished the GP3 plugin will be installed but still can not install soft-cam because soft-cams are official banned in Gemini project, to enable soft-cam perform the following steps
1. down load file OneStep_GP3_Cam_Feed.rar from onestep.cc/wbb2/jgs_db.php?action=download&download_id=3142then unpack it
2. use DCC to put the file gp-cam-feed_0.3_mipsel.ipk to / on the DM800
3. Install it from Menu -> Settings -> Software -> local Extensions... -> InternalFlash -> Install -> green button
4. restart the GUI, the next thing is install selected cam from the bluepanel add-on installation.
**** Addiional WIFI Driver Installation ****
The official image include RT73 WiFi Adapter's Driver but can not use other USB WIFI Dongle. but I got an ASUS USB N10 (see the review in the following url: reviews.cnet.com/adapters-nics/asus-usb-n10-network/4505-3380_7-33948160.html[/url]) this is a small usb wifi 802.11n with 150 Mbps and low price as well. you need the driver to install on the new image I'll post how I'm install the driver for this usb wifi in the next post
Here How I’m did it.
1. Get The Firmware (currently supported as of 15/4/2011 is official release-dm800-3.0.3.nfi dated Dec 16, 2010) later version with driver version from march 2011 still not work with e-ster SIM, download it from //dreamboxupdate.com/
2. Convert the downloaded image with s-star's DreamConverter.exe V.3.1.0.0 download it from e-star-sim.com
3. Shutdown the DM800 Box from OSD Menu after the message safe to unplug, Unplug the box then wait 2 - 3 minutes to make sure that the capacitors are totally discharged. ( this may not necessary but mine having problem entering the firmware upgrade web interface if do it immediately after unplug)
4. Hold down the standby button on the box while plug in the power, continue hold down the button until the OLED display show stop message and it's IP Address
5. Open web browser (prefer Firefox but IE also work) point the browser to the IP address shown on the OLED screen
6. Click on the firmware upgrade link then click browse and browse to the converted image then click flash, wait until the browser show message 100% finished then click reboot button on the browser.
After the reboot perform the initial setup according to the wizard. BLUE Panel will not present in this image it need to perform the installation as followed
1. Download Gemini Wizard from the following link download.blue-panel.com/gemini3/g3_wizard
2. Use DCC to put the file to / on the DM800
3. Install it from Menu -> Settings -> Software -> local Extensions... -> InternalFlash -> Install -> green button
4. restart the GUI the install GeminiPlugin Blue -> Gemini3Wizard -> Install-GeminiPlugin
After finished the GP3 plugin will be installed but still can not install soft-cam because soft-cams are official banned in Gemini project, to enable soft-cam perform the following steps
1. down load file OneStep_GP3_Cam_Feed.rar from onestep.cc/wbb2/jgs_db.php?action=download&download_id=3142then unpack it
2. use DCC to put the file gp-cam-feed_0.3_mipsel.ipk to / on the DM800
3. Install it from Menu -> Settings -> Software -> local Extensions... -> InternalFlash -> Install -> green button
4. restart the GUI, the next thing is install selected cam from the bluepanel add-on installation.
**** Addiional WIFI Driver Installation ****
The official image include RT73 WiFi Adapter's Driver but can not use other USB WIFI Dongle. but I got an ASUS USB N10 (see the review in the following url: reviews.cnet.com/adapters-nics/asus-usb-n10-network/4505-3380_7-33948160.html[/url]) this is a small usb wifi 802.11n with 150 Mbps and low price as well. you need the driver to install on the new image I'll post how I'm install the driver for this usb wifi in the next post
Last edited by a moderator: