Created Iscan&Nikolasy
http://ipbox900.dyndns.tv/release/in...uberevo/INDB7/
Flash only
ST24-207 only
900\910\91\100
9000\9500 after test
Maybe letter ST23-113
Image created only from flash
This latest version will be released for the 9x series of tuners.
In connection with the termination of the support of the AAF and Tideglo we see no interest in the future development of the firmware.
This is our last gift to the users 900 \ 910 \ 9000 \ 91 \ 100 \ 9500 models
Perhaps the development of the firmware will be extended to other tuners, such as Wu + or Clark
Tested 900-ok
Tested 910-ok
Tested 91hd-ok
Tested 100hd-ok
Not Tested 9000
Not Tested 9500
Attention - all parameter settings in bluepanel
1- swap file must present in you hdd or usb
2- hdd\usb not enable automaticly before you not set all parameters
After 1 start you must do next step
1- Go to Bluepanel->Swap Manager and set all parameters in settings menu
2- After set hdd\usb configuration (swap, partition,Rec folder,etc ) press "SAVE KEYS"
3- After "Save" press "Run Settings Keys"
4- Press "Test Key" from looking created parameters
5- Set you like screens parameters in BluePanel -Settings-ScreensConfiguration
-Circle Volume indicator,
-Rec inbobar,
-Analog or digital clock,
-QuickEpg,
-Fool or Little EMUbar and BluePanel
-Infobar type
-Led Indicatore Type
-Third infobar
-other screen parameters
5- Install only one emu (free mem in image must be >2000kb)
if you wont install other emu- delete first before
( emu have defoult settings. Ask you shareprovider about work settings for you emulator)
http://ipbox900.dyndns.tv/release/in...uberevo/INDB7/
Flash only
ST24-207 only
900\910\91\100
9000\9500 after test
Maybe letter ST23-113
Image created only from flash
This latest version will be released for the 9x series of tuners.
In connection with the termination of the support of the AAF and Tideglo we see no interest in the future development of the firmware.
This is our last gift to the users 900 \ 910 \ 9000 \ 91 \ 100 \ 9500 models
Perhaps the development of the firmware will be extended to other tuners, such as Wu + or Clark
Tested 900-ok
Tested 910-ok
Tested 91hd-ok
Tested 100hd-ok
Not Tested 9000
Not Tested 9500
Attention - all parameter settings in bluepanel
1- swap file must present in you hdd or usb
2- hdd\usb not enable automaticly before you not set all parameters
After 1 start you must do next step
1- Go to Bluepanel->Swap Manager and set all parameters in settings menu
2- After set hdd\usb configuration (swap, partition,Rec folder,etc ) press "SAVE KEYS"
3- After "Save" press "Run Settings Keys"
4- Press "Test Key" from looking created parameters
5- Set you like screens parameters in BluePanel -Settings-ScreensConfiguration
-Circle Volume indicator,
-Rec inbobar,
-Analog or digital clock,
-QuickEpg,
-Fool or Little EMUbar and BluePanel
-Infobar type
-Led Indicatore Type
-Third infobar
-other screen parameters
5- Install only one emu (free mem in image must be >2000kb)
if you wont install other emu- delete first before
( emu have defoult settings. Ask you shareprovider about work settings for you emulator)