humax 5410z

[bling121]

so are you saying the i have to change my humax id form 0130.0600 to 16.06 sorry kinda lost

 

[mogembo]

you have to change everything , loader , system id and firmware if u want to load TOH firmware then u have to change , without changing loader and system id u can not load TOH firmware
in simple word if u want to make ur humax5410 to humax5400 then u have to change
if u r only after gold and silver card then forget it to change loader or system id just keep it like that, only search how to upgrade and program ur silver card and gold card

 

[Petry]

Again for all, it is not necessary to upload Loader H2.08 to patch a receiver. There is hardware configuration with 4 different kinds of Loader for the 5400 or 5400Z.
This is in the list:
L1.3x (newest stand L1.37 )
H1.3x (newest stand H1.37 )
L2.0x (newest stand L2.08 )
H2.0x (newest stand H2.08 )

No one of these Loader is better or worse than the other and is not among each other exchangeable!!!
A Receiver with H1.37 Loader would be destroyed with a H2.08 Loader!!!
Also, a L1.37 Loader in a Receiver with H1.37 Loader doesn't work!!!
______________________________

Humax 5400:
Board OAK-I, Tuner MK2: (Loader: L1.3x, aktuell: ) Loader L1.37; System ID : 0016.0000
Board OAK-II, Tuner MK2: (Loader: L2.0x, aktuell: ) Loader L2.08; System ID : 0016.0200
Board OAK-I, Tuner MK3: (Loader H1.3x, aktuell: ) Loader H1.37; System ID : 0016.0400
Board OAK-II, Tuner MK3: (Loader H2.0x, aktuell: ) Loader H2.08; System ID : 0016.0600

Humax 5400 Z:
Board OAK-II, Tuner MK3: (Loader H2.0x, aktuell: ) Loader H2.08; System ID : 0016.0600

Humax 5400 Z+ (Humax 5400 Z Plus):
Board OAK-II, Tuner SD1278 LVA-3: Loader H2.08 oder H2.19; System-ID : 0016.0601

 

[mogembo]

bling121 has 5410z not humax5400z
5410z has only one card slot no CI
it has different loader and system id

 

[Petry]

_______________________

Humax 5410z:
ZIR 1.03.10 und System-ID 0103.0600 :

H / W II-L 2,0
S / W Azir 1.05.03
Device Driver Azir 1.05.03
S / W Letzte Up. 25. März 2002
Loader Version 5.15.12.16003
Sys ID 0103.0600
Aktuelle Service 7 Zentrale
??

 

[bling121]

im so lost now would u be able to put on here the files so i can do this please

 

[bling121]

but yea thats what ive got the humax ir_5410z

 

[mogembo]

first try to send HIC 10500-06 if showing error then loader H2.08 then system id then send HIC after that send again TOH firmware
HIC 10500-06 is original software from humax digital website
if its work fine then u win already if after that show nothing only blank screen or no light on front panel then its means ur humax died already

try at ur won risk if anything goes wrong please dont blame me
good luck friend

 

[bling121]

ok just tryed everything the box gets halfway loading it and than the box says e_id i dnt know what ta do

 

[mogembo]

i think u sending or loading firmware without changing system id thats why u got E-ID
first send system id
second hic10500-06 firmware (dont send loader coz it is already with original firmware)
if ur humax boot normally then scan channels if u cant then send channels setting with smart HNF tool
then send again latest but TOH HOT 11.5 firmware (u can find in firmware section)
then keybin (with KIAB key loader software)

 

[bling121]

what tools do i need for changing my humax box id ?
Thanks m8

 

[mogembo]

humax software loader

 

[bling121]

i used the software and chaned the id number to what my humax boxes id is than went n loaded it to my box than it came up saying e-ad

 

[mogembo]

after changing id did u send original firmware?
after changing id send hic10500-06 if says e-ad ( invalid address....humax made the HDF file with wrong address)
then send loader then again original firmware
then TOH firmware

 

[bling121]

yea just tryed it i done it again with out changin the id and get e_id on the humax box and than i went to change the id of them to 0130.0600 thats my humax box id and went to load it than keep on geting e_ad on the humax also just tryed it on the other humax 5410z and it dse the same thing. Do i dezed them or do someting to the main bord for this to work

 

[bling121]

its got me tolal screwed i dnt know what to do m8

 

[mogembo]

1- change system id (16.06)
2-change loader (H2.08)
3-load humax firmware
4-toh firmware
5-keybin

in some cases after changing system id and loader remote control or front panel stand by button wont work in this case use rare panel switch or direct switch on off
after changing system id and loader humax wont response then switch off humax from rare panel and send from pc original firmware when u see mesg waiting to connect humax then switch on humax
i attached some useful file with instruction read it and do it by urself it is from humax zone
use simple method only

 

[mogembo]

for me what i did b4 and how i change
1-i send loader H2.08
2-system id 16.06
3-then original firmware with wdn4oak loader ( officially for humax 5400)
4-toh firmware
5-keybin
still u getting error coz u change system id but loader still same for ur azir firmware (5410z)

 

[bling121]

nice ill give it a crack m8

 

[bling121]

hey m8 im onling