How to upgrade edision 2620 to a satycon for cardsharing

[manuel carvalho]

Hi!
I have a edision 2620CXCI and a hould like to clone it to a Satycon for try carsharing.
Anyone know how to do this?
Thanks in advance,
Manuel

 

[*Joker*]

you have to use the same tools as you use to update with original or ILTV firmware but you have to take a firmware named "fixed for Edision 2620CXCI"
i normaly use uptool

EMU aktivate: 6292
CS aktivate: 7312

in CS menue for newcamd:
Sharing Mode: GBOX Cardshare Network
Baud Rate: 115200
Press OK

use SST or wsp on PC and connect the Edision with 0-modemcable

 

[manuel carvalho]

Hi,
Do I have do upload a original firm or just the "fixed one"? I canot upload de original one.
Meanwhile I’ll put here some questions hoping that some gbox protocol expert can help.
I have 4 sats (Hispa, Astra, Hot e Intelsat) rightly configured in diseqc.
I can see with no problem all the free channels from all sats but with regard to the scrambled ones, from Hispasat I can’t open any (nor kaka nor D+) and from the other sats I can open several providers but the image doesn’t hold on for more than 15/20 seconds.
Questions:
1- FxTuner is deactivated; should it be? What is it for?
2- What does the message “CW in cache” mean?
3- Why do I get “Intruder Alert” messages?
4- What does the message “BAD” mean?
5- How many lines and how many cards should I have? Are there recommended minimum and maximum limits?
Many thanks for all your support,
Manuel

 

[*Joker*]

Hi,
Do I have do upload a original firm or just the "fixed one"? I canot upload de original one.

What firmware is on the Box and why you cannot flash another one?


Meanwhile I’ll put here some questions hoping that some gbox protocol expert can help.
I have 4 sats (Hispa, Astra, Hot e Intelsat) rightly configured in diseqc.
I can see with no problem all the free channels from all sats but with regard to the scrambled ones, from Hispasat I can’t open any (nor kaka nor D+) and from the other sats I can open several providers but the image doesn’t hold on for more than 15/20 seconds.
Questions:
1- FxTuner is deactivated; should it be? What is it for?

2- What does the message “CW in cache” mean?

when no new CW´s required, then the CW´s will be used from cache, it is faster

3- Why do I get “Intruder Alert” messages?

4- What does the message “BAD” mean?

Bad ecm´s i think

5- How many lines and how many cards should I have? Are there recommended minimum and maximum limits?
Many thanks for all your support,
Manuel[/QUOTE]

 

[manuel carvalho]

you have to use the same tools as you use to update with original or ILTV firmware but you have to take a firmware named "fixed for Edision 2620CXCI"
i normaly use uptool

EMU aktivate: 6292
CS aktivate: 7312

in CS menue for newcamd:
Sharing Mode: GBOX Cardshare Network
Baud Rate: 115200
Press OK

use SST or wsp on PC and connect the Edision with 0-modemcable

Hi,
I have any practice whit this issue.
I have already mbox0610 on my pc and i can open somme packages on somme satelites, but on Hispasat cant open nothing.
Should mbox0610 working alone or is necessary install SST or WSP on pc?
If so, can you tell me where can i get it?
Thanks in advance
Manuel

 

[*Joker*]

Dear manuel carvalho,

you ask the same questions as on sat666. There you got the answers from Тайна го and the link to manual from 666

 

[manuel carvalho]

But i steel dont know if i must install SSP once i have mbox working...
Sorry for my doubts
Manuel

 

[*Joker*]

i don´t use mbox, so i cannot give any answer