Farooq Noor
Registered
- Messages
- 2
How to update sw ?
1-Open the loader "Upgrade .exe " , select Bin file : V1.01.02_MICROBOX III.bin
Upgrade Mode is default " Normal 1->1
2-press "Next " ,then power on the doungle
3-It will update sw automaticlly ,till it show "Finished "
How to work this doungle ?
1-Connect RS232 cable between Doungle and Receiver
2-Turn on Doungle ,connect AV cable between doungle and TV ,the setup menu screen will be displayed as below
3-Pls select Satellite :W3 or Intelsat 1002 ,then press "SAVE" ,then exit .
Now the Signal light of doungle will show GREEN and blink .
4-Now connect AV cable between receiver and TV ,now you can active twin protocal of receiver ,then it will open pay channels.
1-Open the loader "Upgrade .exe " , select Bin file : V1.01.02_MICROBOX III.bin
Upgrade Mode is default " Normal 1->1
2-press "Next " ,then power on the doungle
3-It will update sw automaticlly ,till it show "Finished "
How to work this doungle ?
1-Connect RS232 cable between Doungle and Receiver
2-Turn on Doungle ,connect AV cable between doungle and TV ,the setup menu screen will be displayed as below
3-Pls select Satellite :W3 or Intelsat 1002 ,then press "SAVE" ,then exit .
Now the Signal light of doungle will show GREEN and blink .
4-Now connect AV cable between receiver and TV ,now you can active twin protocal of receiver ,then it will open pay channels.