How to update MICROBOX III sw ?

[Farooq Noor]

How to update sw ?


1-Open the loader "Upgrade .exe " , select Bin file : V1.01.02_MICROBOX III.bin
Upgrade Mode is default " Normal 1->1


2-press "Next " ,then power on the doungle

3-It will update sw automaticlly ,till it show "Finished "



How to work this doungle ?

1-Connect RS232 cable between Doungle and Receiver

2-Turn on Doungle ,connect AV cable between doungle and TV ,the setup menu screen will be displayed as below




3-Pls select Satellite :W3 or Intelsat 1002 ,then press "SAVE" ,then exit .

Now the Signal light of doungle will show GREEN and blink .

4-Now connect AV cable between receiver and TV ,now you can active twin protocal of receiver ,then it will open pay channels.

 

[talk2esua]

HOW TO GET THE SOFTWARE

The software is presently not available anywhere on the internet but you can be rest assured we have it. If you are interested in having this software free of charge simply subscribe to our posts (free) and send us an email requesting for the software with your DECODER MODEL & SMART CARD VERSION and the software will be emailed to you.

Subscribe by entering your email address on the feedburner form (under the blinking decoder on the site). Complete the process by going to your email to activate your subscription from the link on the feedburner email that will be sent to you.

Afterwards send an email to [email protected] or post a comment on the site requesting for the software.

NOTE: Smart Card Version is written on the SIM surface e.g Version 2, Version Zeta, etc.

Do ensure that your decoder is an ORIGINAL STRONG DECODER.