Sat Universe - The Place To Be
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
How to restore settings
- Thread starter ugnius
- Start date
Don't know why you'd bother with manually backing up and restoring when dreamset does such a great job.
zapit folder should hold everything related to settings other then satellites.xml file.
Although if I remember correctly I had to enter my usals values each time after upgrading firmware. But that wasn't a big deal to punch in few numbers.
zapit folder should hold everything related to settings other then satellites.xml file.
Although if I remember correctly I had to enter my usals values each time after upgrading firmware. But that wasn't a big deal to punch in few numbers.
Thanks. I did not try Deamset for that, but this issue I had only with last firmware change. Can't imagine why. It shouldn't be related.
Yes, it is easy to set by remote control if you have 4 ports DiSEqC for example. I have 3 switches and one of them has 10 port, so not easy to remember configuration after several months.
I had no choice like to recheck every cable and make documentation about LNBs connection.
But anyway it could be good to know which file keeps information about DiSEqC and LNBs configuration.
Yes, it is easy to set by remote control if you have 4 ports DiSEqC for example. I have 3 switches and one of them has 10 port, so not easy to remember configuration after several months.
I had no choice like to recheck every cable and make documentation about LNBs connection. But anyway it could be good to know which file keeps information about DiSEqC and LNBs configuration.