If you have problems maybe uploading the new EMU or whatever... All black? Sammy wants SW and from scratch, as it keeps giving you some numbers in the display, like 6-01 changing to 6-03 or so? Well, kill your Sammy at the back and then... Here's a copy of my post from other threads:
HyperTerminal explanations [thanx to Papagen!!]:When you switch it on [at the back] press the POWER and LEFT ARROW in the front of the receiver and it should go into Download mode.
Make sure you have it connected to a PC via a serial cable and your HyperTerminal prepared.
If it times-out - repeat the procedure until you get it right and in time, too [at the same time keeping your cool!!]!
Choose the EMU you want to upload. Then Settings list. Then RAM. Then CAID list.
Enjoy! Hopefully!
Uploading Software Into Samsung Using Hyper Terminal
Start/Program/Accessories/Communications/Hyper Terminal
Setting the Hyper Terminal
1. Start Hyper Terminal.
2. In the field "Name" write for example Samsung 9500, choose an icon and click OK.
3. In the new opened window, near "Connect using" choose "Direct to COM1, afterwards click OK.
Port Settings
1. Bits per second : 115200
2. Data Bit : 8
3. Parity : NONE
4. Stop Bit : 1
5. Flow Control : Hardware
Click OK
Uploading software into Hyper Terminal
1. Choose TRANSFER
2. Then choose SEND FILE ....
3. BROWSE - select from hard drive the desired version of software (e.g. DSR9500_Eurocam_5-1_EMU_vXX.bin)
4. Choose 1KXmodem for Protocol
Don't press the button "Send", you will do it subsequently.
After you have done the procedure described, connect your computer with Samsung using a RS232 connection cable.
Before you start uploading the new software into Samsung I would advise you to firstly remove all the cams or cards from it (if any are inside).
The things you have to do are :
1. Disconnect your Samsung using the switch on the rear.
2. In the front of Samsung keep pressed the "right arrow" (volume up).
3. Power up your Samsung on the rear switch and keep constantly pressed "right arrow" (volume up).
Keep the "arrow" pressed until the "3-01" appears on the display,
from that moment the computer will show "............................... Loading"
4. In that moment, in the Hyper Terminal, click the button "Send" (you have about 15 seconds to perform that operation).
With clicking on "Send" starts the uploading the software into Samsung.
Don't be hasty! Wait for entire process to terminate.
Process is terminated when on the Samsung a clock appears.
Afterwards insert some of the cards with Conax emulation without keys.
That was it.
If you have done all properly, there is a desired version of software in you Samsung.
The easiest way to verify if upload succeeded : Menu/System properties/System information.
Old versions of the EMU software has the version number 118 and new have 133.