What's new
Sat Universe - The Place To Be

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

How To Configure Diseqc 1x16 With Dm800

BM300

Super VIP

Here is an example:

Configuration Mode = advanced
Satellite = Hotbird 13E (change satellite name)
Voltage mode = Polarization
Tone mode = Band
LNB = LNB 1 ... 16 (change this)
DiSEqC mode = 1.1
Toneburst = None
Committed DiSEqC command = none
Fast DiSEqC = No
Sequence repeat = No
Command order = uncommited, commited, toneburst
Uncommitted DiSEqC command = Input 1 ... 16 (change this to be the same as LNB)
DiSEqC repeats = none
LOF = Universal LNB
Increased voltage = yes (if wire is long)
Polarity = Auto
Tone Amplitude = 800mV

 
Last edited:

private4587

Registered
Thanks for your quick reply, after i assign LNB 1 to port 1 do I then set the satellites as above? sorry for all questions but cannot get my head around switches.
 

BM300

Super VIP
Thanks for your quick reply, after i assign LNB 1 to port 1 do I then set the satellites as above? sorry for all questions but cannot get my head around switches.

You can then assign as many satellites as ypu want to LNB1
Make sure that Diseq is set as 1.2 for this port only
The rest are set as 1.1​
 
Top