Manual Firmware Install a USB & channel list
Firmware update via USB
1) Insert the firmware downloaded to the root of a USB stick formatted as FAT32 and put it in the usb slot receiver.
2) Press MENU, the remote control
3) Select Upgrade by USB
4) of the options that lets you select All + Bootloader
5) Start
6) Remove the USB stick receiver
With this option you lose everything you have installed, channel lists, servers, etc. complete the firmware installed, this is good when you boot up the deco
The receiver will reload the new firmware and when finished he just reboot and you just have to get the usb pen and ready to enjoy
Installing channel list
1) Insert the settings in a USB pen
2) Menu
3) Upgrade by USB
4) userdb
5) Start
With this you just insert the new channel list does not change the firmware
The decoder is restarted after the configuration update automatically with new updates.
Firmware update only
1) Insert the firmware downloaded to the root of a USB stick formatted as FAT32 and put it in the usb slot receiver.
2) Press MENU, the remote control
3) Select Upgrade by USB
4) of the options that lets you select maincode
5) Start
6) Remove the USB stick receiver
This only updates the firmware does not erase the channel list
The decoder is restarted after the configuration update automatically with new updates
saludos elgeneral