Help with Ferrari Dream-Elite-3.0-dm800

[blidafarid]

Hello, the Ferrari-SSL87F-Dream-Elite-3.0-dm800-rev009r02_02-02-2012 image don't work for me.
i have DM800 PVR, i got a good signal in channels but after 5 seconds a got message that no synchronisation.
Help please.

 

[dreamtop]

you have pluging problem.

try to go for new imge update

 

[blidafarid]

i found the problem, this image is for 800 se, the mine is 800.

 

[Ferret]

I take it your using it in Barry Allen then ? If so you may need to put the image in the flash.

If this was a se image you would not be able to install it in the flash so it can not be for SE

 

[blidafarid]

thanks, now i installed the version 008 for DM800, it is ok, but when i activate the usb dtt i loose the satellite image.
Do you know how i can resolve it ?
my usb is Kworld 399u doble tuner.

 

[Ferret]

Menu-setup-service searching-tuner config

You must have 2 tuners there tuner A is for satellite try reconfiguring it !

 

[pietro44]

resolve?

 

[plachta]

I tried in the "B.A" And I wanted install de-3.0 ssl87f and nothing.

 

[karel00]

I have 800 se with ssl82f, please howto update to Ferrari-SSL87F-Dream-Elite-3.0-dm800-rev009r02_02-02-2012
I already ones messed up, so i dont dare to without good explanation.
Please HELP

 

[Ferret]

I have 800 se with ssl82f, please howto update to Ferrari-SSL87F-Dream-Elite-3.0-dm800-rev009r02_02-02-2012
I already ones messed up, so i dont dare to without good explanation.
Please HELP

That is a prepatched image so all you have to do is flash it via browser.

 

[karel00]

@Ferret,
I have tright to, however i get report like this,
INVALID IMAGE (OR OLD VERSION)
switch off the new box, wait for 10 seconds start box and get icvs image back on it.
when startup box says its ferrari 82 ???

 

[cdr]

@Ferret,
I have tright to, however i get report like this,
INVALID IMAGE (OR OLD VERSION)
switch off the new box, wait for 10 seconds start box and get icvs image back on it.
when startup box says its ferrari 82 ???

is give you error INVALID IMAGE (OR OLD VERSION)
because in your box you got a old ssl

by webbrowser first upload the SSL87F NFI then the IMAGE..
and should be sorted M8 :thum:

 

[karel00]

Thanks, i wil try again, firts i put in ssl87f nfi by webbrowser, then reboot ? and then new image ?

 

[karel00]

I can only find SSL87F bin ???
And then howto ?

 

[Ferret]

I can only find SSL87F bin ???
And then howto ?

Use Dreamup to flash the bin file then reboot. Now try flash any patched image via browser and it should now flash.

 

[karel00]

@Ferret,
any dreamup ? wich one ?
Reading about ferri filler, sunray etc, can i take any dreamup, anf is it wit internet connection or just mini usb to flash bin file, and after that i can flash image treu webbrowser ?
Its second time i wil try, however dont want box to be dead !

 

[Ferret]

Use the latest DreamUP and use mini usb to flash file.

Then reboot the box fully shut down and then put it in browser flashing mode and flash the image.

 

[karel00]

Ok guys, i have tright.
Cant get new SSL87F on ferrari sim, keeps showing ferrari 82
However i got little bit lucky, i got dream elite on it with SSL82F.
Hopefully in future somebody can explane step by step howto get updateted SSl on sim, thanks all !!

 

[Ferret]

Have you tried flashing a prepatched image with ssl87 included ?

 

[karel00]

@Ferret,
yes i have done, however than i get old image older version ???
Booting only says ferrari 82
So not SSL82F