HELP ME VU+DUO

[dji74]

hello

Today I buy a saw with the vu+dueo original off the version original 11.5 from 22/08/2011.
for the past 6.0 or 0.7 or blackhol when I reboot it nothing happens here is the instruction I followed:
for 6.0 :** Brief explanation of DUO's bootloader update **
1. Unzip the duo_cfe_3_0_usb.zip to USB stick.(There should be /vuplus/duo/cfe_cfe_auto.bin)
2. Insert USB stick into the USB port of duo and power on the box.
3. It takes just a few secs to update.
4. If Duo displays the message "Finished..reboot", remove the USB stick and restart box.
5. To update 6.0 image, you should delete the cfe_cfe_auto.bin at /vuplus/duo in USB stick once bootloader update is finished.

for 7 and blackholl :
1-Format usb FAT 32
2-Copy folder flash in /vuplus/duo/..folder flash..
3-when I reboot it nothing happens here is the instruction I followed:

if it please you help me :mecry: :mecry: :mecry::mecry:

 

[dex1971]

probably you need to update the drivers and then upload the new image, I don't use BH but I know several other new images needs some drivers to be updated before being installed

 

[jakas]

go to the bh site

 

[Toufik1967]

Yes try bh you'll be served

 

[bellof]

whats on the display???

box boots thru with old img???
or shows starting???

 

[dji74]

hello,
I have successfully update BLACKHOL 7.2 with USB.
The problem was the two USB (Chinese) that I had not been recognized by
VU DUO but the third (original) it was good so this market
Thank you for your help.