Help Me Please

[masmas]

Hi guys
I have a dm800se clone, I think it is dead because of I have no contact with boxen.
when I start boxen standing on then the monitor R01: NO CA FOUND, and with USB also stands 2nd failed.
they can help me with this.
Thanks :clapping::mecry:

 

[strix]

You must flash a bootloader in your box. Do this with Dream Up! Very simple!

 

[Brummie]

you have flashed a wrong image on it, follow this thread and you should be able to recover it http://www.sat-universe.com/showthread.php?t=211783
what sim is inside the box

 

[masmas]

800se

I can not contact the box using USB or Network
Network message is R01:NO CA FOUND
USB message is 2nd faild

 

[Brummie]

have you installed the drivers for the usb cable so it gives you a virtual com port

 

[masmas]

no it has not done, you know where I can find this

 

[Brummie]

here you go (USB to UART Bridge Virtual COM Port (VCP) driver)
once it gives you the virtual port use that in dreamup

 

[Ferret]

Japhar flasher is the tool to use these days it another patched DreamUP but works very well.

Your still going to need the drivers Brummie has posted and a service and ethernet cable attached for it to work.

 

[masmas]

thanks guys
it seems now:thum: