help install oled picon in all russian image on 800se clone

[freez]

hi , i have 800se sim2.1 with all russian image , i have usb 2GB , i mounted my usb as follows:

it shows on telnet as : dev/sda1
sent this command first :mkfs.ext3 /dev/sda1

now it got linux formats , so i write now:
mount /dev/sda1 /mnt/usb

it will be mounted , when i go to check in my box by looking panels it shows hard disk ( hdd ) not usb , any how

i created a dir for recording movie **** make dir media/hdd/movie
it is ok for recording in my image ( all russian )

i installed barry allen 5.7.2 all ok it is in usb

now this image supporting coloured oled picon , i download it from black pannel for (13e oled picon 800se usb)

it is now in usb , i done hard rebbot & also switched off & in booting barry allen working ok , but noooooooo coloured oled picon is diplayed in my box screen !!!!!!

do i have to change path for picon installed in my usb

the current path is media/usb/picon_oled

i think barry allen created issue for picon!!!!

or what is going on , any advice , any help please

thanx

 

[crille4]

after install BA i had to use media/ba/picon, you can do a symlink if you don't want to move dir

 

[freez]

thanx m8 , i sort it out earlier, actually the hole problem occurs to me coz i dont have inernal hdd , so when i installed first usb it has been shown & mounted as hdd not a usb stick & that was the prob, now i isnert another usb it shown up & mounted as usb stick so , in the second usb i created the coloured media/usb/picon_oled & also i put a skin_user.xml file in /etc/enigma2 , i restarted box
now ok , so u i should have a storage monuted as usb not hdd , other wise box will not c the picon , also another paths to let the coloured oled picon to work depending upon the image as follow:
create folder picon_oled in any of these folders
/media/usb/picon_oled
/usr/share/enigma2/picon_oled/
/media/cf/picon_oled/