Hacking CA system challenge *Tandberg [ NO Keys Allowed in Chat Section/s ]*

[abra26]

to decrypt ECM key new Tandberg uses DES (CBC) I think...

Because encrypted ECM key is 16 bytes long and decrypted ECM key is 8 bytes long so...

 

[utdman]

taken from another forum...
might be useful to some readers?

'Tonight, New firmware of Thai receiver Box [Thaisat RV101 and Thaisat RV102] can decode Asiasat5 image. I hope new firmware of freesat due to end of this month can decode Asiasat5 image too. Thanks for Freesat developer.'

:thum:

 

[marrakr]

It should work ok,since the emu should read the encryption tag and know the ECM use new or old algorithm.

I had both CW in SoftCam.key in vPlug and it was not working.
Maybe order of keys does matter but I did not check. Anyway it does not help to the same id.

 

[kebien]

I had both CW in SoftCam.key in vPlug and it was not working.
Maybe order of keys does matter but I did not check. Anyway it does not help to the same id.

Oh,I see your problem.
Emu is not checking the next key with same ID if first one fails to decrypt.
If you reverse the order and still use the first key means it needs a fix.

It is a case not seen in tandberg yet,I think....
Remember we have all this same problem with other systems,like Biss,same id,different keys,in many providers.

 

[Martin.Wigston]

I just had to delete the old key because there were 2 with same id, best thing to do for now it enter keys in numeric id order and replace old key with new one if it already exists.

 

[ViaHussun]

How found?
http://www.sat-universe.com/showpost.php?p=2036716542&postcount=4

New poc.exe?

Very Thanks Anubis_Ir :thum:

 

[mosaabsat]

yasterday
i add this key
http://www.sat-universe.com/showpost.php?p=2036716504&postcount=262
but not work on strong 4920a
why?

 

[barney115]

At this time New Tandberg Secuirty Feeds do not work in most Sat Recievers Directly .
Only DVB Cards and Via Vplug Server

READ Here => http://www.sat-universe.com/showthread.php?t=297474

 

[mosaabsat]

At this time New Tandberg Secuirty Feeds do not work in most Sat Recievers Directly .
Only DVB Cards and Via Vplug Server

READ Here => http://www.sat-universe.com/showthread.php?t=297474

plz send me data for New Tandberg Secuirty Feeds
for i add on s/w strong 4920a
thx mr barney2222

 

[barney115]

7 East
11021 V 7200 DVB-S2 8PSK
IMG3 EU
When Encrypt in BISS OK ON All Recievers and DVB Cards
When Encrypt in Tandberg Not okay to View Directly on Sat Recievers only DVB Card/Boxes and via Via Vplug Server

10E
11300 H 22500 DVB-S2 8PSK
MPEG 4 - 4:2:0 - HDTV
EPL MUXX Feeds
Encrypted in NEW Tandberg Security Not okay to View Directly on Sat Recievers only DVB Card/Boxes and via Via Vplug Server

FOX NETWORKS GROUP (Turksat 4A 42°E East Beam)
42°E (East Beam) 12461,H,20800,34,8PSK Tandberg
FOX CRIME HD
FOX LIFE HD
FX HD
24 KITCHEN HD

Encrypted in NEW Tandberg Security Not okay to View Directly on Sat Recievers only DVB Card/Boxes and via Via Vplug Server

AS Far as i'm aware that is the Feeds/Channels not currently open on All Sat Recievers due to New Tandberg Security System .
i cannott Test 42°East as i cannott recieve East Turk Beam Signals .

Cheers !

 

[mosaabsat]

7 East
11021 V 7200 DVB-S2 8PSK
IMG3 EU
When Encrypt in BISS OK ON All Recievers and DVB Cards
When Encrypt in Tandberg Not okay to View Directly on Sat Recievers only DVB Card/Boxes and via Via Vplug Server

10E
11300 H 22500 DVB-S2 8PSK
MPEG 4 - 4:2:0 - HDTV
EPL MUXX Feeds
Encrypted in NEW Tandberg Security Not okay to View Directly on Sat Recievers only DVB Card/Boxes and via Via Vplug Server

FOX NETWORKS GROUP (Turksat 4A 42°E East Beam)
42°E (East Beam) 12461,H,20800,34,8PSK Tandberg
FOX CRIME HD
FOX LIFE HD
FX HD
24 KITCHEN HD

Encrypted in NEW Tandberg Security Not okay to View Directly on Sat Recievers only DVB Card/Boxes and via Via Vplug Server

AS Far as i'm aware that is the Feeds/Channels not currently open on All Sat Recievers due to New Tandberg Security System .
i cannott Test 42°East as i cannott recieve East Turk Beam Signals .

Cheers !

but i want new nano
for add s/w strong 4920a
thx

 

[ooOO_SORGOS_OOoo]

7 East
11021 V 7200 DVB-S2 8PSK
IMG3 EU
When Encrypt in BISS OK ON All Recievers and DVB Cards
When Encrypt in Tandberg Not okay to View Directly on Sat Recievers only DVB Card/Boxes and via Via Vplug Server

10E
11300 H 22500 DVB-S2 8PSK
MPEG 4 - 4:2:0 - HDTV
EPL MUXX Feeds
Encrypted in NEW Tandberg Security Not okay to View Directly on Sat Recievers only DVB Card/Boxes and via Via Vplug Server

FOX NETWORKS GROUP (Turksat 4A 42°E East Beam)
42°E (East Beam) 12461,H,20800,34,8PSK Tandberg
FOX CRIME HD
FOX LIFE HD
FX HD
24 KITCHEN HD

Encrypted in NEW Tandberg Security Not okay to View Directly on Sat Recievers only DVB Card/Boxes and via Via Vplug Server

AS Far as i'm aware that is the Feeds/Channels not currently open on All Sat Recievers due to New Tandberg Security System .
i cannott Test 42°East as i cannott recieve East Turk Beam Signals .

Cheers !

Turksat 42 East/Ost
Vplug server + hadu cccam OK
vplug OK

Fausto ( with vplug ) acamd OK

 

[nautilus7]

Hi, I managed to make a patch for oscam-emu to support the new algorithm.



It currently only works with the ecm key present, so you need to find the key with poc first. But you can then add the key into softcam.key and watch through your stb box using oscam-emu.

The patch is based on source code from poc.exe. I'll made a pull request to oscam-emu repository with the changes.

Here's an oscam-emu bin for openpli based images for you to play with until my changes are accepted to officail git repo.

https://www.sendspace.com/file/osgfs3

 

[WilaMare]

Please,upload source oscam emu patch

 

[nautilus7]

It's already up: https://github.com/oscam-emu/oscam-emu/pull/214

Just not committed yet.

 

[uglylove]

Hi, I managed to make a patch for oscam-emu to support the new algorithm.



It currently only works with the ecm key present, so you need to find the key with poc first. But you can then add the key into softcam.key and watch through your stb box using oscam-emu.

The patch is based on source code from poc.exe. I'll made a pull request to oscam-emu repository with the changes.

Here's an oscam-emu bin for openpli based images for you to play with until my changes are accepted to officail git repo.

https://www.sendspace.com/file/osgfs3

First of all Thank you very much for new patch.
The other hand, Oscam emu has problem. I can't open new thread about oscam problem in github. I wrote all what i saw with error codes here.
http://www.sat-universe.com/showthread.php?t=297496
Can you deal with it? Thank you again.

 

[nautilus7]

I don't know. I compiled against latest svn 12779, with no problem.

It must be your config or your binary you have that is in fault there.

 

[uglylove]

I don't know. I compiled against latest svn 12779, with no problem.

It must be your config or your binary you have that is in fault there.

Maybe thread irrelevant about it.Sorry for that and thanks your reply.
It can't be configuration fault i tested with different version oscam binary.All works good to version 11272.Newer version has problem.

 

[nautilus7]

Someone to find (with poc) the current key in IMG EPL feed?

2016/11/02 17:58:43 3258D8C8 r [Emu] Key not found: T 6B9 01
2016/11/02 17:58:43 3258D8C8 r [Emu] ECM failed: Key not found

 

[Dave5118]

Someone to find (with poc) the current key in IMG EPL feed?

2016/11/02 17:58:43 3258D8C8 r [Emu] Key not found: T 6B9 01
2016/11/02 17:58:43 3258D8C8 r [Emu] ECM failed: Key not found

Can confirm your Oscam emu patch is working fine here
:thum: