gamma card + jsc card ( viaccess ) config 4 vu + duo

[guli]

hi i am new to this protocol , so i need your assistance . i am looking for the config for running a gamma card + jsc card ( viaccess ) on the same vu + duo .
i am running vti duo 2.2 + cccam 2.1.1 .does anyone know how to get the ecm working in this image
thanks in advance

 

[Ferret]

The JSC card can be directly read using CCcam. The gamma card can also be read using CCcam but im not 100% sure the VU Duo readers handle it. Maybe another member has experiance of the Gamma i a VU.

You can try your self just add this to the CCcam config found at \etc.

CAMKEY : /dev/sci0/0 00 00 00 00 00 00 00 00
CAMDATA : /dev/sci0/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/sci0/0
SMARTCARD CLOCK FREQUENCY : /dev/sci0/0 6000000

And

CAMKEY : /dev/sci1/0 00 00 00 00 00 00 00 00
CAMDATA : /dev/sci1/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/sci1/0
SMARTCARD CLOCK FREQUENCY : /dev/sci1/0 6000000


Try both card slots as the upper slot is embedded conax reader, lower slot is a Xcrypt reader.

Ferret

 

[bassethound]

thanks ferret

 

[unknown]

Hi guys recieved my iredto card today! (my first card ever) I put it in but I only get blank picture but I get green on I and ECM though. Do I need to activate it?(on CCAM 2.2.1)
http://i51.tinypic.com/2ch75eq.jpg

 

[unknown]

The JSC card can be directly read using CCcam. The gamma card can also be read using CCcam but im not 100% sure the VU Duo readers handle it. Maybe another member has experiance of the Gamma i a VU.

You can try your self just add this to the CCcam config found at \etc.

CAMKEY : /dev/sci0/0 00 00 00 00 00 00 00 00
CAMDATA : /dev/sci0/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/sci0/0
SMARTCARD CLOCK FREQUENCY : /dev/sci0/0 6000000

And

CAMKEY : /dev/sci1/0 00 00 00 00 00 00 00 00
CAMDATA : /dev/sci1/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/sci1/0
SMARTCARD CLOCK FREQUENCY : /dev/sci1/0 6000000


Try both card slots as the upper slot is embedded conax reader, lower slot is a Xcrypt reader.

Ferret

Ok I worked it mate!

using @

EMM THREADS : 1
SMARTCARD CLOCK FREQUENCY: /dev/sci0 6000000
SMARTCARD SID ASSIGN : /dev/sci0 10 { 20F5,20F6,20F7,20F8,20F9,20FA,20FB,20FC,20FD,20FE }
CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00
CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/sci0

Should be ok?