Hi Ferret, I followed these instructions but it's still stuck on calculating checksum. I have a 2.01sim bl82 dm800 pro and just can't flash because of the no ca error.I know the i.p. addy it's 192.168.1.2 but it can't get the cure to work.Any ideas?Try this method mate with the files from the link it will force the flash button to bacome active.
OK mate
Try this hacked DreamUP for clones
http://www.sat-universe.com/showthread.php?t=141826
To use
1. Connect you null cable to the 800 with no power supply connected.
2. Unpack the 2nd stage pack and go in to the folder named different method.
3. Start DreamUp and when it finds you 800 apply the power to the 800, ignore the error message you getting.
4. Now execute the enforcer.exe and press on enable.
You should now see the flash button and be able to select your image and flash it.
Ferret
Hi Ferret, I followed these instructions but it's still stuck on calculating checksum. I have a 2.01sim bl82 dm800 pro and just can't flash because of the no ca error.I know the i.p. addy it's 192.168.1.2 but it can't get the cure to work.Any ideas?
john107;840556 I do actually have the serial mode message on the box and an ip though.I have changed to dreamup though to get it to do this..[/QUOTE said:When it gave you the ip did you then try browser flashing ?
You should also be able to flash with the flash button on DreamUP
Just keep trying the above method it will connect right if your giving it a proper IP try another ip in the range say 192.168.1.20
I still can not update fw for dm800.
I used DM800 Clone
Try this method mate with the files from the link it will force the flash button to bacome active.
OK mate
Try this hacked DreamUP for clones
http://www.sat-universe.com/showthread.php?t=141826
To use
1. Connect you null cable to the 800 with no power supply connected.
2. Unpack the 2nd stage pack and go in to the folder named different method.
3. Start DreamUp and when it finds you 800 apply the power to the 800, ignore the error message you getting.
4. Now execute the enforcer.exe and press on enable.
You should now see the flash button and be able to select your image and flash it.
Ferret