sh: you need to specify whom to kill
sh: you need to specify whom to kill
killall: mgcamd-1.33: no process killed
killall: newcs-1.67: no process killed
This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 12:01:03
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
TCP-log set to simple mode
level: verbose
type: init
output: all
logger config: level 2 type 3 output 255
Console log options: level 2 type 3
log file:
logger: cant open file , file log disabled
udp log: host 192.168.1.10 port 1000
UDP log options: level 2 type 3
TCP log options: level 2 type 3
[ 15:50:57 ] [ Box detect ] Box type 9 (Kathrein (ST) HD Box)
[ 15:50:57 ] [ Config ] Option <blockc0> for device 0 (lower) not present, defaulting to NO
[ 15:50:57 ] [ Config ] Option <Seca-PPV> for device 0 (lower) not present, defaulting to NO
[ 15:50:57 ] [ Config ] Option <mhz> for device 0 (lower) not present, defaulting to 357
[ 15:50:57 ] [ Config ] /dev/sci0 ECM priority: round
[ 15:50:57 ] [ Config ] Option <blockc0> for device 1 (upper) not present, defaulting to NO
[ 15:50:57 ] [ Config ] Option <Seca-PPV> for device 1 (upper) not present, defaulting to NO
[ 15:50:57 ] [ Config ] Option <mhz> for device 1 (upper) not present, defaulting to 357
[ 15:50:57 ] [ Config ] /dev/sci1 ECM priority: round
[ 15:50:58 ] [ Config ] Option <spider> not present for User: dummy, defaulting to NO
[ 15:50:58 ] [ Config ] Option <spider> not present for User: dummy, defaulting to NO
[ 15:50:58 ] [ EMM Cache ] Initialising dynamic Cache
[ 15:50:58 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 1221
[ 15:50:58 ] Calibrating delay loops
[ 15:50:58 ] usleep(5) takes: 0 s 15 us
[ 15:50:58 ] usleep(10) takes: 0 s 20 us
[ 15:50:58 ] usleep(100) takes: 0 s 109 us
[ 15:50:58 ] usleep(500) takes: 0 s 509 us
[ 15:50:58 ] Allocation memory for 200 regular users
[ 15:50:58 ] [ Loader ] Starting Telnet on port 3001
[ 15:50:58 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 15:50:58 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 15:50:58 ] [ Sci ] Opening device /dev/sci0
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 15:50:58 ] [ Sci ] resetting card now
[ 15:50:58 ] [ Sci ] Reset
[ 15:50:59 ] [ Sci ] Card reset
[ 15:51:00 ] [ ATR ] T=0 1etu=372.00us Guardtime:12etu WWT:9600etu
[ 15:51:00 ] [ ATR ] Historical bytes: 0 B 0 0
[ 15:51:00 ] [ Loader ] Init Conax card
[ 15:51:04 ] [ Loader ] Card 0B00 on port /dev/sci0 failed
[ 15:51:04 ] [ Loader ] Starting Newcamd Server on port 10110
[ 15:51:04 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 15:51:04 ] [ Newcamd ] Newcamd thread Server started on port 10110
newcamd: main loop
[ 15:51:04 ] [ Sci ] Closing device /dev/sci1 [Handle=-1]
[ 15:51:04 ] [ Sci ] Opening device /dev/sci1
SCI returned -1 on IOCTL IOCTL_SET_PARAMETERS
[ 15:51:04 ] [ Sci ] No card present in reader
[ 15:51:04 ] [ Loader ] Reset failed ...
[ 15:51:04 ] [ Loader ] Starting Newcamd Server on port 10010
[ 15:51:04 ] [ NewCS ] Ready to GO!
[ 15:51:04 ] [ Newcamd ] Newcamd thread Server started on port 10010
newcamd: main loop
tuxbox mgcamd v1.33 by mixvt (compiled May 31 2009 19:41:08)
[mg] Net:9:7:2:1s Show ecm:0, emm:0 Up:0 Au:0 Dir:0 Osd:no:80:0 Cache:6 Log:3:172.16.1.1:28007 Reread:0
[mg] Ecm cache time: 15
Box type: fortis
Conax.Key error 2: No such file or directory
Keys readed
Conax.Key error 2: No such file or directory
[config] newcamd route = ipbox:127.0.0.1:10110 server cardserver
[config] newcamd route = ipbox:127.0.0.1:10010 server cardserver
newcamd keep alive: 300, incoming port: 0
[mgcam] emm thread started
I found ! res 0
Peer host: peer1.dyndns.com Peer pass: ABCD1234 port: 3471 my port: 2471
Peer host: peer2.dyndns.com Peer pass: 6789ABCD port: 3471 my port: 2471
Me: host my.dyndns.com id B9F9 port 0 max send 5 max dist 10
Virtual card 0500:007C00 slot 1
Virtual card 1801:000401 slot 2
Virtual card 1801:000501 slot 2
Virtual card 1801:004001 slot 3
Virtual card 1801:004101 slot 3
Resend time: normal 2000 3000, *** 400 500
Ports to monitor: 2471
Preffered ids: 1234 ABCD
Host lookup of peer1.dyndns.com failed
Host lookup of peer2.dyndns.com failed
[mgcamd] tps update started.
/var/keys/tps.bin error 2: No such file or directory
[newcamd] Connecting to 127.0.0.1:10110...
[newcamd] Connecting to 127.0.0.1:10010...
[ 15:51:23 ] [ Newcamd:10110 ] User ipbox logged in, client: Mgcamd
[newcamd] Login to 127.0.0.1:10110 as ipbox accepted (14ms)
[newcamd] Card data from 127.0.0.1:10110 (22ms):
EMM enabled: UA yes SA yes GA yes, Card serial: 0
Userid 1 caid 0 providers 1
Idents: 000000
ids: 0
[ 15:51:23 ] [ Newcamd:10010 ] User ipbox logged in, client: Mgcamd
[newcamd] Login to 127.0.0.1:10010 as ipbox accepted (33ms)
[newcamd] Card data from 127.0.0.1:10010 (41ms):
EMM enabled: UA yes SA yes GA yes, Card serial: 0
Userid 1 caid 0 providers 1
Idents: 000000
ids: 0